MIP-1072 是一种竞争性前列腺特异性膜抗原 (PSMA) 抑制剂,Ki 值为 4.6 nM,可特异性结合 PSMA 并内化至表达 PSMA 的前列腺癌细胞中,在表达 PSMA 的前列腺癌异种移植瘤中蓄积,并特异性阻断 PSMA 阳性前列腺癌异种移植物对 68Ga-NOTA-GUL 的摄取;当用 123I 进行放射性标记时,MIP-1072 可作为 SPECT/CT 分子显像剂发挥作用,可用于前列腺癌相关研究。
产品编号: MS-L24645 CAS No.: 949575-20-6 分子式: C19H26In3O7 分子量: 535.33
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

MIP-1072 是一种竞争性前列腺特异性膜抗原 (PSMA) 抑制剂,Ki 值为 4.6 nM,可特异性结合 PSMA 并内化至表达 PSMA 的前列腺癌细胞中,在表达 PSMA 的前列腺癌异种移植瘤中蓄积,并特异性阻断 PSMA 阳性前列腺癌异种移植物对 68Ga-NOTA-GUL 的摄取;当用 123I 进行放射性标记时,MIP-1072 可作为 SPECT/CT 分子显像剂发挥作用,可用于前列腺癌相关研究。

生物实验数据

生物活性 MIP-1072 is a competitive prostate-specific membrane antigen (PSMA) inhibitor with a Ki of 4.6 nM that specifically binds PSMA and internalizes into PSMA-expressing prostate cancer cells, accumulates in PSMA-expressing prostate cancer xenografts, and specifically blocks the uptake of 68Ga-NOTA-GUL by PSMA-positive prostate cancer xenografts; when radiolabeled with 123I, MIP-1072 functions as a SPECT/CT molecular imaging agent and can be used for prostate cancer-related research.
体外研究
(In Vitro)

MIP-1072 (1-10000 nM; 30 min) 可强效抑制前列腺癌 LNCaP 细胞裂解物中 PSMA 的 NAALAD 酶活性,其 Ki 值为 4.6 nM。
[123I]MIP-1072 (3 nM; 1 h) 可特异性结合 PSMA 阳性前列腺癌 LNCaP 细胞,但不结合 PSMA 阴性前列腺癌 PC3 细胞;其结合作用可被非放射性标记的 MIP-1072 (10 µM; 1 h) 抑制。
[123I]MIP-1072 (100 nM; 0-2 h) 会在 37 °C 条件下以温度依赖、时间依赖的方式内化进入前列腺癌 LNCaP 细胞。

体内研究
(In Vivo)

[123I]MIP-1072 (每只小鼠 1 mCi;静脉注射;单剂量) 可通过 SPECT/CT 成像实现对表达 PSMA 的前列腺癌异种移植物的特异性体内可视化。
123I-MIP-1072 (每只小鼠 ~74 kBq;静脉注射;单次推注) 的肿瘤摄取量与肿瘤质量直接成正比 (整体 R2 = 0.7605;联合处理组 R2 = 0.7066),可在荷 LNCaP 异种移植瘤小鼠中追踪 Paclitaxel (HY-B0015) 处理应答下的肿瘤大小变化。
MIP-1072 (50 mg/kg;与 68Ga-NOTA-GUL 单次共注射) 可特异性阻断 BALB/c 裸鼠中 PSMA 阳性前列腺癌异种移植物对 68Ga-NOTA-GUL 的摄取,将肿瘤 SUVmean 降至 0.098。

Animal Model: Fox Chase SCID (male, xenograft model via implantation of LNCaP, PC-3 PIP, or PC-3 flu cells, used when tumors reached 5-7 mm in diameter)
Dosage: 1 mCi/mouse
Administration: i.v.; single dose
Result: Showed high, selective uptake in PSMA-expressing LNCaP tumors and kidneys at 4 hours post-injection via SPECT/CT imaging.
Detected PSMA-positive PC-3 PIP tumors but showed no uptake in PSMA-negative PC-3 flu tumors at 2 hours post-injection via SPECT/CT imaging.
Animal Model: NCr-nu/nu (male, athymic, LNCaP human prostate cancer xenograft)
Dosage: ~74 kBq/mouse
Administration: i.v.; single bolus injection
Result: Showed an overall linear correlation with tumor mass (R2 = 0.7605).
Increased from 2.17 %ID on day 2 to 3.93 %ID on day 23 in vehicle-treated mice, corresponding to increased tumor growth (mean tumor mass increased from 222 mg to 415 mg).
Reached 2.34 %ID on day 23 in paclitaxel-treated mice, not significantly different from day 2 vehicle-treated mice, consistent with inhibited tumor growth (mean tumor mass 161 mg).
Reached 10.0 %ID/g (day 2 vehicle), 9.8 %ID/g (day 23 vehicle), and 13.3 %ID/g (day 23 paclitaxel).
Showed a linear correlation with tumor mass in combined treatment groups (R2 = 0.7066).
Animal Model: BALB/c nude (male, 4 weeks old, specific pathogen-free)
Dosage: 50 mg/kg
Administration: single co-injection with 68Ga-NOTA-GUL
Result: Reduced tumor SUVmean from 1.056 to 0.098.
Partially blocked kidney uptake of 68Ga-NOTA-GUL.

化学信息

分子量 535.33
分子式 C19H26In3O7
CAS No. 949575-20-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础