ANT308 TFA 是一种血管活性肠肽 (VIP receptor) 拮抗剂,可显著增强 T 细胞的活化和增殖,并通过抑制 VIP-VPAC2 信号传导及降低 MCAM 和 N-cadherin 的表达来抑制黑色素瘤细胞的迁移和转移并诱导细胞凋亡 (apoptosis),因此可用于急性髓系白血病 (AML) 和葡萄膜黑色素瘤 (UVM) 的研究。
ANT308 TFA
产品编号: MS-L89036 纯度: 99.57% 分子式: C156H261N47O40S·xC2Hf3O2 分子量: 3467.10 (free base)
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

ANT308 TFA 是一种血管活性肠肽 (VIP receptor) 拮抗剂,可显著增强 T 细胞的活化和增殖,并通过抑制 VIP-VPAC2 信号传导及降低 MCAM 和 N-cadherin 的表达来抑制黑色素瘤细胞的迁移和转移并诱导细胞凋亡 (apoptosis),因此可用于急性髓系白血病 (AML) 和葡萄膜黑色素瘤 (UVM) 的研究。

生物实验数据

生物活性 ANT308 TFA is a vasoactive intestinal peptide (VIP receptor) antagonist that significantly enhances T cell activation and proliferation and, by inhibiting VIP-VPAC2 signaling and downregulating MCAM and N-cadherin expression, suppresses melanoma cell migration and metastasis and induces apoptosis, making it suitable for research on acute myeloid leukemia (AML) and uveal melanoma (UVM).
体外研究
(In Vitro)

ANT308 (0.1-10 μM, 72 h) TFA 剂量依赖性地降低 B16F10 和 HT-144 细胞的活力。
ANT308 (0 μM, 72 h) TFA 降低 S 期细胞比例,并诱导 B16LS9 和 Mel 290 细胞凋亡。
ANT308 (10 μM, 72 h) TFA 显著抑制 B16LS9、Mel290 和 HT-144 细胞系中的细胞迁移。
ANT308 (72 h) TFA 通过抑制 VIP-VPAC2 信号传导来降低 MCAM 和 N-钙粘蛋白的表达。

Cell Viability Assay

Cell Line: B16F10 and HT-144 cells
Concentration: 0.1, 1, 5 and 10 μM
Incubation Time: 72 h
Result: Decreased the numbers of viable B16F10 and HT-144 cells by around 46% and 27%, respectively, compared to control cultures with 5 μM twice daily.

Cell Cycle Analysis

Cell Line: B16LS9 and Mel 290 cells
Concentration: 10 μM
Incubation Time: 72 h
Result: Decreased cells in the S phase.

Apoptosis Analysis

Cell Line: B16LS9 and Mel 290 cells
Concentration: 10 μM
Incubation Time: 72 h
Result: Increased percentages of apoptotic cells.

Cell Migration Assay

Cell Line: B16LS9, B16F10, Mel 290 cells, HT-144 cells
Concentration: 10 μM
Incubation Time: 8 h
Result: Significantly inhibited cell migration in the B16LS9, Mel290, and HT-144 cell lines.
体内研究
(In Vivo)

ANT308 (100 μg/100 μL PBS,皮下注射,每天两次,持续 10 天) TFA 可减少小鼠眼内或皮下黑色素瘤注射后肝转移瘤的数量和大小,并显示出减少原发性肿瘤部位肿瘤体积的趋势。

Animal Model: B16LS9 induced UVM model and B16LS9 or B16LS9 induced subcutaneous melanoma model established in female C57BL6/J mice (8-10 weeks) and NRG (NOD Rag gamma) mice (10-11 months old)
Dosage: 100 μg/100 μL PBS
Administration: Subcutaneous injection (s.c.), twice a day for 10 days
Result: Significantly reduced the number of liver metastases.
Reduced MCAM, but had no significant effect on N-cadherin expression.
had no significant effect on subcutaneous tumor volume.
性状 固体
颜色 White to off-white

化学信息

分子量 3467.10 (free base)
分子式 C156H261N47O40S·xC2Hf3O2

储存&溶解度

储存方式

Sealed storage, away from moisture

Powder -80°C 2 years
-20°C 1 year

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础