JAK3-IN-6 是一种针对 JAK3 的有效、选择性、不可逆抑制剂,其 IC50 值为 0.15 nM。
产品编号: MS-L48150 纯度: 99.48% CAS No.: 1443235-95-7 分子式: C19H18N4O3 分子量: 350.37
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

JAK3-IN-6 是一种针对 JAK3 的有效、选择性、不可逆抑制剂,其 IC50 值为 0.15 nM。

生物实验数据

生物活性 JAK3-IN-6 is a potent, selective, and irreversible inhibitor of JAK3 with an IC50 value of 0.15 nM.
IC50 & Target JAK3:0.15 nM
体外研究
(In Vitro)

JAK3-IN-6 (compound 2), a potent inhibitor of JAK3 (0.15 nM) is 4300-fold selective for JAK3 over JAK1 in enzyme assays, 67-fold (IL-2 vs. IL-6) or 140-fold (IL-2 vs. EPO or GMCSF) selective in cellular reporter assays and >35-fold selective in human PBMC assays (IL-7 vs. IL-6 or GMCSF). Irreversible JAK3-IN-6 with a JAK1 selective inhibitor 3 (JAK1: 0.96 nM, JAK2: 14 nM, JAK3: >1500 nM, TYK2: 10 nM) are cross titrated to determine if there is an additive or synergistic effect of co-inhibiting JAK1 and JAK3 enzymes on IL-7 signaling in CD3+, CD4+ PBMCs. As shown, the predicted levels of pSTAT5 inhibition based on addition of JAK1 and JAK3 inhibition are very close to the measured effects of cross titrating each compound, demonstrating that there is an additive effect but no synergistic effect of inhibiting JAK1 and JAK3 on blocking STAT5 phosphorylation. Furthermore inhibition of either JAK1 or JAK3 alone is sufficient to fully inhibit pSTAT5.

性状 固体
颜色 White to light yellow

化学信息

分子量 350.37
分子式 C19H18N4O3
CAS No. 1443235-95-7

储存&溶解度

体内实验配方
10% DMSO+90% Saline: < 10 mg/mL (28.54 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 10 mg/mL (28.54 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (285.41 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.8541 mL14.2706 mL28.5413 mL71.3531 mL
5 mM0.5708 mL2.8541 mL5.7083 mL14.2706 mL
10 mM0.2854 mL1.4271 mL2.8541 mL7.1353 mL
15 mM0.1903 mL0.9514 mL1.9028 mL4.7569 mL
20 mM0.1427 mL0.7135 mL1.4271 mL3.5677 mL
25 mM0.1142 mL0.5708 mL1.1417 mL2.8541 mL
30 mM0.0951 mL0.4757 mL0.9514 mL2.3784 mL
40 mM0.0714 mL0.3568 mL0.7135 mL1.7838 mL
50 mM0.0571 mL0.2854 mL0.5708 mL1.4271 mL
60 mM0.0476 mL0.2378 mL0.4757 mL1.1892 mL
80 mM0.0357 mL0.1784 mL0.3568 mL0.8919 mL
100 mM0.0285 mL0.1427 mL0.2854 mL0.7135 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础