Anhydrohirundigenin mono-thevetoside

Anhydrohirundigenin mono-thevetoside 是一种凋亡 (apoptosis) 诱导剂,可上调 caspase-3、caspase-9 和 Bax 的表达水平并下调 Bcl-2 的表达水平,诱导细胞周期停滞于 G1 期,可用于肝癌、肺癌、乳腺癌的相关研究。
产品编号: MS-M34007 CAS No.: 849201-83-8 分子式: C28H40O8 分子量: 504.61
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Anhydrohirundigenin mono-thevetoside 是一种凋亡 (apoptosis) 诱导剂,可上调 caspase-3、caspase-9 和 Bax 的表达水平并下调 Bcl-2 的表达水平,诱导细胞周期停滞于 G1 期,可用于肝癌、肺癌、乳腺癌的相关研究。

生物实验数据

生物活性 Anhydrohirundigenin mono-thevetoside is an apoptosis inducer that upregulates the expression levels of caspase-3, caspase-9, and Bax while downregulating the expression level of Bcl-2, induces cell cycle arrest at the G1 phase, and can be used for research related to liver cancer, lung cancer, and breast cancer.
IC50 & Target

Caspase 3

 

Caspase 9

 

Caspase 8

 

Bax

 

Bcl-2

 

体外研究
(In Vitro)

Anhydrohirundigenin mono-thevetoside (Compound 4) (0.1-100 μM; 48 h) 可在体外强效抑制 A549、HepG2 和 4T1 细胞的活力,其中对 HepG2 细胞的活性最强 (IC50 = 12.24 μM)。
Anhydrohirundigenin mono-thevetoside (1-20 μM; 48 h) 可在处理 48 h 后诱导 HepG2 细胞发生剂量依赖性 G1 期细胞周期阻滞,并诱导细胞凋亡。
Anhydrohirundigenin mono-thevetoside (1-20 μM; 48 h) 以剂量依赖方式上调 HepG2 细胞中 caspase-3、caspase-9 和 Bax 的表达,并下调 caspase-8 和 Bcl-2 的表达。

Cell Cytotoxicity Assay

Cell Line: A549, HepG2, 4T1
Concentration: 0.1, 10, 20, 40, 60, 80 and 100 μM
Incubation Time: 48 h
Result: Exhibited inhibitory activity with IC50 values of 26.82 μM in A549 cells, 12.24 μM in HepG2 cells, and 44.12 μM in 4T1 cells.
Inhibited HepG2 cell viability in a dose-dependent manner.

Apoptosis Analysis

Cell Line: HepG2
Concentration: 1, 10 and 20 μM
Incubation Time: 48 h
Result: Induced apoptosis in a concentration-dependent manner.
Caused 52.60% early apoptosis and 11.89% late apoptosis at 1 μM.
Caused 55.91% early apoptosis and 12.12% late apoptosis at 10 μM.
Caused 63.18% early apoptosis and 15.39% late apoptosis at 20 μM.

Cell Cycle Analysis

Cell Line: HepG2
Concentration: 1, 10 and 20 μM
Incubation Time: 48 h
Result: Induced G1 phase cell cycle arrest.
Increased the percentage of cells in G0-G1 phase from 68.80% (control) to 76.00% (10 μM) and 82.27% (20 μM).
Increased the apoptotic cell rate from 0.43% (control) to 8.70% (10 μM) and 12.62% (20 μM).

Western Blot Analysis

Cell Line: HepG2
Concentration: 1, 10 and 20 μM
Incubation Time: 48 h
Result: Upregulated the expression levels of caspase-3, caspase-9, and Bax in a dose-dependent manner.
Downregulated the expression levels of caspase-8 and Bcl-2 in a dose-dependent manner.

化学信息

分子量 504.61
分子式 C28H40O8
CAS No. 849201-83-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础