Malabaricone C 是一种具有口服活性的非竞争性鞘磷脂合成酶 (SMS) 抑制剂,对 SMS 1 和 SMS 2 的 IC50 值分别为 3 μM 和 1.5 μM,可降低小鼠体重增加、提高葡萄糖耐量、减少肝脏脂质积累,对高脂肪饮食诱导的脂肪肝有显著预防作用,并具有抗炎作用,发现于 Myristica cinnamomea King 的果实中,有望用于肥胖和由 T 细胞过度激活而引起的免疫性疾病的研究。
产品编号: MS-I65689 纯度: 99.46% CAS No.: 63335-25-1 分子式: C21H26O5 分子量: 358.43
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

Malabaricone C 是一种具有口服活性的非竞争性鞘磷脂合成酶 (SMS) 抑制剂,对 SMS 1 和 SMS 2 的 IC50 值分别为 3 μM 和 1.5 μM,可降低小鼠体重增加、提高葡萄糖耐量、减少肝脏脂质积累,对高脂肪饮食诱导的脂肪肝有显著预防作用,并具有抗炎作用,发现于 Myristica cinnamomea King 的果实中,有望用于肥胖和由 T 细胞过度激活而引起的免疫性疾病的研究。

生物实验数据

生物活性 Malabaricone C is an orally active non-competitive sphingomyelin synthase (SMS) inhibitor with IC50 values of 3 μM and 1.5 μM for SMS 1 and SMS 2, respectively; it reduces body weight gain, improves glucose tolerance, decreases hepatic lipid accumulation, and exerts a significant preventive effect on high-fat diet-induced fatty liver in mice, and it also possesses anti-inflammatory activity, is found in the fruit of Myristica cinnamomea King, and holds promise for research on obesity and immune diseases caused by excessive T cell activation.
体外研究
(In Vitro)

Malabaricone C (0.01-1 mM, 3 小时) 对野生型小鼠胚胎成纤维细胞 MEF 几乎没有毒性作用。
Malabaricone C (0.01-1 mM, 3 小时) 降低 HepG2 细胞内甘油三酯水平,降低脂质积累。
Malabaricone C (1-10 μM, 2 小时) 抑制 T 细胞活化、增殖和细胞因子产生。
Malabaricone C (10 μM, 1 小时或 24 小时) 抑制丝裂原诱导的淋巴细胞表面标记物 MAPK 和 NF-κB 的激活。
Malabaricone C (4-10 μ M, 24 小时) 诱导 MCF-7 细胞凋亡。
Malabaricone C (0-6 μM, 9 分钟) 增加 MCF-7 细胞内 Ca2+ 水平,激活钙蛋白酶。

Cell Viability Assay

Cell Line: Mouse embryonic fibroblasts cells
Concentration: 0.01-1 mM
Incubation Time: 3 h
Result: Induced 56−97% of the cells viable after 3 h of treatment at concentration levels of 1-0.01 mM in MEFs.

Immunofluorescence

Cell Line: HepG2 cells
Concentration: 0.01-1 mM
Incubation Time: 3 h
Result: Significantly decreased the levels of intracellular triglycerides in a dose-dependent manner while it exhibited no significant changes in the free fatty acids levels, decreased lipid accumulation in a dose-dependent manner.

Cell Proliferation Assay

Cell Line: Lymphocytes
Concentration: 1-10 μM
Incubation Time: 2 h
Result: Inhibited the proliferation of αCD3/ αCD28-activated T-cells and suppressed the secretion of IL-2 and IFN-γ.

Apoptosis Analysis

Cell Line: MCF-7 cells
Concentration: 4-10 μM
Incubation Time: 24 h
Result: Showed condensed nuclei and showed significantly increased (up to 64%, p < 0.001) sub G1 population in MCF-7 cells.
体内研究
(In Vivo)

Malabaricone C (高脂饮食中添加 0.1%, 口服,每天,持续 8 周) 在高脂饮食诱导的肥胖小鼠模型中可降低体重增加,提高葡萄糖耐量,降低肝脏脂质积累。
Malabaricone C (10 mg/kg, 腹腔注射, 单次给药 24 小时) 抑制小鼠 T 细胞活化和细胞因子分泌。

Animal Model: High fat diet-induced obesity mice models
Dosage: High-fat diet supplemented with 0.1%
Administration: p.o., daily for 8 weeks
Result: Reduced weight gain, improved glucose tolerance, and reduced hepatic steatosis in high fat diet-induced obesity mice models.
Animal Model: Swiss, BALB/c, and C57BL/6 male mice
Dosage: 10 mg/kg
Administration: i.p., a single dose for 24 h
Result: Significantly decreased the percentage of proliferating cells as compared with vehicle control and resulted in significant decrease in mitogen-induced cytokine (IL-2, IFN-γ, and IL-6) secretion by T-cells.
性状 固体
颜色 White to light yellow

化学信息

分子量 358.43
分子式 C21H26O5
CAS No. 63335-25-1

储存&溶解度

体内实验配方
10% DMSO+90% Saline: < 10 mg/mL (27.9 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
10% DMSO+40% PEG300+5% Tween 80+45% Saline: < 10 mg/mL (27.9 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
10% DMSO+90% (20% SBE-β-CD in Saline): 10 mg/mL (27.9 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture and light

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (278.99 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.7899 mL13.9497 mL27.8995 mL69.7486 mL
5 mM0.5580 mL2.7899 mL5.5799 mL13.9497 mL
10 mM0.2790 mL1.3950 mL2.7899 mL6.9749 mL
15 mM0.1860 mL0.9300 mL1.8600 mL4.6499 mL
20 mM0.1395 mL0.6975 mL1.3950 mL3.4874 mL
25 mM0.1116 mL0.5580 mL1.1160 mL2.7899 mL
30 mM0.0930 mL0.4650 mL0.9300 mL2.3250 mL
40 mM0.0697 mL0.3487 mL0.6975 mL1.7437 mL
50 mM0.0558 mL0.2790 mL0.5580 mL1.3950 mL
60 mM0.0465 mL0.2325 mL0.4650 mL1.1625 mL
80 mM0.0349 mL0.1744 mL0.3487 mL0.8719 mL
100 mM0.0279 mL0.1395 mL0.2790 mL0.6975 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础