PB1 是一种有效的细胞内二硫化物还原剂,具有良好的细胞渗透性、形成高细胞内浓度梯度的能力和稳定性,是一种 borane-protected TCEP (tris(2-carboxyethyl)phosphine) 类似物,在纳摩尔和皮摩尔浓度下可增加体外轴突切开术后视网膜神经节细胞的存活,可用于神经保护的研究。
产品编号: MS-L52496 纯度: 99.47% CAS No.: 188714-28-5 分子式: C14H22BO4P 分子量: 296.11
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

PB1 是一种有效的细胞内二硫化物还原剂,具有良好的细胞渗透性、形成高细胞内浓度梯度的能力和稳定性,是一种 borane-protected TCEP (tris(2-carboxyethyl)phosphine) 类似物,在纳摩尔和皮摩尔浓度下可增加体外轴突切开术后视网膜神经节细胞的存活,可用于神经保护的研究。

生物实验数据

生物活性 PB1 is a potent intracellular disulfide reducing agent with good cell permeability, the ability to form a high intracellular concentration gradient, and stability; it is a borane-protected TCEP (tris(2-carboxyethyl)phosphine) analog that increases the survival of retinal ganglion cells after axotomy in vitro at nanomolar and picomolar concentrations and can be used for neuroprotection research.
IC50 & Target

TCEP

体外研究
(In Vitro)

PB1 produces a robust activation of the BDNF effector ERK1/2. PB1 promotes RGC survival.

体内研究
(In Vivo)

PB1 (150 μM; intraocular injection; 1 week) attenuates the loss of both RGC (retinal ganglion cells) soma and axons in experimental glaucoma.
PB1 protects RGC soma in experimental glaucoma. PB1 single dose limits the biological activity in vivo. PB1 attenuates the loss of both RGC soma and axons in experimental glaucoma. PB1 (0.001~100 μM; 72 hours) is effective at rescuing acutely axotomized retinal ganglion cells.

Animal Model: Sprague-Dawley rats (180~200 g)
Dosage: 150 μM
Administration: Intraocular injection
Result: PB1-treated eyes, 66% of RGCs survived at 1 week after axotomy.
性状 液体
颜色 Colorless to light yellow

化学信息

分子量 296.11
分子式 C14H22BO4P
CAS No. 188714-28-5

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween-80+45% Saline: 3.3 mg/mL (11.14 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, stored under nitrogen

*In solvent: -80°C, 6 months; -20°C, 1 month (stored under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (337.71 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.3771 mL16.8856 mL33.7712 mL84.4281 mL
5 mM0.6754 mL3.3771 mL6.7542 mL16.8856 mL
10 mM0.3377 mL1.6886 mL3.3771 mL8.4428 mL
15 mM0.2251 mL1.1257 mL2.2514 mL5.6285 mL
20 mM0.1689 mL0.8443 mL1.6886 mL4.2214 mL
25 mM0.1351 mL0.6754 mL1.3508 mL3.3771 mL
30 mM0.1126 mL0.5629 mL1.1257 mL2.8143 mL
40 mM0.0844 mL0.4221 mL0.8443 mL2.1107 mL
50 mM0.0675 mL0.3377 mL0.6754 mL1.6886 mL
60 mM0.0563 mL0.2814 mL0.5629 mL1.4071 mL
80 mM0.0422 mL0.2111 mL0.4221 mL1.0554 mL
100 mM0.0338 mL0.1689 mL0.3377 mL0.8443 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (stored under nitrogen)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础