TFLLR-NH2是一种选择性PAR1激动剂,其EC50值为1.9 μM。
产品编号: MS-M39884 纯度: 99.04% CAS No.: 197794-83-5 分子式: C31H53N9O6 分子量: 647.81
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

TFLLR-NH2是一种选择性PAR1激动剂,其EC50值为1.9 μM。

生物实验数据

生物活性 TFLLR-NH2 is a selective PAR1 agonist with an EC50 value of 1.9 μM.
IC50 & Target PAR1:1.9 μM(EC50)
体外研究
(In Vitro)

PAR1 agonists stimulate concentration-dependent increases in [Ca2+]i and in the proportions of neurones. The maximal increase in [Ca2+]i above basal is detected in response to 10?μm TF-NH2(peak 196.5±20.4?nM, n=25) when 50–80% of identified neurones responded. SW620 cells cultured in the supernatant of TFLLR-NH2-activated platelets upregulate E-cadherin expression and downregulate the vimentin expression. In the in vitro platelet culture system, a TFLLR-NH2 dose-dependent increase of secreted TGF-β1 is detected in the supernatant.

体内研究
(In Vivo)

Injection of TF-NH2 into the rat paw stimulates a marked and sustained oedema. An NK1R antagonist and ablation of sensory nerves with capsaicin inhibit oedema by 44% at 1?h and completely by 5?h. In wild-type but not PAR1?/? mice, TF-NH2 stimulates Evans blue extravasation in the bladder, oesophagus, stomach, intestine and pancreas by 2–8 fold. Extravasation in the bladder, oesophagus and stomach is abolished by an NK1R antagonist. TFp-NH2 produces notable contraction at 3-50 μM and relaxation at 0.3-50 μM, in the absence of apamin. The concentration-response curve for TFp-NH2-induced contraction is remarkably shifted left, when the TFp-NH2-induced relaxation is blocked by apamin at 0.1 μM.

性状 固体
颜色 White to off-white

化学信息

分子量 647.81
分子式 C31H53N9O6
CAS No. 197794-83-5

储存&溶解度

储存方式

Sealed storage, away from moisture

Powder -80°C 2 years
-20°C 1 year

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 100 mg/mL (154.37 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

H2O 中的溶解度 : ≥ 100 mg/mL (154.37 mM)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO / H2O1 mM1.5437 mL7.7183 mL15.4366 mL38.5916 mL
5 mM0.3087 mL1.5437 mL3.0873 mL7.7183 mL
10 mM0.1544 mL0.7718 mL1.5437 mL3.8592 mL
15 mM0.1029 mL0.5146 mL1.0291 mL2.5728 mL
20 mM0.0772 mL0.3859 mL0.7718 mL1.9296 mL
25 mM0.0617 mL0.3087 mL0.6175 mL1.5437 mL
30 mM0.0515 mL0.2573 mL0.5146 mL1.2864 mL
40 mM0.0386 mL0.1930 mL0.3859 mL0.9648 mL
50 mM0.0309 mL0.1544 mL0.3087 mL0.7718 mL
60 mM0.0257 mL0.1286 mL0.2573 mL0.6432 mL
80 mM0.0193 mL0.0965 mL0.1930 mL0.4824 mL
100 mM0.0154 mL0.0772 mL0.1544 mL0.3859 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础