| 生物活性 | ACY-775 is a potent and selective histone deacetylase 6 (HDAC6) inhibitor with an IC50 value of 7.5 nM, and it also inhibits MBLAC2. |
| IC50 & Target | HDAC3:11223 nM, HDAC1:2123 nM, HDAC6:7.5 nM, HDAC2:2570 nM |
| 体外研究 (In Vitro) |
In vehicle-treated cells, α-tubulin is mainly presented in the deacetylated form, while histone 3 is clearly acetylated. Upon treatment with ACY-775, a clear enhancement of the acetylation of α-tubulin is visible, while histone acetylation remains unaltered. Acetylation of α-tubulin is visualized by immunofluorescence and the intensity in the neurites of the neurons is quantified and normalized to the length of the fluorescent signal. In vehicle-treated DRG neurons, acetylated α-tubulin is already present. Upon treatment with ACY-775 the signal intensity of acetylated α-tubulin increases significantly. Significant increase in motility of mitochondria and also the total number of mitochondria within the neurites are observed compare with vehicle-treated DRG neurons. A significantly higher number of retrogradely transport mitochondria is observed in DRG neurons treated with ACY-775 compare with vehicle-treated cells. |
| 体内研究 (In Vivo) |
Biodistribution profiles of ACY-738, ACY-775, and tubastatin A are examined after acute dosing at 5 or 50 mg/kg over 2 h. At t=30 min after acute 50 mg/kg injection, respective plasma levels of ACY-738 and ACY-775 are 515 ng/mL (1.9 μM) and 1359 ng/mL (4.1 μM). Elimination from plasma is rapid, with plasmatic half-life of 12 min and concentration below 10 ng/mL after 2 h. Nevertheless, areas under concentration time curves for brain and plasm calculated over 2 h for both ACY-738 and ACY-775 lead to ratios >1. When ACY-738 (5 mg/kg) or ACY-775 (50 mg/kg) are administered repeatedly in wild-type mice at 24 h, 4 h, and 30 min before killing, significant increases in α-tubulin acetylation are observed in all tested brain regions. |
| 性状 | 固体 |
| 颜色 | White to off-white |
| 分子量 | 330.36 |
| 分子式 | C17H19FN4O2 |
| CAS No. | 1375466-18-4 |
| 体内实验配方 | 10% DMSO+40% PEG300+5% Tween 80+45% Saline: 10 mg/mL (30.27 mM), Solution. 10% DMSO+90% Saline: < 10 mg/mL (30.27 mM), Lower concentrations may be soluble, but exact solubility limit is unknown. 请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 储存方式 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 25 mg/mL (75.68 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。