MyD88-IN-3 是一种具有口服活性的选择性 MyD88 抑制剂,其特异性靶向 MyD88 的 TIR 结构域 (KD = 28.5 μM),阻止 MyD88 自聚合及其与 TLR 的相互作用,从而抑制 MAPK 和 NF-κB 通路的激活,表现出显著的抗炎效果,并有效缓解 CLP (盲肠结扎和穿刺) 和脂多糖 (MS-X54539) (LPS) 诱导的急性肺损伤 (ALI) 中的症状,可用于 ALI 的研究。
MyD88-IN-3
产品编号: MS-I34342 纯度: 99.33% 分子式: C24H24N6O5S 分子量: 508.55
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

MyD88-IN-3 是一种具有口服活性的选择性 MyD88 抑制剂,其特异性靶向 MyD88 的 TIR 结构域 (KD = 28.5 μM),阻止 MyD88 自聚合及其与 TLR 的相互作用,从而抑制 MAPK 和 NF-κB 通路的激活,表现出显著的抗炎效果,并有效缓解 CLP (盲肠结扎和穿刺) 和脂多糖 (MS-X54539) (LPS) 诱导的急性肺损伤 (ALI) 中的症状,可用于 ALI 的研究。

生物实验数据

生物活性 MyD88-IN-3 is an orally active selective MyD88 inhibitor that specifically targets the TIR domain of MyD88 (KD = 28.5 μM), thereby preventing MyD88 self-aggregation and its interaction with TLRs, which in turn inhibits the activation of the MAPK and NF-κB pathways; MyD88-IN-3 exhibits significant anti-inflammatory effects and effectively alleviates symptoms in CLP (cecal ligation and puncture) and lipopolysaccharide (MS-X54539) (LPS)-induced acute lung injury (ALI), and can be used for the study of ALI.
体外研究
(In Vitro)

MyD88-IN-3 (1.1-30 μM) 表现出强大的抗炎作用,显著抑制小鼠巨噬细胞 J774A.1 (IC50 = 1.32 μM) 和经 PMA 诱导分化而来的人巨噬细胞 THP-1 (IC50 = 0.75 μM) 中 IL-6 的分泌。
MyD88-IN-3 (10 μM,预处理 2 小时,然后与 0.5 μg/mL LPS 共同处理 30 分钟) 可恢复 J774A.1 巨噬细胞中 LPS 诱导的 IκBα 表达水平的降低,显着降低 p38 的磷酸化,抑制 JNK 的磷酸化,抑制 p65 的磷酸化和核易位,并抑制 LPS 诱导的 MAPK 通路激活,导致细胞中 c-Jun 的核易位。
MyD88-IN-3 (5 μM、10 μM) 可抑制 J774A.1 中 MyD88 的同源二聚化。
MyD88-IN-3 (10 μM,2 小时) 可抑制 J774A.1 中 M yD88 与 TLR4 的相互作用。
MyD88-IN-3 (10 μM,4 小时) 可提高 MyD88 的热稳定性,在64 ℃下可保留约 50% 的 MyD88。
MyD88-IN-3 可有效结合 TIR 结构域 (KD = 28.5 μM),而对 DD 结构域不表现出结合亲和力 (KD = 1.32 M)。

Western Blot Analysis

Cell Line: J774A.1 mouse macrophages
Concentration: Pretreatment for 2 h, followed by co-treatment with 0.5 μg/mL LPS for 30 minutes
Incubation Time: 2 h
Result: Restored LPS-induced IκBα degradation and inhibited p38 and JNK phosphorylation.
体内研究
(In Vivo)

MyD88-IN-3 (500 mg/kg,1000 mg/kg,灌胃,每日一次,连续 10 天) 在 SD 大鼠体内表现出良好的安全性。
MyD88-IN-3 (20 mg/kg,灌胃,预处理 6 小时) 可减轻 C57BL/6 小鼠脓毒症诱发的急性肺损伤。
MyD88-IN-3 (20 mg/kg,灌胃,预处理 30 分钟) 可减轻 C57BL/6 小鼠LPS诱发的急性肺损伤。

Animal Model: SD rats
Dosage: 500 mg/kg, 1000 mg/kg
Administration: Oral gavage, once daily for 10 days
Result: Induced a slight decrease in body weight in the first day, following which body weight progressively returned to levels akin to the control group, with no statistically significant differences noted.
Indicated no notable pathological alterations in the organs of mice.
Animal Model: Male C57BL/6 mice, weighing between 18 and 22 g, after the administration of anesthesia, an abdominal incision was performed to reveal the cecum. The cecum was ligated beneath the ileocecal valve with surgical thread and subsequently punctured once with a needle. The abdominal incision was subsequently sutured closed after repositioning
Dosage: 20 mg/kg
Administration: Oral gavage, administer 6 hours before CLP surgery
Result: Markedly diminished the lung wet/dry weight ratio, demonstrating its effectiveness in alleviating sepsis-induced lung edema.
Obstructed this cellular influx into BALF, suggesting that MyD88-IN-3 alleviates sepsis-induced pulmonary edema.
led to a significant decrease in IL-6.
Alleviated lung tissue damage, interstitial edema, pulmonary congestion, inflammatory infiltration, and thickened alveolar septa.
Significantly diminished immune cell infiltration, thereby mitigating the inflammatory response.
Animal Model: LPS-Induced Male C57BL/6 mice, weighing between 18 and 22 g
Dosage: 20 mg/kg
Administration: Oral gavage, administer 30 min before LPS.
Result: Markedly diminished the lung wet/dry weight ratio, demonstrating its effectiveness in alleviating sepsis-induced lung edema.
Significantly suppressed the increase in total protein concentration and the discharge of immune cells into BALF.
Decreased spleen weight and mitigated inflammation.
Markedly reduced IL-6 levels in both bronchoalveolar lavage fluid and serum samples.
Mitigated augmented alveolar septal thickness, pulmonary congestion, inflammatory infiltration, and lung tissue degradation.
Reduced leukocyte infiltration into the alveoli.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 508.55
分子式 C24H24N6O5S

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (196.64 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.9664 mL9.8319 mL19.6638 mL49.1594 mL
5 mM0.3933 mL1.9664 mL3.9328 mL9.8319 mL
10 mM0.1966 mL0.9832 mL1.9664 mL4.9159 mL
15 mM0.1311 mL0.6555 mL1.3109 mL3.2773 mL
20 mM0.0983 mL0.4916 mL0.9832 mL2.4580 mL
25 mM0.0787 mL0.3933 mL0.7866 mL1.9664 mL
30 mM0.0655 mL0.3277 mL0.6555 mL1.6386 mL
40 mM0.0492 mL0.2458 mL0.4916 mL1.2290 mL
50 mM0.0393 mL0.1966 mL0.3933 mL0.9832 mL
60 mM0.0328 mL0.1639 mL0.3277 mL0.8193 mL
80 mM0.0246 mL0.1229 mL0.2458 mL0.6145 mL
100 mM0.0197 mL0.0983 mL0.1966 mL0.4916 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础