TrxR-IN-6 是一种硫氧还蛋白还原酶 (TrxR) 抑制剂,可诱导活性氧 (ROS) 积累并导致细胞凋亡 (apoptosis),还可诱导线粒体功能障碍、内质网应激以及 DNA 损伤,可用于乳腺癌、白血病的研究。
产品编号: MS-L01822 CAS No.: 3032446-53-7 分子式: C11H12AsCl2NOS2 分子量: 384.18
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

TrxR-IN-6 是一种硫氧还蛋白还原酶 (TrxR) 抑制剂,可诱导活性氧 (ROS) 积累并导致细胞凋亡 (apoptosis),还可诱导线粒体功能障碍、内质网应激以及 DNA 损伤,可用于乳腺癌、白血病的研究。

生物实验数据

生物活性 TrxR-IN-6 is a thioredoxin reductase (TrxR) inhibitor that induces reactive oxygen species (ROS) accumulation and leads to apoptosis, and also induces mitochondrial dysfunction, endoplasmic reticulum stress, and DNA damage, making it useful for research on breast cancer and leukemia.
体外研究
(In Vitro)

TrxR-IN-6 (Compound 1d) (24-48 小时) 可强效抑制 4T1、MCF-7、HeLa、Molm-13 和 K562 癌细胞的增殖,其 IC50 值介于 0.45 μM 至 0.74 μM 之间,同时对 COS-7 正常细胞和 PBMC 的毒性较低。
TrxR-IN-6 (0.5-2 μM;12-24 小时) 可在体外以浓度依赖的方式选择性抑制 4T1 和 MCF-7 癌细胞中的 TrxR 活性,而对 COS-7 正常细胞的 TrxR 活性或 4T1 细胞中的 GR/GPx 活性无影响。
TrxR-IN-6 (0.5-2 μM;24 小时) 可降低 4T1 和 MCF-7 癌细胞中 TrxR 系统的 mRNA 和蛋白水平,但对 COS-7 正常细胞无此作用;且其抗增殖和促凋亡作用依赖于 4T1 细胞中 TrxR 的表达。
TrxR-IN-6 (0.5-2 μM;3-24 小时) 可在 4T1 细胞中诱导不可逆的氧化应激。
TrxR-IN-6 (0.5-2 μM;12-24 小时) 可通过上调内质网应激相关蛋白并破坏细胞质钙稳态,在 4T1 细胞中诱导内质网应激和未折叠蛋白反应。
TrxR-IN-6 (0.5-2 μM;12-24 小时) 可通过降低膜电位与 ATP 水平、改变 Bcl-2 家族蛋白表达、激活半胱天冬酶凋亡级联反应、诱导 DNA 片段化及造成线粒体结构损伤,在 4T1 细胞中诱导线粒体功能障碍。
TrxR-IN-6 (1-2 μM;24 小时) 可在体外以浓度依赖的方式诱导 4T1 细胞发生 caspase 依赖性凋亡。

Western Blot Analysis

Cell Line: 4T1
Concentration: 0.5 μM; 1 μM; 2 μM
Incubation Time: 24 h
Result: Upregulated the levels of relevant proteins involved in ER stress, including GRP78, PERK, ATF4, and CHOP.
Strongly upregulated ubiquitinated protein levels.

Western Blot Analysis

Cell Line: 4T1
Concentration: 0.5 μM; 1 μM; 2 μM
Incubation Time: 24 h
Result: Upregulated the expression of Bax, c-casp9, c-casp-3 and c-parp.
Downregulated the expression of Bcl-2.

Apoptosis Analysis

Cell Line: 4T1
Concentration: 0.5 μM; 1 μM; 2 μM
Incubation Time: 24 h
Result: Induced apoptosis in a concentration-dependent manner, with 21.8% early apoptosis and 29.9% late apoptosis/necrosis at 2 μM.
体内研究
(In Vivo)

TrxR-IN-6 (Compound 1d) (1.5 mg/kg;腹腔注射;每周 1 次,共 2 周) 可使携带 4T1 乳腺癌异种移植物的 BALB/c 小鼠肿瘤缩小 90%。

Animal Model: BALB/c (female, 4-week-old, 18-22 g, subcutaneous injection of 2 × 106 4T1 cells)
Dosage: 1.5 mg/kg
Administration: i.p.; once weekly; 2 weeks
Result: Induced 90% tumor shrinkage, resulting in significantly smaller tumor volumes and lower tumor weights compared to control and auranofin-treated groups.
Reduced protein levels of TrxR1, Trx1, TrxR2, and Trx2 in tumor tissue.
Triggered a robust ROS burst in tumors.
Did not cause significant changes in mouse body weight.
Reversed spleen enlargement observed in control tumor-bearing mice.
Protected liver cells from tumor-related damage with no obvious abnormalities in other organs.
Normalized hematological parameters including white blood cells, neutrophils, lymphocytes, and monocytes compared to control tumor-bearing mice.

化学信息

分子量 384.18
分子式 C11H12AsCl2NOS2
CAS No. 3032446-53-7

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础