Zinc borate 是一种具有成骨诱导、促血管生成、抗氧化、抗诱变及细胞毒性等特性的生物活性无机物,在骨组织工程领域常被掺入壳聚糖支架中,通过释放锌离子和硼离子诱导人牙髓干细胞向成骨细胞分化、上调骨相关基因表达并促进钙沉积,同时通过上调血管内皮生长因子等关键因子促进血管形成,还表现出清除自由基的抗氧化能力并能特异性降低特定条件下的致突变性,此外虽会降低小鼠成纤维细胞的存活率,但可用于骨组织工程相关研究。
产品编号: MS-L96100 CAS No.: 1332-07-6 分子式: Zn3(BO3)2 分子量: 313.76
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
100g
询价
3-5 天
500g
询价
3-5 天
1kg
询价
3-5 天

产品描述

Zinc borate 是一种具有成骨诱导、促血管生成、抗氧化、抗诱变及细胞毒性等特性的生物活性无机物,在骨组织工程领域常被掺入壳聚糖支架中,通过释放锌离子和硼离子诱导人牙髓干细胞向成骨细胞分化、上调骨相关基因表达并促进钙沉积,同时通过上调血管内皮生长因子等关键因子促进血管形成,还表现出清除自由基的抗氧化能力并能特异性降低特定条件下的致突变性,此外虽会降低小鼠成纤维细胞的存活率,但可用于骨组织工程相关研究。

生物实验数据

生物活性 Zinc borate is a bioactive inorganic material possessing osteoinductive, pro-angiogenic, antioxidant, antimutagenic, and cytotoxic properties, and is commonly incorporated into chitosan scaffolds in the field of bone tissue engineering; by releasing zinc ions and boron ions, it induces the osteogenic differentiation of human dental pulp stem cells, upregulates bone-related gene expression, and promotes calcium deposition, while also promoting angiogenesis by upregulating key factors such as vascular endothelial growth factor, and it exhibits free radical-scavenging antioxidant capacity and can specifically reduce mutagenicity under certain conditions; furthermore, although it reduces the viability of mouse fibroblasts, it can be used in bone tissue engineering-related research.
IC50 & Target

RUNX2

 

体外研究
(In Vitro)

Zinc borate (1.0% (w/v); 7-21 d) 负载于壳聚糖支架时,可支持脱落乳牙干细胞 (SHEDs),使细胞存活率显著提升,在 570 nm 处的吸光度值分别约为 0.29、0.41 和 0.57;还使 ALP 活性显著上调。
Zinc borate (1.0% (w/v); 7-21 d) 在壳聚糖支架中可支持 SHEDs,使其在成骨分化过程中显著上调成骨相关基因 (Runx2,OPN 和 OCN) 及血管生成相关基因 (VEGF、Ang-1) 的表达。
Zinc borate (1 mg/mL; 30 min) 在无细胞实验中表现出较低的 DPPH 自由基清除活性,在 1 mg/mL 时的抑制率为 13.50%。
Zinc borate (0.04-0.2 mg; 72 h) 对 4-NPD 诱导的鼠伤寒沙门氏菌 TA98 菌株致突变性表现出低抗突变活性,但在 TA100 菌株中对叠氮化钠诱导的致突变性无抗突变活性。
Zinc borate (0.3-76.19 μg/mL; 24-72 h) 对小鼠成纤维细胞 L929 表现出细胞毒性,其在 24 h 时的 IC50 值为 40.70 μg/mL,在 72 h 时为 32.93 μg/mL。

Real Time qPCR

Cell Line: stem cells from human exfoliated deciduous teeth (SHEDs)
Concentration: 1.0% (w/v)
Incubation Time: 7, 14, 21 days (cell culture); 45 cycles (RT-PCR)
Result: Showed the highest expression of Runx2 after 14 days of culture.
Showed the highest expression of OPN and OCN after 21 days of culture.
Exhibited high expression of VEGF and Ang-1 across culture time points.
Had all gene expression levels significantly higher than those in pure chitosan scaffolds.

Immunofluorescence

Cell Line: stem cells from human exfoliated deciduous teeth (SHEDs)
Concentration: 1.0% (w/v)
Incubation Time: 7, 21 days (cell culture); 1 h (primary antibody incubation); 1 h (secondary antibody incubation)
Result: Showed notable expression of the early osteoblastic marker BMP-2 after 7 days of culture.
Showed notable expression of the late osteoblastic marker OCN after 21 days of culture.
性状 固体
颜色 White to off-white

化学信息

分子量 313.76
分子式 Zn3(BO3)2
CAS No. 1332-07-6

储存&溶解度

储存方式

Store at room temperature, keep dry and cool

In solvent -80°C 1 year
-20°C 6 months
运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础