TD1092 是一种泛凋亡抑制蛋白 (IAP) 降解剂,可降解 cIAP1、cIAP2 和 XIAP,通过促进 IAP 降解激活细胞凋亡蛋白酶 (apoptosis 3/7) 并导致癌细胞凋亡 (apoptosis),同时还能阻断 TNFα 介导的 NF-κB 信号通路并抑制 IKK、IkBα、p65 和 p38 的磷酸化,可作为 PROTAC 用于癌症研究。
产品编号: MS-K66709 纯度: 99.49% CAS No.: 3037417-26-5 分子式: C55H70N8O9 分子量: 987.19
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

TD1092 是一种泛凋亡抑制蛋白 (IAP) 降解剂,可降解 cIAP1、cIAP2 和 XIAP,通过促进 IAP 降解激活细胞凋亡蛋白酶 (apoptosis 3/7) 并导致癌细胞凋亡 (apoptosis),同时还能阻断 TNFα 介导的 NF-κB 信号通路并抑制 IKK、IkBα、p65 和 p38 的磷酸化,可作为 PROTAC 用于癌症研究。

生物实验数据

生物活性 TD1092 is a pan-inhibitor of apoptosis protein (IAP) degrader that degrades cIAP1, cIAP2, and XIAP, activates apoptosis caspases (apoptosis 3/7) and induces cancer cell apoptosis (apoptosis) by promoting IAP degradation, while also blocking TNFα-mediated NF-κB signaling and inhibiting the phosphorylation of IKK, IkBα, p65, and p38, and can serve as a PROTAC for cancer research.
IC50 & Target

cIAP1

 

cIAP2

 

XIAP

 

Caspase 3

 

Caspase-7

 

体外研究
(In Vitro)

TD1092 (0.1 μM-10 μM; 0.5-6 小时) 以剂量和时间依赖的方式有效地降解 cIAP1, cIAP2 和 XIAP。
TD1092 (0.01, 0.1 和 1 μM;18 小时) 能够激活 MCF-7 细胞中的半胱天冬酶 3 和 7。
TD1092 (1 μM; 48 或 72 小时) 促进癌细胞死亡。
TD1092 (0.1 μM; 24 小时) 抑制受 TNFα 诱导的三阴性乳腺癌细胞的迁徙和入侵。
TD1092 (1 μM; 6 小时) 抑制 TNFα 诱导的 NF-κB 信号通路和上皮-间充质转化 (EMT)。
TD1092 (1 μM; 72 小时) 抑制 MCF-7 细胞生长,IG50 为 0.395 μM。

Western Blot Analysis

Cell Line: MCF-7 cells
Concentration: (1) 0, 0.1, 1, 10 μM or 0.1 μM
(2) 0.1 μM, with or without 100 ng/mL TNFα
Incubation Time: 18 hours or 0.5, 1, 2, 4, 6 hours for (1) and 4 hours for (2)
Result: Dose- and time-dependently decreases the protein level of cIAP1, cIAP2, and XIAP.
Inhibited the phosphorylation of IKK, IkBα, p65, and p38 mediated by TNFα.
Counterbalanced the effect of TNFα on the levels of E-cadherin (CDH1; an epithelial marker) and vimentin (VIM; a mesenchymal marker).

Cell Migration Assay

Cell Line: MDA-MB-231 and MDA-MB-157 cells
Concentration: 0.1 μM; with or without 100 ng/mL TNFα
Incubation Time: 24 hours
Result: Inhibited TNFα-induced (100 ng/mL) migration and invasion against two triple-negative breast cancer (TNBC; MDA-MB-231 and MDA-MB-157) cell lines.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 987.19
分子式 C55H70N8O9
CAS No. 3037417-26-5

储存&溶解度

储存方式

4°C, protect from light

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 100 mg/mL (101.30 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.0130 mL5.0649 mL10.1298 mL25.3244 mL
5 mM0.2026 mL1.0130 mL2.0260 mL5.0649 mL
10 mM0.1013 mL0.5065 mL1.0130 mL2.5324 mL
15 mM0.0675 mL0.3377 mL0.6753 mL1.6883 mL
20 mM0.0506 mL0.2532 mL0.5065 mL1.2662 mL
25 mM0.0405 mL0.2026 mL0.4052 mL1.0130 mL
30 mM0.0338 mL0.1688 mL0.3377 mL0.8441 mL
40 mM0.0253 mL0.1266 mL0.2532 mL0.6331 mL
50 mM0.0203 mL0.1013 mL0.2026 mL0.5065 mL
60 mM0.0169 mL0.0844 mL0.1688 mL0.4221 mL
80 mM0.0127 mL0.0633 mL0.1266 mL0.3166 mL
100 mM0.0101 mL0.0506 mL0.1013 mL0.2532 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础