G9a-IN-4 是一种 G9a 特异性抑制剂(IC50 = 32 nM),对其他测试的赖氨酸/精氨酸甲基转移酶表现出高选择性,具有较高的酶活性,并对所有测试的癌细胞均表现出更强的抗增殖作用,可显著抑制 H3K9me2 水平,通过诱导 ROS 产生触发自噬(autophagy),从而导致 CT26 结肠癌细胞凋亡(apoptosis)和 G0/G1 期细胞周期阻滞,可用于结肠癌的研究。
G9a-IN-4
产品编号: MS-L17057 分子式: C35H48N6O4 分子量: 616.79
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

G9a-IN-4 是一种 G9a 特异性抑制剂(IC50 = 32 nM),对其他测试的赖氨酸/精氨酸甲基转移酶表现出高选择性,具有较高的酶活性,并对所有测试的癌细胞均表现出更强的抗增殖作用,可显著抑制 H3K9me2 水平,通过诱导 ROS 产生触发自噬(autophagy),从而导致 CT26 结肠癌细胞凋亡(apoptosis)和 G0/G1 期细胞周期阻滞,可用于结肠癌的研究。

生物实验数据

生物活性 G9a-IN-4 is a specific G9a inhibitor (IC50 = 32 nM) that exhibits high selectivity over other tested lysine/arginine methyltransferases, shows high enzymatic activity, and displays stronger antiproliferative effects against all tested cancer cells; it significantly inhibits H3K9me2 levels and triggers autophagy by inducing ROS production, thereby leading to apoptosis and G0/G1 cell cycle arrest in CT26 colon cancer cells, and can be used for the study of colon cancer.
体外研究
(In Vitro)

G9a-IN-4 (Compound 31) 是一种特异性 G9a/GLP 抑制剂 (IC50 = 0.2 nM;IC50 = 0.43 nM),对 AlphaLISA 中测试的其他表观遗传靶点也具有高选择性。
G9a-IN-4 对所有测试的癌细胞均表现出更强的抑制作用,包括血液肿瘤细胞:RPMI8226 (IC50 = 0.85 μM) 、MV-4-11 (IC50 = 0.49 μM) 、Jeko-1 (IC50 = 0.7 μM) 、Molt4 (IC50 = 1.34 μM),以及实体瘤细胞:HeLa (IC50 = 1.55 μM) 、U2OS (IC50 = 3 μM) 、CT26 (IC50 = 3.31 μM)。
G9a-IN-4 (1.25-2.5 μM,72 h) 以剂量依赖的方式显著降低 CT26 细胞中 H3K9 的二甲基化水平。
G9a-IN-4 (2.5-5 μM,48 h) 以剂量依赖的方式显著诱导 CT26 细胞中活性氧 (ROS) 的积累。
G9a-IN-4 (2.5-10 μM,12 h) 在 10 μM 浓度下显著降低 LC3-I 的表达,并在所有测试浓度下均显著提高 LC3-II 的水平,从而以剂量依赖的方式增加 LC3-II 与 LC3-I 的比值,有效诱导 CT26 细胞的自噬。
G9a-IN-4 (2.5-10 μM,24 小时) 可剂量依赖性地将诱导 CT26 细胞凋亡比例从 5.48 % 提高至 91.37 %。
G9a-IN-4 (2.5-5 μM,24 小时) 可诱导 CT26 细胞发生 G0/G1 期阻滞。

Western Blot Analysis

Cell Line: CT26 cells
Concentration: 1.25 μM, 2.5 μM
Incubation Time: 72 h
Result: Induced a marked reduction in the dimethylation of H3K9 in CT26 cells in a dose-dependent manner.

Cell Autophagy Assay

Cell Line: CT26 cells
Concentration: 2.5 μM, 5 μM, 10 μM
Incubation Time: 72 h
Result: Significantly decreased LC3-I expression at 10 μM and increased the LC3-II level at all tested concentrations, thus leading to an increased ratio of LC3-II to LC3-I in a dose-dependent manner.
Effectively induced autophagy in CT26 cells.

Cell Cycle Analysis

Cell Line: CT26 cells
Concentration: 2.5 μM, 5 μM
Incubation Time: 24 h
Result: Induced a marked reduction in the dimethylation of H3K9 in CT26 cells in a dose-dependent manner.
体内研究
(In Vivo)

G9a-IN-4 (10 mg/kg,腹腔注射,每两天一次,持续两周) 能有效抑制结肠癌小鼠模型中的肿瘤,而不会造成明显的体重减轻或死亡。

Animal Model: CT26 cells (5 × 105 cells/mouse) were subcutaneously implanted into the right armpit of female BALB/c mice (6 weeks).
Dosage: 10 mg/kg
Administration: I.p., once every two days for two weeks
Result: Significantly suppressed tumor growth with a 45.1 % (TGI) reduction in tumor weight.
Exhibited a negligible impact on the body weight of mice without mortality during the 14-day treatment.

化学信息

分子量 616.79
分子式 C35H48N6O4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础