VHPKQHR 是一种结合 VCAM-1 的肽类递送促进剂,可实现相关纳米材料的细胞内内化,并促进 miRNA 抑制剂向炎症内皮细胞及扰动流激活内皮的靶向递送;当其与磁性介孔硅纳米颗粒偶联时,可在动脉粥样硬化斑块部位实现靶向聚集,当其展示在聚电解质复合胶束表面时,可增强 Apoe-/- 小鼠体内 anti-miR-92a 的相关作用,当其与超小顺磁性氧化铁纳米颗粒偶联时,可形成用于 T1-加权磁共振成像的造影剂,因此 VHPKQHR 可用于动脉粥样硬化、狭窄及类风湿性关节炎的相关研究。
产品编号: MS-I57210 CAS No.: 1174559-81-9 分子式: C39H64N16O9 分子量: 901.03
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

VHPKQHR 是一种结合 VCAM-1 的肽类递送促进剂,可实现相关纳米材料的细胞内内化,并促进 miRNA 抑制剂向炎症内皮细胞及扰动流激活内皮的靶向递送;当其与磁性介孔硅纳米颗粒偶联时,可在动脉粥样硬化斑块部位实现靶向聚集,当其展示在聚电解质复合胶束表面时,可增强 Apoe-/- 小鼠体内 anti-miR-92a 的相关作用,当其与超小顺磁性氧化铁纳米颗粒偶联时,可形成用于 T1-加权磁共振成像的造影剂,因此 VHPKQHR 可用于动脉粥样硬化、狭窄及类风湿性关节炎的相关研究。

生物实验数据

生物活性 VHPKQHR is a VCAM-1-binding peptide-based delivery enhancer that enables intracellular internalization of related nanomaterials and promotes targeted delivery of miRNA inhibitors to inflamed endothelial cells and disturbed flow-activated endothelium; when conjugated with magnetic mesoporous silica nanoparticles, it achieves targeted accumulation at atherosclerotic plaque sites, when displayed on the surface of polyelectrolyte complex micelles, it enhances the relevant effects of anti-miR-92a in Apoe-/- mice, and when conjugated with ultrasmall paramagnetic iron oxide nanoparticles, it forms a contrast agent for T1-weighted magnetic resonance imaging, making VHPKQHR useful for research related to atherosclerosis, stenosis, and rheumatoid arthritis.
IC50 & Target

RDC Peptide

 

体外研究
(In Vitro)

展示 VHPKQHR 的 VCAM-1 靶向聚电解质复合胶束 (30 min) 可通过 VCAM-1 结合作用,选择性且高效地将 miRNA 抑制剂递送至经 LPS 刺激的炎症状态主动脉内皮细胞,其摄取效率显著高于非靶向胶束。
经 VHPKQHR 多肽修饰的 UVHP (5-200 µg/mL Fe; 12-24 h) 在 Fe 浓度高达 200 µg/mL 时,对 RAW264.7 巨噬细胞和 HFLS-RA 细胞的细胞毒性较低。
经 VHPKQHR 肽修饰的 UVHP (25-200 µg/mL Fe; 24 h) 可选择性靶向并被 TNF-α 刺激的、过表达 VCAM-1 的 MAEC 和 HFLS-RA 细胞摄取,且摄取水平显著高于未受刺激的细胞。
VHPKQHR 肽已成功整合至 Fe3O4@SiO2 纳米颗粒中,形成 FITC-VHP-Fe3O4@SiO2,这一点经 UV-Vis 和 FTIR 表征得到证实。

体内研究
(In Vivo)

靶向 VCAM-1 的、展示 VHPKQHR 的聚电解质复合胶束 (静脉注射;术后第 5、8、11 天共注射 3 次) 可递送 miR-92a 抑制剂,使高脂饮食喂养的 Apoe-/- 小鼠中由紊乱流诱导的颈动脉血管病变减少 89.2%。
UVHP (250 µg Fe;经尾静脉静脉注射;单剂量),一种经 VCAM-1 靶向肽 VHPKQHR 修饰的制剂,可显著提高 RA 小鼠膝关节的 T1 加权 MRI 信号强度及 Fe 蓄积量,同时未表现出显著的体内器官毒性。
FITC-VHP-Fe3O4@SiO2 (经 VHPKQHR 多肽修饰) (2.5 mg NP/kg;静脉注射;单次) 可特异性靶向 ApoE-/-小鼠的动脉粥样硬化斑块,缩短 T2 弛豫时间以增强 MRI 对比度,且表现出较低的体内毒性,对器官功能或形态无显著影响。

Animal Model: C57BL/6 background Apoe-/- (high-fat diet fed, partial carotid artery ligation-induced pathological vascular remodeling model)
Dosage: 2 mg/kg miR-92a inhibitor
Administration: i.v.; 3 total injections on days 5, 8, and 11 post-surgery
Result: Reduced disturbed flow-induced carotid lesions by 89.2% compared to PBS-treated controls.
Left serum cholesterol levels and body weights unchanged.
Caused no significant tissue changes in major organs.
Animal Model: C57BL/6 (2-month-old female, antigen-induced rheumatoid arthritis model)
Dosage: 250 µg Fe
Administration: i.v. via tail vein; single dose
Result: Showed significantly higher T1-weighted MRI signal intensity of knee joints compared to UVHP-injected WT mice.
Showed significantly increased Fe content in knee joints compared to UVHP-injected WT mice, USPIO-injected WT mice, and USPIO-injected RA mice.
Demonstrated highest Fe accumulation in spleen, followed by liver, heart, lung, and kidney 24 hours post-injection.
Showed no significant morphological changes in major organs (heart, liver, spleen, lung, kidney) compared to PBS-injected RA mice 14 days post-injection.

化学信息

分子量 901.03
分子式 C39H64N16O9
CAS No. 1174559-81-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础