Polyinosinic-polycytidylic acid potassium

Synonyms: Poly(I:C) potassium
Polyinosinic-polycytidylic acid potassium (Poly(I:C) potassium) 是双链 RNA 的合成类似物,作为 TLR3 以及视黄酸诱导型基因 I 受体(RIG-I 和 MDA5)的激动剂,既可用作疫苗佐剂以增强先天性和适应性免疫反应并改变肿瘤微环境,也可直接触发癌细胞凋亡 (Apoptosis)。
产品编号: MS-L04880 CAS No.: 31852-29-6 分子式: (C10H13N4O8P)x.(C9H14N3O8P)x.xK
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Polyinosinic-polycytidylic acid potassium (Poly(I:C) potassium) 是双链 RNA 的合成类似物,作为 TLR3 以及视黄酸诱导型基因 I 受体(RIG-I 和 MDA5)的激动剂,既可用作疫苗佐剂以增强先天性和适应性免疫反应并改变肿瘤微环境,也可直接触发癌细胞凋亡 (Apoptosis)。

生物实验数据

生物活性 Polyinosinic-polycytidylic acid potassium (Poly(I:C) potassium) is a synthetic analog of double-stranded RNA that acts as an agonist of TLR3 and retinoic acid-inducible gene I receptors (RIG-I and MDA5), and can serve as a vaccine adjuvant to enhance innate and adaptive immune responses and alter the tumor microenvironment, as well as directly trigger apoptosis in cancer cells.
IC50 & Target

TLR3

 

体外研究
(In Vitro)

Polyinosinic-polycytidylic acid potassium (20 ng/mL; 24 hours; WM793, WM278, WM239A, WM9 and 1205Lu cells) 抑制细胞生长活性.
Polyinosinic-polycytidylic acid potassium (200 ng/mL; 24 hours; 1205Lu cells) 诱导 1205Lu 细胞凋亡。
Polyinosinic-polycytidylic acid potassium (5 ng/mL; 24 hours; 1205Lu cells) 诱导黑素瘤细胞中的 IFN-β 表达。RIG-I 和 MDA-5 的沉默证实 Polyinosinic-polycytidylic acid potassium 诱导 IFN-β 分别需要 RIG-I 和 MDA-5,并且需要 IPS-1。
Polyinosinic-polycytidylic acid potassium 重悬于无菌盐水中,以 2 mg/ml 的浓度加热至 50 °C 以确保完全溶解,然后自然冷却至室温以确保双链 RNA 的适当退火,从而制备用于注射的 Polyinosinic-polycytidylic acid potassium. Poly I:C 储存在 -20 °C 直至使用。

Cell Viability Assay

Cell Line: WM793, WM278, WM239A, WM9 and 1205Lu cells
Concentration: 20 ng/mL
Incubation Time: 24 hours
Result: Strongly reduced viability from 100% in controls to 20%–50% within 24 hours.

Apoptosis Analysis

Cell Line: 1205Lu cells
Concentration: 200 ng/mL
Incubation Time: 24 hours
Result: Induced apoptosis in 1205Lu cells.

RT-PCR

Cell Line: WM793, WM278, WM239A, WM9 and 1205Lu cells
Concentration: 3 ng/mL
Incubation Time: 24 hours
Result: Induced IFN-β expression in melanoma cells.

Western Blot Analysis

Cell Line: 1205Lu cells
Concentration: 5 ng/mL
Incubation Time: 24 hours
Result: Revealed active subunits of caspase-9 and caspase-8 in melanoma cells.
体内研究
(In Vivo)

Polyinosinic-polycytidylic acid potassium (50 µg; i.v.; on days 3, 6, and 9 after tumor inoculation) 在 NOD/SCID 免疫缺陷小鼠中显示出抗肿瘤活性。

Animal Model: NOD/SCID immunodeficient mice (1205Lu cells)
Dosage: 50 µg
Administration: I.v.; on days 3, 6, and 9 after tumor inoculation
Result: Reduced the size of metastases and the total amount of tumor tissue, and the level of human DNA was 50% lower in mice.

化学信息

分子式 (C10H13N4O8P)x.(C9H14N3O8P)x.xK
CAS No. 31852-29-6
别名 Poly(I:C) potassium

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础