Polyphyllin H

Synonyms: 重楼皂苷 H
Polyphyllin H 是一种可从 Paris polyphylla 中分离得到的甾体皂苷,能强效抑制 CYP1A2(IC50 = 6.44 μM,竞争性)、CYP2D6(IC50 = 13.88 μM,竞争性)和 CYP3A4(IC50 = 4.52 μM,非竞争性、时间依赖性)的活性,下调 ABCB1 和 ABCC3 的表达,结合膜胆固醇并破坏脂筏结构,从而恢复紫杉醇耐受乳腺癌细胞对紫杉醇的敏感性。
产品编号: MS-I75564 纯度: 99.89% CAS No.: 81917-50-2 分子式: C44H70O17 分子量: 871.02
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

Polyphyllin H 是一种可从 Paris polyphylla 中分离得到的甾体皂苷,能强效抑制 CYP1A2(IC50 = 6.44 μM,竞争性)、CYP2D6(IC50 = 13.88 μM,竞争性)和 CYP3A4(IC50 = 4.52 μM,非竞争性、时间依赖性)的活性,下调 ABCB1 和 ABCC3 的表达,结合膜胆固醇并破坏脂筏结构,从而恢复紫杉醇耐受乳腺癌细胞对紫杉醇的敏感性。

生物实验数据

生物活性 Polyphyllin H is a steroidal saponin isolated from Paris polyphylla that potently inhibits CYP1A2 (IC50 = 6.44 μM, competitive), CYP2D6 (IC50 = 13.88 μM, competitive), and CYP3A4 (IC50 = 4.52 μM, non-competitive, time-dependent), downregulates ABCB1 and ABCC3 expression, binds membrane cholesterol to disrupt lipid rafts, and restores paclitaxel sensitivity in paclitaxel-resistant breast cancer cells.
IC50 & Target

CYP1A2

6.44 μM (IC50)

CYP2D6

13.88 μM (IC50)

CYP3A4

4.52 μM (IC50)

体外研究
(In Vitro)

Polyphyllin H (0-100 μM; 1 h) 可在混合 HLM 中以浓度依赖的方式强效抑制 CYP1A2 (IC50 = 6.44 μM,竞争性)、CYP2D6 (IC50 = 13.88 μM,竞争性) 和 CYP3A4 (IC50 = 4.52 μM,非竞争性、时间依赖性) 的活性。
Polyphyllin H (5-50 μM) 可特异性结合含胆固醇的膜,以剂量依赖的方式诱导钙黄绿素释放,而对不含胆固醇的膜无影响。
Polyphyllin H (100-300 μM) 可以浓度依赖的方式直接与胆固醇结合,这一点可通过增强的 DHE 荧光强度得到证明。
Polyphyllin H (1 μM; 48 h) 可逆转 MCF-7/PTX 细胞对紫杉醇的耐受性,将紫杉醇的 IC50 降至 119.229 nM。
Polyphyllin H (1-2 μM) 可在体外以浓度依赖的方式破坏 MCF-7/PTX 细胞的质膜完整性。
Polyphyllin H (1 μM; 48 h) 可下调 MCF-7/PTX 细胞中外排转运体的蛋白表达。
Polyphyllin H (1-2 μM) 可在体外以浓度依赖的方式破坏 MCF-7/PTX 细胞的质膜完整性。

Cell Cytotoxicity Assay

Cell Line: paclitaxel-resistant MCF-7/PTX human breast cancer cells
Concentration: 1 μM (in combination with paclitaxel); 200 μM exogenous cholesterol (co-incubated with 1 μM Polyphyllin H and paclitaxel)
Incubation Time: 48 h
Result: Reduced the IC50 of paclitaxel in MCF-7/PTX cells to 119.229 nM, resulting in a resistance reversal fold of 5.5.
Had this effect significantly attenuated by addition of exogenous cholesterol.

Western Blot Analysis

Cell Line: paclitaxel-resistant MCF-7/PTX human breast cancer cells
Concentration: 1 μM; 200 μM exogenous cholesterol (co-incubated with 1 μM Polyphyllin H)
Incubation Time: 48 h
Result: Significantly reduced protein expression levels of lipid raft marker CAV-1, and efflux transporters ABCB1 and ABCC3 in MCF-7/PTX cells.
Had this downregulation partially restored by co-treatment with exogenous cholesterol.
体内研究
(In Vivo)

Polyphyllin H (2.5 mg/kg;腹腔注射;每 2 天 1 次;共 21 天) 单独使用可降低紫杉醇耐受乳腺癌异种移植模型的肿瘤生长速率与肿瘤胆固醇水平;与 Paclitaxel 联用时,可通过下调肿瘤胆固醇水平及脂筏相关 ABC 转运蛋白的表达实现约 80% 的肿瘤抑制率,且具有良好的生物安全性。

Animal Model: BALB/c nude (female, 4 weeks old)
Dosage: 2.5 mg/kg (monotherapy); 2.5 mg/kg + 5 mg/kg paclitaxel (combination therapy)
Administration: i.p.; every 2 days; 21 days (monotherapy); i.p. (Polyphyllin H) + i.v. (paclitaxel); every 2 days; 21 days (combination therapy)
Result: Reduced tumor volume and weight compared to the control group.
Reduced total cholesterol levels in tumor tissue compared to the control and paclitaxel-only groups.
Achieved an ~80% tumor inhibition rate (based on final tumor volume), significantly higher than the 55% inhibition rate of lovastatin plus paclitaxel.
Significantly reduced total cholesterol levels in tumor tissue compared to lovastatin plus paclitaxel.
Markedly downregulated protein expression of CAV-1, ABCB1, and ABCC3 in tumor tissue to a greater degree than lovastatin plus paclitaxel.
Caused no significant pathological changes in heart, liver, spleen, lungs, or kidneys of treated mice.
性状 固体
颜色 White to off-white

化学信息

分子量 871.02
分子式 C44H70O17
CAS No. 81917-50-2
别名 重楼皂苷 H

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 100 mg/mL (114.81 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.1481 mL5.7404 mL11.4808 mL28.7020 mL
5 mM0.2296 mL1.1481 mL2.2962 mL5.7404 mL
10 mM0.1148 mL0.5740 mL1.1481 mL2.8702 mL
15 mM0.0765 mL0.3827 mL0.7654 mL1.9135 mL
20 mM0.0574 mL0.2870 mL0.5740 mL1.4351 mL
25 mM0.0459 mL0.2296 mL0.4592 mL1.1481 mL
30 mM0.0383 mL0.1913 mL0.3827 mL0.9567 mL
40 mM0.0287 mL0.1435 mL0.2870 mL0.7175 mL
50 mM0.0230 mL0.1148 mL0.2296 mL0.5740 mL
60 mM0.0191 mL0.0957 mL0.1913 mL0.4784 mL
80 mM0.0144 mL0.0718 mL0.1435 mL0.3588 mL
100 mM0.0115 mL0.0574 mL0.1148 mL0.2870 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础