JAK2-IN-14 是一种口服有效的 JAK2 抑制剂,IC50 为 2 nM,对 JAK1、JAK3 和 TYK2 的选择性分别是 JAK2 的 89.5 倍、80.5 倍和 51 倍,可通过抑制 STAT5 信号通路导致肿瘤细胞周期停滞和凋亡 (apoptosis),可用于骨髓增生性肿瘤 (MPN) 的研究。
产品编号: MS-L43710 CAS No.: 3087335-24-5 分子式: C26H33N7O 分子量: 459.59
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

JAK2-IN-14 是一种口服有效的 JAK2 抑制剂,IC50 为 2 nM,对 JAK1、JAK3 和 TYK2 的选择性分别是 JAK2 的 89.5 倍、80.5 倍和 51 倍,可通过抑制 STAT5 信号通路导致肿瘤细胞周期停滞和凋亡 (apoptosis),可用于骨髓增生性肿瘤 (MPN) 的研究。

生物实验数据

生物活性 JAK2-IN-14 is an orally active JAK2 inhibitor with an IC50 of 2 nM that exhibits 89.5-fold, 80.5-fold, and 51-fold selectivity for JAK2 over JAK1, JAK3, and TYK2, respectively, inhibits the STAT5 signaling pathway, induces tumor cell cycle arrest and apoptosis, and can be used for research on myeloproliferative neoplasms (MPN).
IC50 & Target JAK2:2 nM
体外研究
(In Vitro)

JAK2-IN-14 (Compound 15au) (0.01-5 μM, 24 h) 在 BaF3-JAK2V617F 和 HEL 细胞中以剂量依赖性方式显著诱导细胞周期停滞于 G2/M 期并诱导细胞凋亡。
JAK2-IN-14 (0.05-1 μM, 2 h) 可在 BaF3-JAK2V617F 和 HEL 细胞中有效抑制 JAK2 及其下游信号分子 STAT5 的磷酸化。

Cell Cycle Analysis

Cell Line: BaF3-JAK2V617F and HEL cells
Concentration: 10, 50, 100, 500 and 1000 nM
Incubation Time: 24 h
Result: Blocked the progression of tumor cells at the G2/M phase, leading to a decrease in the proportions of cells in the G1/G0 and G2 phases.

Western Blot Analysis

Cell Line: BaF3-JAK2V617F and HEL cells
Concentration: 10, 50, 100, 500 and 1000 nM
Incubation Time: 2 h
Result: Reduced p-JAK2 and p-STAT5 levels concentration-dependently.
体内研究
(In Vivo)

JAK2-IN-14 (Compound 15au) (7.5-40 mg/kg, p.o., 每日一次共 13-28 天) 显著抑制 BaF3-JAK2V617F 和 HEL 细胞异种移植小鼠模型中的肿瘤生长。

Animal Model: BaF3-JAK2V617F allogeneic transplantation model established in BALB/c-nude mice
Dosage: 7.5, 15 and 30 mg/kg
Administration: Oral administration (p.o.), once daily for 13 days
Result: Demonstrated significant therapeutic efficacy, reducing spleen weight by 24.1%, 26.4%, and 40.5% at doses of 7.5, 15, and 30 mg/kg, respectively
Animal Model: HEL cells xenograft model was established in 6-week-old male BALB/c nude mice
Dosage: 20 and 40 mg/kg
Administration: Oral administration (p.o.), once daily for 28 days
Result: Significantly inhibited subcutaneous tumor growth.
did not induce observable body weight loss during the experimental period.

化学信息

分子量 459.59
分子式 C26H33N7O
CAS No. 3087335-24-5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础