Vabicaserin hydrochloride

Synonyms: SCA 136
Vabicaserin hydrochloride 是一种选择性 5-羟色胺2C (5-HT2C) 受体激动剂,其 EC50 为 8 nM。
产品编号: MS-J63290 纯度: 99.47% CAS No.: 887258-94-8 分子式: C15H21ClN2 分子量: 264.79
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

Vabicaserin hydrochloride 是一种选择性 5-羟色胺2C (5-HT2C) 受体激动剂,其 EC50 为 8 nM。

生物实验数据

生物活性 Vabicaserin hydrochloride is a selective 5-hydroxytryptamine 2C (5-HT2C) receptor agonist with an EC50 of 8 nM.
IC50 & Target 5-HT2C:8 nM (EC50)
体外研究
(In Vitro)

Vabicaserin displaces 125I-(2,5-dimethoxy)phenylisopropylamine binding from human 5-HT2C receptor sites in Chinese hamster ovary cell membranes with a Ki value of 3 nM and is >50-fold selective over a number of serotonergic, noradrenergic, and dopaminergic receptors. Binding affinity determined for the human 5-HT2B receptor subtype using [3H]5HT is 14 nM. Vabicaserin is a potent and full agonist (EC50, 8 nM; Emax, 100%) in stimulating 5-HT2C receptor-coupled calcium mobilization and exhibits 5-HT2A receptor antagonism and 5-HT2B antagonist or partial agonist activity in transfected cells, depending on the level of receptor expression. Vabicaserin exhibits lower affinity at the 5-HT2C antagonist binding site (22 nM) labeled with [3H]mesulergine. Additional binding studies indicate that Vabicaserin possesses affinity for the 5-HT2B and 5-HT1A receptors with Ki values of 14 and 112 nM, respectively.

体内研究
(In Vivo)

After a single oral dose of [14C]Vabicaserin at 50, 5, and 15 mg/kg, unchanged drug represents less than 19, 20, and 35% of total plasma radioactivity at all the time points examined in mice, rats, and dogs, respectively. The carbamoyl glucuronide (CG) represents approximately 7 to 36% of plasma radioactivity in mice and 2 to 28% of plasma radioactivity in dogs but is not detected in rat plasma after the single [14C]Vabicaserin dose. However, the CG is observed in rat plasma after multiple-dose administration of Vabicaserin at higher doses, and the CG is approximately 20 times less than Vabicaserin based on steady-state AUC0-24 values. The estimated plasma AUC0-24 ratios of CG to the parent drug are 1.5 and 1.7 in mice and dogs after the single [14C]Vabicaserin dose, respectively. The plasma AUC0-24 ratios for the CG to Vabicaserin at steady state with doses used for safety assessment are less for mice (0.2-0.6) and slightly higher for dogs (1.8-4.0) compared with the single dose values. The CG is detected in dog urine in similar amounts to the parent drug, although it is not detected in mouse or rat urine after the single [14C]Vabicaserin dose. Radioactivity in a 0- to 24-h bile collection from rats receiving a 5 mg/kg [14C]Vabicaserin dose accounts for 19 and 24% of the administered dose in males and females, respectively. Although the CG is not detected in urine or feces of rats after a single oral administration, it represents an average of up to 30% of biliary radioactivity in male rats and 15% in female rats. In monkeys after a single oral 25-mg/kg dose of Vabicaserin, the plasma concentrations of the CG exceeded those of Vabicaserin at all the time points (2-24 h) postdose, although the amount of CG relative to Vabicaserin decreased by 24 h postdose, with ratios of 17.5 at 2 h and 1.7 at 24 h. The CG to Vabicaserin AUC0-24 ratio of 12:1 indicates that the CG is a major metabolite in monkeys.

性状 固体
颜色 Light yellow to yellow

化学信息

分子量 264.79
分子式 C15H21ClN2
CAS No. 887258-94-8
别名 SCA 136

储存&溶解度

体内实验配方
10% DMSO+90% Saline: 10 mg/mL (37.77 mM), Solution.
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (7.55 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 60 mg/mL (226.59 mM; 超声助溶 (<80°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

H2O 中的溶解度 : 4 mg/mL (15.11 mM; 超声助溶)

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM3.7766 mL18.8829 mL37.7658 mL94.4144 mL
5 mM0.7553 mL3.7766 mL7.5532 mL18.8829 mL
10 mM0.3777 mL1.8883 mL3.7766 mL9.4414 mL
15 mM0.2518 mL1.2589 mL2.5177 mL6.2943 mL
DMSO20 mM0.1888 mL0.9441 mL1.8883 mL4.7207 mL
25 mM0.1511 mL0.7553 mL1.5106 mL3.7766 mL
30 mM0.1259 mL0.6294 mL1.2589 mL3.1471 mL
40 mM0.0944 mL0.4721 mL0.9441 mL2.3604 mL
50 mM0.0755 mL0.3777 mL0.7553 mL1.8883 mL
60 mM0.0629 mL0.3147 mL0.6294 mL1.5736 mL
80 mM0.0472 mL0.2360 mL0.4721 mL1.1802 mL
100 mM0.0378 mL0.1888 mL0.3777 mL0.9441 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础