4,5-Dehydro-6-oxoallosecurinine

4,5-Dehydro-6-oxoallosecurinine 是一种 Keap1-Nrf2 通路激活剂,可促进 Keap1-Nrf2 的核转位并诱导抗氧化和细胞保护基因的表达,同时减少 NO 的生成并降低 LPS 刺激的小胶质细胞中 iNOS、TNF-α、IL-6、IL-1β 的水平,可用于神经退行性疾病的研究。
4,5-Dehydro-6-oxoallosecurinine
产品编号: MS-L36614 分子式: C13H11NO3 分子量: 229.23
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

4,5-Dehydro-6-oxoallosecurinine 是一种 Keap1-Nrf2 通路激活剂,可促进 Keap1-Nrf2 的核转位并诱导抗氧化和细胞保护基因的表达,同时减少 NO 的生成并降低 LPS 刺激的小胶质细胞中 iNOS、TNF-α、IL-6、IL-1β 的水平,可用于神经退行性疾病的研究。

生物实验数据

生物活性 4,5-Dehydro-6-oxoallosecurinine is a Keap1-Nrf2 pathway activator that promotes the nuclear translocation of Keap1-Nrf2 and induces the expression of antioxidant and cytoprotective genes, while reducing NO production and decreasing the levels of iNOS, TNF-α, IL-6, and IL-1β in LPS-stimulated microglia, and can be used for research on neurodegenerative diseases.
体外研究
(In Vitro)

4,5-Dehydro-6-oxoallosecurinine (Compound 7) (0.01-10 μM; 6 h) 可在基因工程化 U2OS 细胞中强效激活 Keap1-Nrf2 的核转位,其 EC50 为 697.8 nM。
4,5-Dehydro-6-oxoallosecurinine (0.01-1 μM; 3 h) 诱导 BV-2 细胞中 Nrf2 发生浓度依赖性的核转位及全细胞累积。
4,5-Dehydro-6-oxoallosecurinine (0.1-1 μM; 6 h) 诱导 BV-2 细胞中 Nrf2 依赖抗氧化和细胞保护性基因上调。
4,5-Dehydro-6-oxoallosecurinine (0.01-1 μM; 12 h) 在 BV-2 细胞中可诱导 Nrf2 依赖性抗氧化蛋白 HO-1 和 GCLM 表达上调。
4,5-Dehydro-6-oxoallosecurinine (预处理 6 h 后再经 LPS 刺激 24 h,0.03-1 μM) 可抑制 LPS (MS-X54539) 激活的 BV-2 小胶质细胞中一氧化氮的生成。
4,5-Dehydro-6-oxoallosecurinine (0.03-1 μM; 6 h pre-incubation, followed by LPS stimulation) 可浓度依赖性地抑制 LPS 诱导的 BV-2 小胶质细胞中 iNOS mRNA 和蛋白表达。
4,5-Dehydro-6-oxoallosecurinine (提前孵育 6 h,随后给予 LPS 刺激) 可浓度依赖性地抑制 LPS 诱导 BV-2 小胶质细胞中促炎细胞因子 (TNF-α、IL-6、IL-1β) 的 mRNA 和蛋白表达。

Western Blot Analysis

Cell Line: BV-2 microglial cells
Concentration: 0.01, 0.03, 0.1, 0.3, 1, 3, and 10 μM
Incubation Time: 3 h
Result: Induced concentration-dependent accumulation of Nrf2 protein in nuclear fractions, with significant increases (relative to vehicle control) observed at 0.3 μM and 1 μM (8- and 4-fold increases, respectively).
Induced concentration-dependent accumulation of Nrf2 protein in whole-cell lysates, with significant increases at 0.1, 0.3, and 1 μM (2-, 3-, and 8-fold increases, respectively).

Real Time qPCR

Cell Line: BV-2 microglial cells
Concentration: 0.1, 0.3, 1 μM
Incubation Time: 6 h
Result: Induced concentration-dependent upregulation of all tested Nrf2 target genes: Hmox1 (1.5-, 2.5-, 6-fold increases, respectively), Gclm (1.2-, 2-, 3.2-fold increases, respectively), Gclc (1.1-, 1.5-, 1.8-fold increases, respectively), Nqo1 (1.5-, 2.5-, 5.5-fold increases, respectively), Osgin1 (1.1-, 1.5-, 2.2-fold increases, respectively), Srxn1 (1.2-, 2-, 3.5-fold increases, respectively), Slc7a11 (1.5-, 3.5-, 7-fold increases, respectively), and Txnrd1 (0.8-, 1.3-, 2.5-fold increases, respectively).
Showed statistically significant increases from 0.1 or 0.3 μM relative to vehicle control.

Western Blot Analysis

Cell Line: BV-2 microglial cells
Concentration: 0.01, 0.03, 0.1, 0.3, 1, 3, and 10 μM
Incubation Time: 12 h
Result: Induced concentration-dependent increases in HO-1 and GCLM protein levels.
Increased HO-1 protein levels significantly at 0.3 μM and 1 μM (3- and 5-fold increases, respectively, relative to vehicle control).
Increased GCLM protein levels significantly at 0.3 μM and 1 μM (3.5- and 8.5-fold increases, respectively, relative to vehicle control).

化学信息

分子量 229.23
分子式 C13H11NO3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础