PVD-06 是一种选择性 PROTAC PTPN2 降解剂,其 DC50 值为 217 nM(对 PTP1B 的选择性指数 >60 倍),通过 VHL、泛素和蛋白酶体依赖途径诱导 PTPN2 降解,可促进 T 细胞活化并增强 IFN-γ 介导的抗癌活性,可用于进一步研究 PTPN2 在白血病和黑色素瘤等疾病中的作用(粉色:PTPN2 配体 (MS-S02239);蓝色:VHL 配体 (MS-R95960);黑色:连接子 (MS-U11101))。
产品编号: MS-K59638 CAS No.: 3032975-48-4 分子式: C48H55F4N9O11S2 分子量: 1074.13
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

PVD-06 是一种选择性 PROTAC PTPN2 降解剂,其 DC50 值为 217 nM(对 PTP1B 的选择性指数 >60 倍),通过 VHL、泛素和蛋白酶体依赖途径诱导 PTPN2 降解,可促进 T 细胞活化并增强 IFN-γ 介导的抗癌活性,可用于进一步研究 PTPN2 在白血病和黑色素瘤等疾病中的作用(粉色:PTPN2 配体 (MS-S02239);蓝色:VHL 配体 (MS-R95960);黑色:连接子 (MS-U11101))。

生物实验数据

生物活性 PVD-06 is a selective PROTAC PTPN2 degrader with a DC50 value of 217 nM (selectivity index >60-fold over PTP1B) that induces PTPN2 degradation via a VHL-, ubiquitin-, and proteasome-dependent pathway, promotes T cell activation, enhances IFN-γ-mediated anticancer activity, and can be used for further investigation of the role of PTPN2 in diseases such as leukemia and melanoma (pink: PTPN2 ligand (MS-S02239); blue: VHL ligand (MS-R95960); black: linker (MS-U11101)).
IC50 & Target

PTPN2

体外研究
(In Vitro)

PVD-06 (0.1-10 μM,1-48 小时) 可通过 VHL、泛素和蛋白酶体依赖性途径诱导 PTPN2 降解并降低 PTPN2 蛋白水平。
PVD-06 (0.1-10 μM,1-48 小时) 在 Jurkat 细胞中可增强关键下游信号传导节点 STAT1 的磷酸化,证实该效应依赖于选择性 PTPN2 降解。
PVD-06 (1.25-5 μM,3 天) 以浓度依赖性方式促进 CD3/CD28 刺激下的 T 细胞增殖。
PVD-06 (1.25-5 μM,96 小时) 在 IFN-γ 存在的情况下以浓度依赖性方式显著增强对 B16F10 细胞生长的抑制。

Western Blot Analysis

Cell Line: Jurkat, B16F10, HepG2 and mouse spleen cells
Concentration: 0.1, 0.013, 0.04, 0.12, 0.37, 1, 1.1, 3.5, 5, 10 and 50 μM
Incubation Time: 24 h
Result: Induced PTPN2 degradation in a concentration-dependent manner without the hook effect.
Showed excellent PTPN2 subtype selectivity in B16F10 and mouse spleen cell models, consistent with the experimental results in the Jurkat cells.
Induced remarkable PTPN2 degradation without affecting the levels of PTP1B, SHP-1, and SHP-2.
Induced PTPN2 degradation on the HepG2 cell line, but it did not affect the PTP1B level.
Significantly reduced the PTPN2 level but not the PTP1B level in mouse spleen cells.
Significantly induced PTPN2 degradation in B16F10 cells, while the PTP1B level remained unchanged.
Dose dependently increased STAT1 phosphorylation after 24 h on the Jurkat cell line in the presence of 10 ng/mL IFN-γ.
Increased STAT1 phosphorylation by degrading PTPN2 selectively.

Western Blot Analysis

Cell Line: Jurkat cells
Concentration: 1 μM
Incubation Time: 1, 2, 3, 6, 9, 12, 24, 36, and 48 h
Result: Induced PTPN2 degradation in a time-dependent manner without affecting the PTP1B level at all time points.
The degradation induced was weakened by the addition of excessive PTPN2 ligand M8, proteasome inhibitor MG132 (MS-L06849), NEDD8-activating enzyme inhibitor MLN4924 (MS-C57164), or VHL E3 ligase ligand VM5.
Induced degradation through the PTPN2 ligand-dependent and VHL-dependent ubiquitin proteasomal degradation pathway.
性状 固体
颜色 White to off-white

化学信息

分子量 1074.13
分子式 C48H55F4N9O11S2
CAS No. 3032975-48-4

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (93.10 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM0.9310 mL4.6549 mL9.3099 mL23.2747 mL
5 mM0.1862 mL0.9310 mL1.8620 mL4.6549 mL
10 mM0.0931 mL0.4655 mL0.9310 mL2.3275 mL
15 mM0.0621 mL0.3103 mL0.6207 mL1.5516 mL
20 mM0.0465 mL0.2327 mL0.4655 mL1.1637 mL
25 mM0.0372 mL0.1862 mL0.3724 mL0.9310 mL
30 mM0.0310 mL0.1552 mL0.3103 mL0.7758 mL
40 mM0.0233 mL0.1164 mL0.2327 mL0.5819 mL
50 mM0.0186 mL0.0931 mL0.1862 mL0.4655 mL
60 mM0.0155 mL0.0776 mL0.1552 mL0.3879 mL
80 mM0.0116 mL0.0582 mL0.1164 mL0.2909 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础