A40926

Synonyms: 达巴万星杂质5
A40926 是一种靶向细菌细胞壁肽聚糖前体 D-丙氨酰-D-丙氨酸 (D-Ala-D-Ala) 的糖肽类抗生素,通过竞争性结合该靶点不可逆抑制细胞壁合成,阻断肽聚糖交联并破坏细胞壁完整性,导致细菌裂解死亡,对革兰氏阳性菌 (如葡萄球菌、链球菌) 及淋病奈瑟菌具高效杀菌活性,MIC=0.06-2 μg/mL,对青霉素耐药菌株亦有效,且兼具脂溶性脂肪酸结构,可提升血清浓度并延长作用时间 (如大鼠体内终端半衰期达 61.22 h)。
产品编号: MS-L15660 纯度: 92.38% CAS No.: 102961-72-8 分子式: C83H88Cl2N8O29 分子量: 1732.53
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

A40926 是一种靶向细菌细胞壁肽聚糖前体 D-丙氨酰-D-丙氨酸 (D-Ala-D-Ala) 的糖肽类抗生素,通过竞争性结合该靶点不可逆抑制细胞壁合成,阻断肽聚糖交联并破坏细胞壁完整性,导致细菌裂解死亡,对革兰氏阳性菌 (如葡萄球菌、链球菌) 及淋病奈瑟菌具高效杀菌活性,MIC=0.06-2 μg/mL,对青霉素耐药菌株亦有效,且兼具脂溶性脂肪酸结构,可提升血清浓度并延长作用时间 (如大鼠体内终端半衰期达 61.22 h)。

生物实验数据

生物活性 A40926 is a glycopeptide antibiotic that targets the bacterial cell wall peptidoglycan precursor D-alanyl-D-alanine (D-Ala-D-Ala), irreversibly inhibiting cell wall synthesis through competitive binding to this target, blocking peptidoglycan cross-linking and disrupting cell wall integrity to cause bacterial lysis and death; it exhibits potent bactericidal activity against Gram-positive bacteria (such as Staphylococcus and Streptococcus) and Neisseria gonorrhoeae with MIC=0.06-2 μg/mL, is also effective against penicillin-resistant strains, and possesses a lipophilic fatty acid structure that can increase serum concentration and prolong duration of action (e.g., a terminal half-life of 61.22 h in rats).
IC50 & Target

Glycopeptide

 

体外研究
(In Vitro)

A40926 对革兰氏阳性菌 (如金黄色葡萄球菌、链球菌) 及淋病奈瑟菌表现出强效抑制活性,MIC=0.004-32 μg/mL,其中对淋病奈瑟菌临床分离株的 MIC 中位数为 1 μg/mL,显著低于 Teicoplanin (MS-G93050) 和 Vancomycin (MS-W88465)。
A40926 (4-16 μg/mL;5 h) 在 4-8 倍 MIC 浓度下,5 h 内可杀灭 99.9%-99.99% 的临床分离株,包括青霉素耐药和 Spectinomycin (MS-M13551) 耐药菌株,表现出快速杀菌活性。

Cell Viability Assay

Cell Line: Neisseria gonorrhoeae, Streptococcus pyogenes, Streptococcus faecalis, Staphylococcus aureus, Staphylococcus epidermidis
Concentration: MIC
Incubation Time:
Result: Exhibited antibacterial activity with MIC values of 2 μg/mL (Neisseria gonorrhoeae), 0.06 μg/mL (Streptococcus pyogenes), 0.06 μg/mL (Streptococcus faecalis), 0.06 μg/mL (Staphylococcus aureus), 0.06 μg/mL (Staphylococcus epidermidis), respectively.
体内研究
(In Vivo)

A40926 (10 mg/kg;皮下注射;单剂量) 改善 CD-1小鼠的败血症模型,减轻小鼠受到的金黄色葡萄球菌、化脓性链球菌和肺炎链球菌感染,效果略低于 Teicoplanin (MS-G93050) (ED50分别为 1.9、0.33、0.38 mg/kg),但血清中的浓度比 Teicoplanin 显著更高且持续时间更长。
A40926 (10 mg/kg;静脉注射/皮下注射;单剂量) 在雄性 CD 大鼠的药代动力学模型中,静脉注射后血浆浓度呈幂函数衰减,终端半衰期=61.22 h,皮下注射生物利用度近 90%,120 h 时的尿排泄率 35.9%。

Animal Model: CD-1 mice (male and female, 18-22 g) infected with Staphylococcus aureus, Streptococcus pyogenes, or Streptococcus pneumoniae
Dosage: 10 mg/kg (dissolved in 10% DMSO, 40% PEG 300, 5% Tween-80, and 45% saline)
Administration: Subcutaneous injection, single dose
Result: Demonstrated protective efficacy against systemic infections caused by gram-positive pathogens, with ED50 values of 1.9 mg/kg for S. aureus, 0.33 mg/kg for S. pyogenes, and 0.38 mg/kg for S. pneumoniae.
Although slightly less effective than Teicoplanin (MS-G93050) in survival rates, achieved peak serum concentrations of 128 μg/mL and maintained effective levels (>1 μg/mL) for over 72 h, indicating prolonged exposure compared to Teicoplanin (MS-G93050).
Animal Model: Male CD rats (161-185 g) for pharmacokinetic analysis
Dosage: 10 mg/kg (formulated in 10% DMSO and 90% corn oil for s.c.)
Administration: Intravenous or subcutaneous injection, single dose, 1 cycle.
Result: Displayed a tri-exponential plasma concentration profile with a terminal half-life of 61.22 h, mean residence time of 84.5 h, and total clearance of 0.11 L/h/kg.
Subcutaneous injection resulted in rapid absorption (Tmax=2 h) and high bioavailability (~90%).
Urinary excretion accounted for 35.9% of the administered dose within 120 h, primarily as unchanged drug, while fecal excretion was minimal (<5%).
性状 固体
颜色 White to off-white

化学信息

分子量 1732.53
分子式 C83H88Cl2N8O29
CAS No. 102961-72-8
别名 达巴万星杂质5

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 5.88 mg/mL (3.39 mM; ultrasonic and warming and heat to 20°C; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM0.5772 mL2.8860 mL5.7719 mL14.4298 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础