GZD-552 是一种强效的口服有效 FAK 抑制剂,对人源 FAK 的 IC50 为 5.8 nM,可抑制 FAK 的磷酸化激活及下游 ERK 信号通路,诱导细胞凋亡和 G2/M 期细胞周期阻滞,在多形性胶质母细胞瘤细胞中表现出抗增殖活性,并在小鼠异种移植模型中表现出抗肿瘤功效,可用于多形性胶质母细胞瘤的相关研究。
GZD-552
产品编号: MS-K21992 分子式: C27H30F3N5O6 分子量: 577.55
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

GZD-552 是一种强效的口服有效 FAK 抑制剂,对人源 FAK 的 IC50 为 5.8 nM,可抑制 FAK 的磷酸化激活及下游 ERK 信号通路,诱导细胞凋亡和 G2/M 期细胞周期阻滞,在多形性胶质母细胞瘤细胞中表现出抗增殖活性,并在小鼠异种移植模型中表现出抗肿瘤功效,可用于多形性胶质母细胞瘤的相关研究。

生物实验数据

生物活性 GZD-552 is a potent, orally active FAK inhibitor with an IC50 of 5.8 nM against human FAK that inhibits FAK phosphorylation/activation and the downstream ERK signaling pathway, induces apoptosis and G2/M cell cycle arrest, exhibits antiproliferative activity in glioblastoma multiforme cells, and demonstrates antitumor efficacy in mouse xenograft models, making it useful for research on glioblastoma multiforme.
体外研究
(In Vitro)

GZD-552 (compound 16c) 可强效且选择性地抑制 U87-MG 和 U118-MG 胶质母细胞瘤细胞的增殖,其 IC50 值分别为 6.6 nM 和 4.3 nM;同时该化合物对 NCI-H1975 细胞 (IC50 = 0.16 μM)、MDA-MB-231 细胞 (IC50 = 0.28 μM) 和 LO2 细胞 (IC50 = 0.74 μM) 的活性有限。
GZD-552 可在 U87-MG 细胞中与 FAK 蛋白发生强且稳定的结合。
GZD-552 (0.002-0.08 μM) 以浓度依赖的方式抑制 U87-MG 细胞中 FAK 蛋白的表达与激活,并下调下游 ERK 的磷酸化水平。
GZD-552 (0.004-0.12 μM; 24 h) 可在 U87-MG 细胞中诱导剂量依赖性凋亡及 G2/M 期细胞周期阻滞。

Cell Cycle Analysis

Cell Line: U87-MG cells
Concentration: 0.004; 0.04; 0.08; 0.12 μM
Incubation Time: 24 h
Result: Induced apoptosis in U87-MG cells in a concentration manner.
Exhibited early apoptosis rate of 8.99% and the late apoptosis rate of 19% at 0.12 μM.

Apoptosis Analysis

Cell Line: U87-MG cells
Concentration: 0.004; 0.04; 0.08; 0.12 μM
Incubation Time: 24 h
Result: Induced G2/M cell cycle arrest in U87-MG cells in a concentration manner.
Increased the proportions of cells in
the G2/M phase to 54.09%, 57.22%, 68.77%, and 71.74%, at 0.004, 0.04, 0.08, and 0.12 μM, respectively.
体内研究
(In Vivo)

GZD-552 (compound 16c) (10-20 mg/kg,灌胃,每日给药,连续 18 天) 可在小鼠 U87-MG 异种移植模型中抑制肿瘤生长,且无可见的全身毒性。

Animal Model: Female BALB/c nude mice (5-week-old, 18-22 g) subcutaneously injected with U87-MG cells
Dosage: 10; 20 mg/kg/day
Administration: i.g.; daily; 18 days
Result: Achieved a tumor growth inhibition (TGI) rate of 92.36%.
Achieved a tumor growth inhibition (TGI) rate of 96.68%.
Caused no significant fluctuations in mouse body weight.
Showed no histological abnormalities in heart, liver, spleen, lung, and kidney compared to the control group.
Significantly inhibited FAK, p-FAK, ERK, and p-ERK protein expression in tumor tissues.

化学信息

分子量 577.55
分子式 C27H30F3N5O6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础