RIP1-IN-1 是一种口服有效的 RIP1 抑制剂,具有强的 RIP1 结合亲和力(Kd:110 nM)和强的抗坏死性凋亡(Necroptosis)活性,可通过阻断 RIP1、RIP3 和 MLKL 信号通路的磷酸化有效抑制坏死小体的形成,从而抑制坏死性凋亡,并可用于急性肝损伤的研究。
RIP1-IN-1
产品编号: MS-J43290 分子式: C26H21N3O3 分子量: 423.46
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

RIP1-IN-1 是一种口服有效的 RIP1 抑制剂,具有强的 RIP1 结合亲和力(Kd:110 nM)和强的抗坏死性凋亡(Necroptosis)活性,可通过阻断 RIP1、RIP3 和 MLKL 信号通路的磷酸化有效抑制坏死小体的形成,从而抑制坏死性凋亡,并可用于急性肝损伤的研究。

生物实验数据

生物活性 RIP1-IN-1 is an orally active RIP1 inhibitor with strong RIP1 binding affinity (Kd: 110 nM) and potent anti-necroptosis activity that effectively inhibits necrosome formation by blocking the phosphorylation of the RIP1, RIP3, and MLKL signaling pathways, thereby inhibiting necroptosis, and can be used for research on acute liver injury.
IC50 & Target

RIPK1

110 nM (Kd)

体外研究
(In Vitro)

RIP1-IN-1 (Compound N-1) (0-1.6 μM,5-24h) 可以有效且剂量依赖性地抑制 Z-VAD-FMK (MS-L66221) 诱导的 HT-29 细胞坏死性凋亡,以及 Z-VAD-FMK (MS-L66221) 诱导的 U937 细胞坏死性凋亡。
RIP1-IN-1 在 HT-29 细胞中表现出强效的抗坏死性凋亡活性 (CC50:>50 μM, EC50:8.8 nM)。
RIP1-IN-1 (0.4 μM,2-6 h) 有效抑制 Z-VAD-FMK (MS-L66221) 处理的 HT-29 细胞中 RIP1 和 RIP3 的磷酸化,具有时间依赖性,从而抑制下游靶标 MLKL 的磷酸化。
RIP1-IN-1 (0.097-400 nM 5h) 剂量依赖性抑制 RIP1/3 和 MLKL 的磷酸化。
RIP1-IN-1 (400 nM, 6 h) 在 HT-29 细胞中通过阻断 RIP1/RIP3/MLKL 通路的磷酸化来抑制 Z-VAD-FMK 诱导的坏死小体形成,从而显示其抗坏死凋亡活性。

Western Blot Analysis

Cell Line: Z-VAD-FMK (30 μM) treated HT-29 cells
Concentration: 0.097、1.562、25、400 nM
Incubation Time: 2-6 h
Result: Prevented the phosphorylation of both RIP1 and RIP3 within 2-6 h and subsequently inhibited downstream target MLKL phosphorylation.
Reduced pRIP1, pRIP3, and pMLKL levels in a dose-dependent manner in the range of 0.097-400 nM.
体内研究
(In Vivo)

RIP1-IN-1 (Compound N-1) (1、3、5 mg/kg,口服) 在 SIRS (全身炎症反应综合征) 小鼠中表现出抗坏死凋亡作用。
RIP1-IN-1 (3 mg/kg,口服,每天一次,连续 14 天) 在 CCl4 诱发的小鼠急性肝损伤模型中表现出对急性肝损伤的保护作用
RIP1-IN-1 (10 mg/kg,口服) 在 Sprague-Dawley 大鼠中表现出短的半衰期和高的清除率。

Animal Model: C57BL/6 mice; Establishment of SIRS mice model by combining mTNF-α (65 μg/kg) and Z-VAD-FMK (200 μg/piece)
Dosage: 1, 3, 5 mg/kg (5 % DMSO and 95 % CMC-Na solution)
Administration: p.o.
Result: Significantly improved the survival rate of SIRS mice, reaching 20%, 50% and 90%.
Alleviated mTNF-α-induced hypothermia within 9 hours.
Significantly reduced serum IL-6 levels, indicating its anti-inflammatory effect.
Animal Model: Male ICR mice (6-8 weeks old), 0.01 % CCl4 induced acute liver injury mice model
Dosage: 1, 3, 5 mg/kg (5 % DMSO and 95 % CMC-Na solution)
Administration: i.g., once daily for 14 consecutive days
Result: Significantly reduced RIP1, RIP3, and MLKL phosphorylation in diseased mice, thereby restoring AST and ALT markers indicative of liver damage.
HE staining showed that the liver tissue structure was close to normal at a dose of 3mg/kg and 5mg/kg, and the damage was significantly reduced.
The result showed that ALT, AST, and IL-6 levels were significantly reduced and close to the normal range, indicating that it can play a protective role against acute liver damage.
Western Blot results showed that it can effectively inhibit phosphorylation and block the necroptosis pathway.

化学信息

分子量 423.46
分子式 C26H21N3O3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础