L-Canaline 是一种存在于许多豆科植物中的非蛋白质氨基酸,是 L-canavanine 经精氨酸酶催化产生的毒性代谢产物,也是一种有效且不可逆的鸟氨酸氨基转移酶抑制剂,可以 IC50 为 297 nM 抑制疟原虫恶性疟原虫的生长,并具有抗癌和抗增殖作用。
产品编号: MS-J28692 纯度: 99.38% CAS No.: 496-93-5 分子式: C4H10N2O3 分子量: 134.13
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in Water
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
50mg
询价
询价

产品描述

L-Canaline 是一种存在于许多豆科植物中的非蛋白质氨基酸,是 L-canavanine 经精氨酸酶催化产生的毒性代谢产物,也是一种有效且不可逆的鸟氨酸氨基转移酶抑制剂,可以 IC50 为 297 nM 抑制疟原虫恶性疟原虫的生长,并具有抗癌和抗增殖作用。

生物实验数据

生物活性 L-Canaline is a non-protein amino acid found in many legumes and a toxic metabolite of L-canavanine catalyzed by arginase, acting as a potent and irreversible inhibitor of ornithine aminotransferase that inhibits the growth of the malaria parasite Plasmodium falciparum with an IC50 of 297 nM and exhibits anticancer and antiproliferative effects.
IC50 & Target P. falciparum:297 nM
体外研究
(In Vitro)

L-Canaline treatment inhibits the proliferation of PBMCs after stimulation by phorbol 12-myristate-13-acetate (PMA) or via the mixed lymphocyte reaction. The greatest effect is seen with PMA-stimulated cells, where L-canaline has an IC50 of 0.26 mM. L-Canaline is slightly less toxic to PBMCs stimulated via the mixed lymphocyte reaction (IC50 of 0.54 mM). L-canaline inhibits L-lysine flux competitively (Ki of 4.6 mM) in astrocytes and astrocytoma cells.

体内研究
(In Vivo)

L-Canaline decreases the aspartic acid content of tissues of the medulla oblongata of male Wistar rats, but it does not affect the evoked release of this nonprotein amino acid into these tissues.
Intraseptal injection of 100 μg of L-canaline into male Sprague-Dawley rats causes a 90% decrease in the omithine aminotransferase activity of the septum tissues evaluated from animals killed 1 h later.

性状 固体
颜色 White to off-white

化学信息

分子量 134.13
分子式 C4H10N2O3
CAS No. 496-93-5

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : 50 mg/mL (372.77 mM; 超声助溶)

DMSO 中的溶解度 : 1 mg/mL (7.46 mM; 超声加热助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO / H2O1 mM7.4555 mL37.2773 mL74.5545 mL186.3863 mL
5 mM1.4911 mL7.4555 mL14.9109 mL37.2773 mL
H2O10 mM0.7455 mL3.7277 mL7.4555 mL18.6386 mL
15 mM0.4970 mL2.4852 mL4.9703 mL12.4258 mL
20 mM0.3728 mL1.8639 mL3.7277 mL9.3193 mL
25 mM0.2982 mL1.4911 mL2.9822 mL7.4555 mL
30 mM0.2485 mL1.2426 mL2.4852 mL6.2129 mL
40 mM0.1864 mL0.9319 mL1.8639 mL4.6597 mL
50 mM0.1491 mL0.7455 mL1.4911 mL3.7277 mL
60 mM0.1243 mL0.6213 mL1.2426 mL3.1064 mL
80 mM0.0932 mL0.4660 mL0.9319 mL2.3298 mL
100 mM0.0746 mL0.3728 mL0.7455 mL1.8639 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础