Lumateperone

Synonyms: ITI-007
Lumateperone (ITI-007) 是一种具有口服活性的 5-HT2A 受体拮抗剂 (Ki = 0.54 nM)、突触前 D2 受体部分激动剂和突触后 D2 受体拮抗剂 (Ki = 32 nM) 以及多巴胺 D1 受体调节剂,具有抗癌活性,也可用于研究精神分裂症和双相抑郁症。
产品编号: MS-I73624 纯度: 99.83% CAS No.: 313368-91-1 分子式: C24H28FN3O 分子量: 393.50
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

Lumateperone (ITI-007) 是一种具有口服活性的 5-HT2A 受体拮抗剂 (Ki = 0.54 nM)、突触前 D2 受体部分激动剂和突触后 D2 受体拮抗剂 (Ki = 32 nM) 以及多巴胺 D1 受体调节剂,具有抗癌活性,也可用于研究精神分裂症和双相抑郁症。

生物实验数据

生物活性 Lumateperone (ITI-007) is an orally active 5-HT2A receptor antagonist (Ki = 0.54 nM), presynaptic D2 receptor partial agonist and postsynaptic D2 receptor antagonist (Ki = 32 nM), and dopamine D1 receptor modulator, with anticancer activity, and can also be used for research on schizophrenia and bipolar depression.
IC50 & Target

D1 Receptor

 

D2 Receptor

 

5-HT2A Receptor

 

体外研究
(In Vitro)

Lumateperone (2-30 μM) has anti-tumor activity and can inhibit cell proliferation in a dose-dependent manner.

Cell Proliferation Assay

Cell Line: RPMI-8226 cells
Concentration: 2-30 μM
Incubation Time: 48 hours
Result: Inhibited cell growth with the IC50 value of 17.30 μM.
体内研究
(In Vivo)

Lumateperone (i.p., 1-10 mg/kg) promotes NMDA and AMPA-induced currents in a dopamine D1 receptor-dependent manner and increases the release of dopamine and glutamate in rat mPFC slices.

Animal Model: Adult male Sprague-Dawley rats
Dosage: 1-10 mg/kg
Administration: Intraperitoneal injection
Result: Inhibited avoidance response at concentrations of 1, 3 and 10 mg/kg after 20 minutes.
Promoted NMDA and AMPA-sensitive currents, also significantly increased dopamine and glutamate release at 10 mg/kg in mPFC cone cells of rat.
性状 油状物
颜色 Light yellow to yellow

化学信息

分子量 393.50
分子式 C24H28FN3O
CAS No. 313368-91-1
别名 ITI-007

储存&溶解度

储存方式

4°C, protect from light

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (254.13 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.5413 mL12.7065 mL25.4130 mL63.5324 mL
5 mM0.5083 mL2.5413 mL5.0826 mL12.7065 mL
10 mM0.2541 mL1.2706 mL2.5413 mL6.3532 mL
15 mM0.1694 mL0.8471 mL1.6942 mL4.2355 mL
20 mM0.1271 mL0.6353 mL1.2706 mL3.1766 mL
25 mM0.1017 mL0.5083 mL1.0165 mL2.5413 mL
30 mM0.0847 mL0.4235 mL0.8471 mL2.1177 mL
40 mM0.0635 mL0.3177 mL0.6353 mL1.5883 mL
50 mM0.0508 mL0.2541 mL0.5083 mL1.2706 mL
60 mM0.0424 mL0.2118 mL0.4235 mL1.0589 mL
80 mM0.0318 mL0.1588 mL0.3177 mL0.7942 mL
100 mM0.0254 mL0.1271 mL0.2541 mL0.6353 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础