Sitaxsentan

Synonyms: 司他生坦; IPI 1040; TBC-11251
Sitaxsentan (IPI 1040 sodium; TBC11251 sodium) 是一种强效、选择性、口服活性的内皮素 A 受体 (ETA) 拮抗剂,IC50 为 1.4 nM,Ki 为 0.43 nM,对 ETB 受体的 IC50 高达 9800 nM,经 CYP2C9 和 CYP3A4 代谢,可改善分流诱导的内皮细胞异常、恢复 BMPR 信号通路、抑制肺血管重构和血流动力学恶化,可用于肺动脉高压和门脉性肺动脉高压的相关研究。
产品编号: MS-J01139 CAS No.: 184036-34-8 分子式: C18H15ClN2O6S2 分子量: 454.90
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
询价
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

Sitaxsentan (IPI 1040 sodium; TBC11251 sodium) 是一种强效、选择性、口服活性的内皮素 A 受体 (ETA) 拮抗剂,IC50 为 1.4 nM,Ki 为 0.43 nM,对 ETB 受体的 IC50 高达 9800 nM,经 CYP2C9 和 CYP3A4 代谢,可改善分流诱导的内皮细胞异常、恢复 BMPR 信号通路、抑制肺血管重构和血流动力学恶化,可用于肺动脉高压和门脉性肺动脉高压的相关研究。

生物实验数据

生物活性 Sitaxsentan (IPI 1040 sodium; TBC11251 sodium) is a potent, selective, orally active endothelin A receptor (ETA) antagonist with an IC50 of 1.4 nM and a Ki of 0.43 nM, exhibits an IC50 of up to 9800 nM for the ETB receptor, is metabolized by CYP2C9 and CYP3A4, ameliorates shunt-induced endothelial cell abnormalities, restores BMPR signaling, inhibits pulmonary vascular remodeling and hemodynamic deterioration, and can be used for research on pulmonary arterial hypertension and portopulmonary hypertension.
IC50 & Target

ETA

1.4 nM (IC50)

ETA

0.43 nM (Ki)

ETB

9800 nM (IC50)

体外研究
(In Vitro)

Sitaxsentan (100 μM, 10 min) 显著抑制了三明治法培养的人肝细胞中的牛磺胆酸协同转运蛋白 (NTCP) 和有机阴离子转运蛋白 (OATP) 转运作用。
Sitaxsentan (10 min) 具有高效的肝脏细胞摄取效率,并且几乎不会导致胆汁排泄。
Sitaxsentan 在三明治法培养的人肝细胞中具有中等程度的肝胆转运蛋白胆盐输出泵 (BSEP) 抑制 (IC50= 25μM)。

体内研究
(In Vivo)

Sitaxsentan (1.5 mg/kg, p.o., 一日三次, 持续 3 个月) 能够在小猪上有效预防分流所导致的肺动脉高压,而与 Sildenafil (MS-Y27659) 联合用药时效果更佳。
Sitaxsentan (5 mg/kg, i.v., 单次给药) 可在大鼠急性缺氧模型中完全阻断 ETA 受体激活。
Sitaxsentan (15-30 mg/kg, p.o., 一日一次, 持续 2-4 周) 可显著改善慢性缺氧导致的大鼠肺动脉高压和血管重塑,但对已形成的右心室肥厚改善有限。
Sitaxsentan (10-50 mg/kg, p.o., 一日一次, 持续 3 周) 能在大鼠中剂量依赖性地改善 Monocrotaline (MS-N72986) 诱导的肺动脉高压。

Animal Model: Shunt-induced PAH model established in piglets (18 days old, 5.3 kg)
Dosage: 1.5 mg/kg or 1.5 mg/kg combined with 0.75 mg/kg Sildenafil
Administration: Oral administration (p.o.) with food, three times a day for 3 months
Result: Combined treatment completely restored the normal state.
Partially inhibited the thickening of blood vessels with single-drug and the combined therapy almost completely prevented it.
Partially restored the expression of BMPR-1A and BMPR-2.
Maintained normal right ventricle-aorta coupling.
Animal Model: Acute hypoxia induced PHA model established in male Sprague-Dawley rats
Dosage: 5 mg/kg
Administration: Intravenous injection (i.v.), 10 minutes before or 50 minutes after the onset of hypoxia
Result: Completely blocked the increase in pressure in prevention group.
Rapidly reversed the elevated MPAP after administration of the drug (reaching normal levels within approximately 30 minutes) in treatment group.
Animal Model: Chronic hypoxia induced PHA model established in male Sprague-Dawley rats
Dosage: 15 mg/kg in prevention group and 15 mg/kg and 30 mg/kg in treatment group
Administration: Oral administration (p.o.) with water, once daily, 48 hours before hypoxia and lasting for 2 weeks or after 2 weeks of hypoxia and lasted for 4 weeks
Result: Decreased The MPAP in the prevention group by 35%, and in the treatment group decreased by 38%.
Reduced the ratio of RV/(LV + S) to some extent.
Improved pulmonary vascular remodeling in both groups.
Animal Model: Monocrotaline induced PHA model established in male Sprague-Dawley rats
Dosage: 10 and 50 mg/kg
Administration: Oral administration (p.o.) with water, once daily for 3 weeks
Result: Improved hemodynamic conditions.
Almost completely prevented pulmonary vascular remodeling at high dose (50mg/kg).

化学信息

分子量 454.90
分子式 C18H15ClN2O6S2
CAS No. 184036-34-8
别名 司他生坦; IPI 1040; TBC-11251

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (219.83 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.1983 mL10.9914 mL21.9829 mL54.9571 mL
5 mM0.4397 mL2.1983 mL4.3966 mL10.9914 mL
10 mM0.2198 mL1.0991 mL2.1983 mL5.4957 mL
15 mM0.1466 mL0.7328 mL1.4655 mL3.6638 mL
20 mM0.1099 mL0.5496 mL1.0991 mL2.7479 mL
25 mM0.0879 mL0.4397 mL0.8793 mL2.1983 mL
30 mM0.0733 mL0.3664 mL0.7328 mL1.8319 mL
40 mM0.0550 mL0.2748 mL0.5496 mL1.3739 mL
50 mM0.0440 mL0.2198 mL0.4397 mL1.0991 mL
60 mM0.0366 mL0.1832 mL0.3664 mL0.9160 mL
80 mM0.0275 mL0.1374 mL0.2748 mL0.6870 mL
100 mM0.0220 mL0.1099 mL0.2198 mL0.5496 mL
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础