Seconeolitsine 是一种靶向拓扑异构酶 I (TopA) 的抗生素类抑制剂,也是一种可抑制 S. pneumoniae 生长的的新型抗菌剂,其抑制 TopA 的 IC50 值为 17 μM,可用于对其他抗生素耐药的肺炎链球菌感染的研究。
产品编号: MS-I44138 纯度: 98.65% CAS No.: 2650074-56-7 分子式: C19H17NO4 分子量: 323.34
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

Seconeolitsine 是一种靶向拓扑异构酶 I (TopA) 的抗生素类抑制剂,也是一种可抑制 S. pneumoniae 生长的的新型抗菌剂,其抑制 TopA 的 IC50 值为 17 μM,可用于对其他抗生素耐药的肺炎链球菌感染的研究。

生物实验数据

生物活性 Seconeolitsine, an antibiotic, is an inhibitor targeting topoisomerase I (TopA) and a novel antibacterial agent that inhibits the growth of S. pneumoniae, exhibiting TopA inhibitory activity with an IC50 value of 17 μM, and can be used for research on Streptococcus pneumoniae infections resistant to other antibiotics.
IC50 & Target Topoisomerase I:17 μM
体外研究
(In Vitro)

Seconeolitsine (compounds 17) inhibits TopA relaxation activity in a concentration-dependent manner, with an IC50 value of 17 μM and the inhibition of TopA is enhanced by preincubation of the enzyme with the alkaloid.
Seconeolitsine shows great inhibition of S.pneumoniae growth with MIC50 values of 16 μM for R6, ATCC6303, CipS8, CipS9, CipR20, CipR16, CipR8, CipR45 and CipR5. And shows great inhibition of S. pneumoniae growth with MIC50 values of 8 μM for CipR42, CipR68 and CipR15.
Seconeolitsine has activation at low concentrations and partial inhibition at 50 μM, a concentration at which the pneumococcal TopA showed full inhibition, but not inhibits Human TOPO1.
Seconeolitsine (0.25×-1×MIC) affects cell growth and division in a concentration-dependent manner.
Seconeolitsine (30 and 100 μM), is not affected neutrophil apoptosis and human cell viability.

体内研究
(In Vivo)

Seconeolitsine (compounds 17) increases supercoiling and TopA is target in vivo.

性状 固体
颜色 White to off-white

化学信息

分子量 323.34
分子式 C19H17NO4
CAS No. 2650074-56-7

储存&溶解度

储存方式

4°C, stored under nitrogen

*In solvent: -80°C, 6 months; -20°C, 1 month (stored under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (154.64 mM; 超声助溶 (<80°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.0927 mL15.4636 mL30.9272 mL77.3180 mL
5 mM0.6185 mL3.0927 mL6.1854 mL15.4636 mL
10 mM0.3093 mL1.5464 mL3.0927 mL7.7318 mL
15 mM0.2062 mL1.0309 mL2.0618 mL5.1545 mL
20 mM0.1546 mL0.7732 mL1.5464 mL3.8659 mL
25 mM0.1237 mL0.6185 mL1.2371 mL3.0927 mL
30 mM0.1031 mL0.5155 mL1.0309 mL2.5773 mL
40 mM0.0773 mL0.3866 mL0.7732 mL1.9329 mL
50 mM0.0619 mL0.3093 mL0.6185 mL1.5464 mL
60 mM0.0515 mL0.2577 mL0.5155 mL1.2886 mL
80 mM0.0387 mL0.1933 mL0.3866 mL0.9665 mL
100 mM0.0309 mL0.1546 mL0.3093 mL0.7732 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (stored under nitrogen)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础