ATM-IN-2 是一种选择性且口服有效的 ATM 抑制剂,其 IC50 为 4 nM,具有高度的激酶选择性(相对于 PIKK 家族成员的选择性超过 700 倍),通过抑制 ATM 磷酸化和下游信号通路(p53、H2AX)发挥抗肿瘤作用并促进细胞凋亡(apoptosis),可用于实体瘤如结肠癌的研究。
ATM-IN-2
产品编号: MS-K99012 分子式: C25H21N3O3S 分子量: 443.52
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

ATM-IN-2 是一种选择性且口服有效的 ATM 抑制剂,其 IC50 为 4 nM,具有高度的激酶选择性(相对于 PIKK 家族成员的选择性超过 700 倍),通过抑制 ATM 磷酸化和下游信号通路(p53、H2AX)发挥抗肿瘤作用并促进细胞凋亡(apoptosis),可用于实体瘤如结肠癌的研究。

生物实验数据

生物活性 ATM-IN-2 is a selective and orally active ATM inhibitor with an IC50 of 4 nM that exhibits high kinase selectivity (over 700-fold selectivity relative to PIKK family members), exerts antitumor effects and promotes apoptosis by inhibiting ATM phosphorylation and downstream signaling pathways (p53, H2AX), and can be used for the study of solid tumors such as colon cancer.
IC50 & Target

ATM

4 nM (IC50)

体外研究
(In Vitro)

ATM-IN-2 (Compound 25a) (0-10000 nM, 6-7 days) 对 HEL116 和 SW620 细胞显示出良好的抑制活性,IC50 值分别为 58.2 和 66.6 nM,并有效抑制细胞克隆形成能力。
ATM-IN-2 (1-4 μM, 2 days) 通过加剧 G2/M 期停滞、促进细胞凋亡,增强了 Irinotecan (MS-O02109) 的治疗效果,并在 HCT116 细胞中实现了协同的抗增殖作用。
ATM-IN-2 (0.25-2 μM, 4 h) 显著抑制了 HCT116 和 SW620 细胞中的 ATM 信号激活。

Cell Cycle Analysis

Cell Line: HCT116 cells
Concentration: 1, 2, 4 μM co-treated with Irinotecan (MS-I27026)
Incubation Time: 2 days
Result: Alone had no significant effect on the cell cycle.
Increased the G2/M phase population in a concentration-dependent manner accompanied by a reduction in the G0/G1 phase population.

Apoptosis Analysis

Cell Line: HCT116 cells
Concentration: 1, 2, 4 μM co-treated with Irinotecan
Incubation Time: 2 days
Result: Exhibited significantly higher apoptosis rates compared to monotherapy.

Western Blot Analysis

Cell Line: HCT116 and SW620 cells
Concentration: 0.5, 1, 2 μM in HCT116 cells and 0.25, 0.5, 1 μM in SW620 cells
Incubation Time: 4 h
Result: Reduced the phosphorylation levels of ATM-S1981 and p53.
Reduced the accumulation of γH2AX.
体内研究
(In Vivo)

ATM-IN-2 (Compound 25a) (15-30 mg/kg, p.o., 共 14-20 天) 在小鼠异种移植模型的癌症治疗中与 Irinotecan 发挥协同抗肿瘤作用。

Animal Model: Xenograft model induced by HCT116 or SW620 cells established in 6-weeks NOD-SCID mice
Dosage: 30 mg/kg alone and 15 and 30 mg/kg with 2 mg/kg Irinotecan in HCT116 model; 45 mg/kg with 2 mg/kg Irinotecan in SW620 model
Administration: Oral administration (p.o.), for 14 days in HCT116 model and 20 days for SW620 model
Result: Demonstrated superior antitumor at high-dose coadministration with Irinotecan in HCT116 model.
Demonstrated a favorable safety profile with little body weight loss observed in HCT116 model.
Demonstrated a dose-dependent enhancement of inhibitory effects in SW620 model.

化学信息

分子量 443.52
分子式 C25H21N3O3S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础