2-Hydroxysaclofen

2-Hydroxysaclofen 是一种有效的 γ 氨基丁酸转氨酶 B (GABAB) 受体拮抗剂,可消除尼古丁诱导的低运动效应并增强其镇痛作用,还能刺激雌性大鼠促黄体生成素 (LH) 分泌。
产品编号: MS-M25196 纯度: 98.0% CAS No.: 117354-64-0 分子式: C9H12ClNO4S 分子量: 265.71
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价

产品描述

2-Hydroxysaclofen 是一种有效的 γ 氨基丁酸转氨酶 B (GABAB) 受体拮抗剂,可消除尼古丁诱导的低运动效应并增强其镇痛作用,还能刺激雌性大鼠促黄体生成素 (LH) 分泌。

生物实验数据

生物活性 2-Hydroxysaclofen is a potent γ-aminobutyric acid transaminase B (GABAB) receptor antagonist that eliminates nicotine-induced hypolocomotion, enhances its analgesic effect, and stimulates luteinizing hormone (LH) secretion in female rats.
IC50 & Target

GABAB receptor

体内研究
(In Vivo)

2-Hydroxysaclofen (0.25-1 mg/kg; IP; single dosage) abolishes nicotine hypolocomotor effects and increases the antinociceptive effects of nicotine.
2-Hydroxysaclofen (0.3-3 mg/kg; IP; single dosage) reduces the effects of Baclofen (a GABA receptor agonist) on d-amphetamine-induced discriminative cue.
2-Hydroxysaclofen (0-100 μg/2 μl; ICV; single dosage) produces a rapid elevation in the serum LH concentration in the estrogen-primed ovariectomized rat.

Animal Model: Male Swiss Webster mice (22-24 g; treated with 3 mg/kg nicotine)
Dosage: 0.25, 0.5 and 1 mg/kg
Administration: IP; single dosage; after 10 or 45 min of nicotine administration
Result: Abolished nicotine hypolocomotor effects at 1 mg/kg, and increased the antinociceptive effects of nicotine at 1 mg/kg.
Animal Model: Male Wistar rats
Dosage: 0.3, 1 and 3 mg/kg
Administration: IP; single dosage
Result: Reduced the effects of Baclofen on d-amphetamine-induced discriminative cue.
Animal Model: Female Wistar rats (8 weeks)
Dosage: 0, 20, 50 or 100 μg/2 μL
Administration: ICV; single dosage
Result: Produced a rapid elevation in the serum LH concentration in the estrogen-primed ovariectomized rat with a dose-dependent manner, and the peak LH values were observed 10 min after the injection.
The effect was dose-dependent, as 0 or 20 μg of the antagonist was ineffective while a pronounced effect was observed after the injection of 50 or 100 μg.
性状 固体
颜色 White to off-white

化学信息

分子量 265.71
分子式 C9H12ClNO4S
CAS No. 117354-64-0

储存&溶解度

储存方式

-20°C, protect from light, stored under nitrogen

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : 50 mg/mL (188.18 mM; ultrasonic and adjust pH to 11 with 1 M NaOH)

1M NaOH 中的溶解度 : 26.57 mg/mL (100.00 mM; 超声加热助溶)

可选溶剂浓度1 mg5 mg10 mg25 mg
1M NaOH / H2O1 mM3.7635 mL18.8175 mL37.6350 mL94.0875 mL
5 mM0.7527 mL3.7635 mL7.5270 mL18.8175 mL
10 mM0.3764 mL1.8818 mL3.7635 mL9.4088 mL
15 mM0.2509 mL1.2545 mL2.5090 mL6.2725 mL
20 mM0.1882 mL0.9409 mL1.8818 mL4.7044 mL
25 mM0.1505 mL0.7527 mL1.5054 mL3.7635 mL
30 mM0.1255 mL0.6273 mL1.2545 mL3.1363 mL
40 mM0.0941 mL0.4704 mL0.9409 mL2.3522 mL
50 mM0.0753 mL0.3764 mL0.7527 mL1.8818 mL
60 mM0.0627 mL0.3136 mL0.6273 mL1.5681 mL
80 mM0.0470 mL0.2352 mL0.4704 mL1.1761 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础