PROTAC BET Degrader-17

PROTAC BET Degrader-17 是一种通过募集 VHL E3 连接酶特异性降解 BRD2、BRD3(DC50=0.09 nM)和 BRD4(IC50=4.3 nM)的高效 BET 蛋白 PROTAC 降解剂,在急性髓系白血病(AML)研究中展现出强效抗肿瘤活性,不仅能抑制癌细胞增殖、诱导细胞周期阻滞与凋亡(apoptosis),还在异种移植小鼠模型中有效抑制了肿瘤生长,可用于探索急性髓系白血病靶向疗法(粉色:BET 配体(MS-P48508);蓝色:VHL 配体(MS-L68940);黑色:连接子(MS-U93956))。
产品编号: MS-I24764 CAS No.: 2409674-38-8 分子式: C52H57F2N11O10S2 分子量: 1098.20
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PROTAC BET Degrader-17 是一种通过募集 VHL E3 连接酶特异性降解 BRD2、BRD3(DC50=0.09 nM)和 BRD4(IC50=4.3 nM)的高效 BET 蛋白 PROTAC 降解剂,在急性髓系白血病(AML)研究中展现出强效抗肿瘤活性,不仅能抑制癌细胞增殖、诱导细胞周期阻滞与凋亡(apoptosis),还在异种移植小鼠模型中有效抑制了肿瘤生长,可用于探索急性髓系白血病靶向疗法(粉色:BET 配体(MS-P48508);蓝色:VHL 配体(MS-L68940);黑色:连接子(MS-U93956))。

生物实验数据

生物活性 PROTAC BET Degrader-17 is a potent BET protein PROTAC degrader that specifically degrades BRD2, BRD3 (DC50=0.09 nM), and BRD4 (IC50=4.3 nM) by recruiting VHL E3 ligase, exhibits potent antitumor activity in acute myeloid leukemia (AML) research by not only inhibiting cancer cell proliferation and inducing cell cycle arrest and apoptosis but also effectively suppressing tumor growth in xenograft mouse models, and can be used to explore targeted therapies for acute myeloid leukemia (pink: BET ligand (MS-P48508); blue: VHL ligand (MS-L68940); black: linker (MS-U93956)).
IC50 & Target

VHL

 

BRD4

4.3 nM (IC50)

BRD3

0.09 nM (DC50)

BRD2

 

体外研究
(In Vitro)

PROTAC BET Degrader-17 (Compound A12) 抑制 MV4-11、RAMOS、K562 和 Jurkat 细胞增殖,IC50 (72 h) 分别为 0.570 nM、15.78 nM、57.23 nM、0.621 nM。
PROTAC BET Degrader-17 (0.1-300 nM; 15 min-24 h) 可在 MV4-11 细胞中以时间和剂量依赖的方式诱导 BRD2、BRD3、BRD4 降解,并下调 c-Myc。
PROTAC BET Degrader-17 (0.3-30 nM; 48 h) 可在 MV4-11 细胞中诱导剂量依赖性的 G1 期细胞周期阻滞。
PROTAC BET Degrader-17 (0.3-100 nM; 48 h) 可在 MV4-11 细胞中诱导剂量依赖性凋亡,在 10 nM 以下浓度时其效力优于 ABBV-075 (MS-X20474)。
PROTAC BET Degrader-17 在小鼠肝微粒体中具有优异的代谢稳定性,半衰期为 43.88 min,内在清除率为 31.59 mL/min/kg。

Cell Cycle Analysis

Cell Line: MV4-11 cells
Concentration: 0.3-30 nM
Incubation Time: 48 h
Result: Induced dose-dependent G1 phase cell cycle arrest; as the concentration of PROTAC BET Degrader-17 increased, the percentage of cells in G1 phase increased.

Apoptosis Analysis

Cell Line: MV4-11 cells
Concentration: 0.3-100 nM
Incubation Time: 48 h
Result: Induced dose-dependent apoptosis; at lower concentrations (<10 nM), PROTAC BET Degrader-17 was more potent at inducing apoptosis than ABBV-075, though it did not achieve the maximal apoptotic induction level of A10.
体内研究
(In Vivo)

PROTAC BET Degrader-17 (Compound A12) (2 mg/kg;腹腔注射;每两天一次;共 21 天) 可在 MV4-11 AML 异种移植模型中实现 60.5% 的肿瘤生长抑制率,且未出现显著的体重下降。

Animal Model: Balb/c nude mice (4 to 5 weeks old)
Dosage: 2 mg/kg
Administration: i.p.; every other day; 21 days
Result: Achieved 60.5% tumor growth inhibition (TGI) relative to vehicle control.
Downregulated BRD4 and c-Myc protein expression in tumor tissue compared to vehicle control.
Caused no significant body weight loss during the study.

化学信息

分子量 1098.20
分子式 C52H57F2N11O10S2
CAS No. 2409674-38-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础