MDL-19744A 是一种具有口服活性和选择性的 α1-肾上腺素能受体拮抗剂,对大鼠 α1-肾上腺素能受体的 IC50 为 8 nM,可增加肾血流量、剂量依赖性降低平均动脉血压、增加尿钠排泄并介导肾血管舒张,可用于高血压的研究。
产品编号: MS-J64059 CAS No.: 97233-26-6 分子式: C21H25NO3S 分子量: 371.49
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

MDL-19744A 是一种具有口服活性和选择性的 α1-肾上腺素能受体拮抗剂,对大鼠 α1-肾上腺素能受体的 IC50 为 8 nM,可增加肾血流量、剂量依赖性降低平均动脉血压、增加尿钠排泄并介导肾血管舒张,可用于高血压的研究。

生物实验数据

生物活性 MDL-19744A is an orally active and selective α1-adrenergic receptor antagonist with an IC50 of 8 nM for rat α1-adrenergic receptors that increases renal blood flow, dose-dependently lowers mean arterial blood pressure, increases urinary sodium excretion, and mediates renal vasodilation, and can be used for research on hypertension.
IC50 & Target

α1-adrenergic receptor

 

体外研究
(In Vitro)

MDL-19744A (Compound 1) 可强效且选择性地抑制大鼠大脑皮层组织中 α1-肾上腺素能受体的结合,其针对 α1 受体的 IC50 为 8 nM。
MDL-19744A (30 分钟) 可强效拮抗离体兔主动脉条中由 α1-肾上腺素能受体介导的血管收缩作用,其 pA2 值为 8.13。
MDL-19744A (3 μM) 对离体豚鼠心室无 β-肾上腺素能受体阻滞剂活性。

体内研究
(In Vivo)

MDL-19744A (Compound 1) (30 mg/kg;口服;单次给药) 可使清醒自发性高血压大鼠的平均动脉血压最大降低 -70 mmHg。
MDL-19744A (0.03-3 mg/kg;静脉注射;单次给药) 可使麻醉状态下的正常血压犬出现平均动脉血压降低,其中低血压效应的 ED15 为 0.08 mg/kg,静脉注射 1 mg/kg 时平均动脉血压最大降幅为 -47 mmHg。
MDL-19744A (0.01-1 mg/kg;静脉注射;累积给药) 可使麻醉状态下的正常血压犬出现剂量依赖性的肾血流量增加、尿钠排泄增多。

MDL-19744A (0.1-3 mg/kg;静脉注射;单次给药) 可选择性拮抗脊髓大鼠体内的 α1-肾上腺素能受体,在 0.1-1.0 mg/kg i.v.时可改变 Phenylephrine (MS-X71385) 诱导的升压反应,而在 3.0 mg/kg i.v. 时仅对 α2 介导的反应产生微弱影响。

Animal Model: spontaneously hypertensive rats (SHR) (conscious)
Dosage: 30 mg/kg
Administration: p.o.; single dose
Result: Produced a maximal decrease in mean arterial blood pressure of -70 mmHg.
Animal Model: normotensive dogs (anesthetized)
Dosage: 0.01 mg/kg; 0.03 mg/kg; 0.1 mg/kg; 0.3 mg/kg; 1.0 mg/kg
Administration: i.v.; cumulative dose
Result: Produced a 9% increase in renal blood flow and a -5% change in mean arterial blood pressure at 0.01 mg/kg cumulative dose.
Produced a 17% increase in renal blood flow and a -9% change in mean arterial blood pressure at 0.03 mg/kg cumulative dose.
Produced a 27% increase in renal blood flow and a -15% change in mean arterial blood pressure at 0.1 mg/kg cumulative dose.
Produced a 34% increase in renal blood flow, a -23% change in mean arterial blood pressure, and increased urinary sodium excretion from a baseline of 42 to 104 µequiv/min at 0.3 mg/kg cumulative dose.
Produced a 42% increase in renal blood flow and a -32% change in mean arterial blood pressure at 1.0 mg/kg cumulative dose.
Animal Model: rats
Dosage: 0.1 mg/kg; 0.3 mg/kg; 1.0 mg/kg; 3 mg/kg
Administration: i.v.; single dose
Result: Shifted the Phenylephrine-induced diastolic blood pressure dose-response curve (DR2 = 0.07, 0.02 mg/kg) at doses of 0.1-1.0 mg/kg.
Weakly affected α2-mediated responses at 3.0 mg/kg i.v.

化学信息

分子量 371.49
分子式 C21H25NO3S
CAS No. 97233-26-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础