Fulvestrant (S enantiomer)

Synonyms: ICI 182780 (S enantiomer); ZD 9238 (S enantiomer); ZM 182780 (S enantiomer)
Fulvestrant (ICI 182780; ZD 9238) S enantiomer 是高效雌激素受体抑制剂 Fulvestrant (MS-S35194) 的 S 型对映异构体,后者通过结合并阻断雌激素受体、促进其降解,进而抑制受体二聚化、核质穿梭及转录活性,有效阻断雌激素信号传导、MAPK 通路激活与 ER 调控的蛋白表达,并能诱导细胞凋亡 (apoptosis)、抑制乳腺癌和催乳素瘤细胞增殖,还能降低成骨前体细胞的矿化水平、碱性磷酸酶活性及骨钙素表达;若在产前暴露于 Fulvestrant,会损伤卵巢卵泡发育并引发卵巢结构损伤,因此 Fulvestrant 已被广泛应用于乳腺癌和催乳素瘤等相关研究中。
产品编号: MS-M40677 CAS No.: 1316849-17-8 分子式: C32H47F5O3S 分子量: 606.77
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Fulvestrant (ICI 182780; ZD 9238) S enantiomer 是高效雌激素受体抑制剂 Fulvestrant (MS-S35194) 的 S 型对映异构体,后者通过结合并阻断雌激素受体、促进其降解,进而抑制受体二聚化、核质穿梭及转录活性,有效阻断雌激素信号传导、MAPK 通路激活与 ER 调控的蛋白表达,并能诱导细胞凋亡 (apoptosis)、抑制乳腺癌和催乳素瘤细胞增殖,还能降低成骨前体细胞的矿化水平、碱性磷酸酶活性及骨钙素表达;若在产前暴露于 Fulvestrant,会损伤卵巢卵泡发育并引发卵巢结构损伤,因此 Fulvestrant 已被广泛应用于乳腺癌和催乳素瘤等相关研究中。

生物实验数据

生物活性 Fulvestrant (ICI 182780; ZD 9238) S enantiomer is the S-enantiomer of the potent estrogen receptor inhibitor Fulvestrant (MS-S35194), which binds to and blocks the estrogen receptor, promotes its degradation, and thereby inhibits receptor dimerization, nucleocytoplasmic shuttling, and transcriptional activity; it effectively blocks estrogen signaling, MAPK pathway activation, and ER-regulated protein expression, induces apoptosis, inhibits the proliferation of breast cancer and prolactinoma cells, and reduces mineralization levels, alkaline phosphatase activity, and osteocalcin expression in osteoblast precursor cells; prenatal exposure to Fulvestrant impairs ovarian follicular development and causes ovarian structural damage, and Fulvestrant has therefore been widely used in research related to breast cancer and prolactinoma.
体外研究
(In Vitro)

Fulvestrant (5-625 nM; 72 h) 可剂量依赖性地抑制 MMQ 泌乳素瘤细胞的增殖,处理 72 h 后的 IC50 为 32.4 nM。
Fulvestrant (1-625 nM; 72 h) 可呈剂量依赖性地促进 MMQ 泌乳素瘤细胞凋亡,625 nM 时总凋亡率达 84.21%。
Fulvestrant (1-625 nM; 72 h) 在处理 MMQ 催乳素瘤细胞 72 小时后,可剂量依赖性地抑制 MAPK 通路蛋白 p-ERK1/2、p-JNK 和 p-p38 的激活,同时不改变总 MAPK 蛋白水平。

Western Blot Analysis

Cell Line: MMQ prolactinoma cells
Concentration: 1-625 nM
Incubation Time: 72 h
Result: Decreased expression of activated phosphorylated ERK1/2, JNK, and p38 proteins in MMQ cells in a dose-dependent manner.
Showed no effect on total non-phosphorylated ERK1/2, JNK, or p38 protein levels.
Reduced the p-ERK1/2/β-actin ratio from 0.81 in controls to 0.14 at 625 nM.
Reduced the p-JNK/β-actin ratio from 0.92 in controls to 0.26 at 625 nM.
Reduced the p-p38/β-actin ratio from 0.9 in controls to 0.31 at 625 nM.

化学信息

分子量 606.77
分子式 C32H47F5O3S
CAS No. 1316849-17-8
别名 ICI 182780 (S enantiomer); ZD 9238 (S enantiomer); ZM 182780 (S enantiomer)

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础