AUH-6-96 是一种 JAK/STAT 信号抑制剂,可降低果蝇细胞中由 Unpaired 诱导的转录活性并阻断 STAT92E 的酪氨酸磷酸化,阻断组成型及 IL-6 诱导的 STAT3 磷酸化,降低酪氨酸磷酸化的 JAK3 水平,通过下调 STAT3 下游抗凋亡基因的表达诱导癌细胞凋亡 (Apoptosis),选择性降低存在 JAK/STAT 信号通路异常的癌细胞的细胞活力,并可用于霍奇金淋巴瘤、乳腺癌、前列腺癌的相关研究。
产品编号: MS-J68783 CAS No.: 1005144-85-3 分子式: C28H20F6N4O5 分子量: 606.47
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

AUH-6-96 是一种 JAK/STAT 信号抑制剂,可降低果蝇细胞中由 Unpaired 诱导的转录活性并阻断 STAT92E 的酪氨酸磷酸化,阻断组成型及 IL-6 诱导的 STAT3 磷酸化,降低酪氨酸磷酸化的 JAK3 水平,通过下调 STAT3 下游抗凋亡基因的表达诱导癌细胞凋亡 (Apoptosis),选择性降低存在 JAK/STAT 信号通路异常的癌细胞的细胞活力,并可用于霍奇金淋巴瘤、乳腺癌、前列腺癌的相关研究。

生物实验数据

生物活性 AUH-6-96 is a JAK/STAT signaling inhibitor that reduces Unpaired-induced transcriptional activity in Drosophila cells and blocks tyrosine phosphorylation of STAT92E, blocks constitutive and IL-6-induced STAT3 phosphorylation, decreases tyrosine-phosphorylated JAK3 levels, induces cancer cell apoptosis (Apoptosis) by downregulating the expression of anti-apoptotic genes downstream of STAT3, selectively reduces the cell viability of cancer cells with aberrant JAK/STAT signaling, and can be used for research related to Hodgkin's lymphoma, breast cancer, and prostate cancer.
IC50 & Target

JAK3

 

STAT3

 

体外研究
(In Vitro)

AUH-6-96 (5-40 μM; 24 h) 可抑制培养的黑腹果蝇 S2-NP 细胞中 STAT92E 的转录活性,其中 10 μM 处理可使活性降低 50% 以上,40 μM 处理 24 h 则可完全阻断该活性。
AUH-6-96 (40 μM; 24 h) 几乎可以完全抑制瞬时转染的黑腹果蝇 S2-NP 细胞中 Upd 诱导的 STAT92E 酪氨酸磷酸化。
AUH-6-96 (5-40 μM; 24 h) 以剂量依赖的方式抑制 MDA-MB-468 和 DU145 癌细胞中组成型 STAT3 的磷酸化。

Western Blot Analysis

Cell Line: Human cancer cell lines (Hodgkin lymphoma L540, breast cancer MDA-MB-468, prostate cancer DU145)
Concentration: 5, 10, 20, 30, 40 μM
Incubation Time: 24 h
Result: Reduced constitutive phospho-STAT3 levels by more than 50% in L540 cells at 10 μM.
Almost completely inhibited phospho-STAT3 levels in L540 cells at 40 μM.
Caused a dramatic reduction in constitutive phospho-STAT3 levels in MDA-MB-468 and DU145 cells at 40 μM.
Left total STAT3 levels unchanged in all cell lines.

Western Blot Analysis

Cell Line: Hodgkin lymphoma L540 cells
Concentration: 5, 10, 20, 30, 40 μM
Incubation Time: 24 h
Result: Almost completely eliminated constitutive phospho-JAK3 levels, while total JAK3 levels remained unchanged.
Inhibited phospho-STAT5 levels in a dose-dependent manner, with total STAT5 levels unchanged.
Did not affect Lyn phosphorylation at 20 μM.
Reduced phospho-Lyn levels but also lowered total Lyn levels at 40 μM.
Caused no changes in phospho-ERK1/2 or total ERK1/2 levels at concentrations up to 40 μM.

化学信息

分子量 606.47
分子式 C28H20F6N4O5
CAS No. 1005144-85-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础