RKER-216 是一种靶向 ALK2 的人源单克隆 IgG 抗体抑制剂(KD 为 58.7 pM),它通过与 BMP 配体竞争结合 ALK2 的胞外结构域来抑制 BMP-SMAD 信号通路,从而降低 Hep3B 细胞中的铁调素转录水平,并在体内通过抑制 SMAD 信号通路降低铁调素、促进铁吸收与利用,在炎症条件下还能有效动员组织铁,因此可用于炎症性贫血的相关研究。
RKER-216
产品编号: MS-M11160
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价

产品描述

RKER-216 是一种靶向 ALK2 的人源单克隆 IgG 抗体抑制剂(KD 为 58.7 pM),它通过与 BMP 配体竞争结合 ALK2 的胞外结构域来抑制 BMP-SMAD 信号通路,从而降低 Hep3B 细胞中的铁调素转录水平,并在体内通过抑制 SMAD 信号通路降低铁调素、促进铁吸收与利用,在炎症条件下还能有效动员组织铁,因此可用于炎症性贫血的相关研究。

生物实验数据

生物活性 RKER-216 is a human monoclonal IgG antibody inhibitor targeting ALK2 with a KD of 58.7 pM that inhibits the BMP-SMAD signaling pathway by competing with BMP ligands for binding to the extracellular domain of ALK2, thereby reducing hepcidin transcription levels in Hep3B cells and, in vivo, lowering hepcidin through SMAD signaling pathway inhibition to promote iron absorption and utilization, while also effectively mobilizing tissue iron under inflammatory conditions, making it useful for research related to anemia of inflammation.
IC50 & Target

ACVR1

58.7 pM (Kd)

体外研究
(In Vitro)

RKER-216 (compound m216) (0.02-1 μg/mL,6 小时) 以 58.7 pM 的 KD 值结合 ALK2,且在比结合 ALK2 所需浓度高 10 倍的条件下仍不结合 ALK3。
RKER-216 在 HepG2 和 Huh7 细胞的 ACVR1 敲除模型中,以 92.2% 的高肽段覆盖率实现与 ALK2 的潜在相互作用。
RKER-216 (0.02-30 μg/mL, 6小时) 在 Hep3B 细胞 (0.02-1 μg/mL)、HepG2 细胞 (ACVR1 敲除) 以及 Huh7 细胞 (ACVR1 敲除) 中,均能抑制 ALK2 介导的铁调素转录。

Real Time qPCR

Cell Line: Hep3B, HepG2 (ACVR1 knockout (KO)), and Huh7 cell (ACVR1 knockout (KO)) cell lines
Concentration: 0.02, 0.2 and 1 μg/mL and 0, 1, 10 and 30 μg/mL
Incubation Time: 6 h
Result: Resulted HAMP mRNA a dose dependent decrease (0.02, 0.2 and 1 μg/mL) in Hep3B cells.
Exhibited the greatest suppression in BMP6-stimulated hepcidin expression, followed by BMP2/6 and BMP2 in Hep3B cells at 0-1 μg/mL.
Did not decreased HAMP mRNA at 1-30 μg/mL in HepG2 (ACVR1 knockout (KO)) and Huh7 (ACVR1 knockout (KO)) cell lines.
体内研究
(In Vivo)

RKER-216 (3 mg/kg,单次皮下注射) 可在 B6N 小鼠中抑制 ALK2,在不损害 IL-6 介导的铁调素诱导作用的同时通过抑制 SMAD1/5/9 信号通路降低整体铁调素分泌。
RKER-216 (compound m216) (1-3 mg/kg,皮下注射,单次给药,药效持续 6、24 或 96 小时) 在 TMPRSS6 基因敲除小鼠中通过抑制 SMAD 信号通路降低血清铁调素,从而促进铁吸收并提高转铁蛋白饱和度。
RKER-216 (1 mg/kg,皮下注射,每日两次,持续 9 天) 在 TMPRSS6 基因敲除小鼠中通过一种区别于静脉补铁的独特机制调节铁代谢。
RKER-216 (1-3 mg/kg,皮下注射,每日两次,持续 3 周) 在改善 TMPRSS6 基因敲除小鼠的小细胞性贫血方面呈现出剂量相关的缓解效果。

Animal Model: B6N male mice (7 weeks)
Dosage: 3 mg/kg
Administration: s.c. once followed by LPS (1 mg/kg, i.p.)
Result: Induced Liver Il6 mRNA and decreased serum IL-6.
Resulted a greater fold-change ((11.7-fold for Hamp mRNA and 3.2-fold for serum hepcidin).
Inhibited SMAD1/5/9 phosphorylation regardless of inflammatory status.
Failed to impair LPS-mediated STAT3 phosphorylation, and the same LPS-induced effect was seen in isotype control groups in immunoblot analyses.
Animal Model: TMPRSS6 KO mice (8-11 weeks)
Dosage: 1 or 3 mg/kg
Administration: s.c., once, persisted for 6, 24 or 96 h
Result: Decreased liver smAD1/5/9 phosphorylation, hepcidin (Hamp) mRNA, and serum hepcidin levels dosed with 1 or 3 mg/kg for 6 h.
Decreased serum hepcidin by 88% and increased TSAT by 4-fold at 1 or 3 mg/kg for 24 h.
Had sustained effects by 96 h at 3 mg/kg.

化学信息

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础