ON 146040 是一种有效的 PI3Kα 和 PI3Kδ 抑制剂,IC50 分别约为 14 和 20 nM,同时也抑制 Abl1(IC50<150 nM)。
产品编号: MS-J50386 纯度: 95.05% CAS No.: 1404231-34-0 分子式: C24H23N7O3S 分子量: 489.55
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

ON 146040 是一种有效的 PI3Kα 和 PI3Kδ 抑制剂,IC50 分别约为 14 和 20 nM,同时也抑制 Abl1(IC50<150 nM)。

生物实验数据

生物活性 ON 146040 is a potent PI3Kα and PI3Kδ inhibitor with IC50 values of approximately 14 and 20 nM, respectively, and it also inhibits Abl1 (IC50<150 nM).
IC50 & Target PI3Kγ:1 μM, PI3Kα:14 nM, PI3Kβ:3 μM, PI3Kδ:20 nM, Abl-1:150 nM
体外研究
(In Vitro)

In biochemical testing, ON 146040 inhibits PI3Kα/ PI3Kδ isoforms (IC50≈14 and 20 nM, respectively) without having a major effect on PI3Kβ/ PI3Kγ isoforms (IC50≈3 and 1 μM, respectively). ON 146040 is also found to inhibit Abl1 and several mutant versions of this kinase (IC50<150 nM), although ON 146040 is not found to be active against the T315I mutant. ON 146040 represents the first dual PI3K and BCR-ABL inhibitor that targets the STAT3 and STAT5 pathways. ON 146040 disrupts the oncogenic activity of both STAT3 and STAT5 by targeting upstream activators, including PI3K α and δ isoforms as well as wild type and mutant BCR-ABL. ON 146040 is highly potent in killing hematologic tumor cells with IC50 values in the 150 to 1,000 nM range. Following treatment with ON 146040, STAT3 and STAT5 phosphorylation are down-regulated in leukemia and myeloma cells.

性状 固体
颜色 Brown to reddish brown

化学信息

分子量 489.55
分子式 C24H23N7O3S
CAS No. 1404231-34-0

储存&溶解度

储存方式

4°C, protect from light

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 25 mg/mL (51.07 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.0427 mL10.2135 mL20.4269 mL51.0673 mL
5 mM0.4085 mL2.0427 mL4.0854 mL10.2135 mL
10 mM0.2043 mL1.0213 mL2.0427 mL5.1067 mL
15 mM0.1362 mL0.6809 mL1.3618 mL3.4045 mL
20 mM0.1021 mL0.5107 mL1.0213 mL2.5534 mL
25 mM0.0817 mL0.4085 mL0.8171 mL2.0427 mL
30 mM0.0681 mL0.3404 mL0.6809 mL1.7022 mL
40 mM0.0511 mL0.2553 mL0.5107 mL1.2767 mL
50 mM0.0409 mL0.2043 mL0.4085 mL1.0213 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础