Anti-MRSA agent 44

Anti-MRSA agent 44 是一种强效抗耐甲氧西林金黄色葡萄球菌 (MRSA) 剂,对 MRSA 具有抗生物膜活性,可在小鼠模型中降低细菌数量与生物膜负荷、加速伤口愈合并下调炎性细胞因子水平,可用于 MRSA 皮肤伤口感染及 MRSA 导管相关性生物膜感染的研究。
产品编号: MS-I22105 CAS No.: 3123310-71-1 分子式: C78H103Br2N17O26 分子量: 1854.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Anti-MRSA agent 44 是一种强效抗耐甲氧西林金黄色葡萄球菌 (MRSA) 剂,对 MRSA 具有抗生物膜活性,可在小鼠模型中降低细菌数量与生物膜负荷、加速伤口愈合并下调炎性细胞因子水平,可用于 MRSA 皮肤伤口感染及 MRSA 导管相关性生物膜感染的研究。

生物实验数据

生物活性 Anti-MRSA agent 44 is a potent anti-methicillin-resistant Staphylococcus aureus (MRSA) agent that exhibits anti-biofilm activity against MRSA, reduces bacterial counts and biofilm burden, accelerates wound healing, and downregulates inflammatory cytokine levels in mouse models, and can be used for research on MRSA skin wound infections and MRSA catheter-related biofilm infections.
体外研究
(In Vitro)

Anti-MRSA agent 44 (compound 1i) (16-18 h) 对多种 MRSA 表现出强效抑制活性,MIC 为 0.25-1 μg/mL。
Anti-MRSA agent 44 (16-128 μg/mL, 24 h) 在 HK-2 和 NIH3T3 细胞中无细胞毒性。
Anti-MRSA agent 44 (0.5-1 μg/mL) 以剂量依赖方式抑制 MRSA 48、52 和 936 的生物膜形成。
Anti-MRSA agent 44 (0.5-1 μg/mL) 可通过抑制 ica 操纵子直接干扰 PIA 的分泌,并抑制 agr 系统,RNAII、AIP-I、RNAIII 以及关键毒力因子 PSM α1 的显著下调可证明这一点。

Cell Cytotoxicity Assay

Cell Line: HK-2 and NIH3T3 cells
Concentration: 16; 32; 64; 128 μg/mL
Incubation Time: 24 h
Result: Showed no significant cytotoxicity in HK-2 and NIH3T3 cells, with viability > 80%.
体内研究
(In Vivo)

Anti-MRSA agent 44 (compound 1i) (0.25-1 mg/kg;感染后 1、24、48 小时局部创面给药) 在小鼠 MRSA 创面感染模型中展现出剂量依赖性的体内抗菌、抗炎及创面愈合活性。
Anti-MRSA agent 44 (compound 1i) (0.25-1 mg/kg;导管局部给药;植入后 1、24、48 h) 在小鼠体内对 MRSA 导管相关生物膜展现出强效的剂量依赖性活性,可抑制生物膜形成并清除预先形成的生物膜,同时还能减轻相关组织炎症。

Animal Model: BALB/c mice (male; full-thickness dorsal wounds infected with MRSA 48)
Dosage: 0.25; 1 mg/kg
Administration: local wound administration; at 1, 24, 48 h post-infection
Result: Reduced bacterial loads in skin tissue.
Significantly reduced levels of TNF-α, IL-6, and IL-1β at both doses.
Nearly fully healed wounds at 1 mg/kg dose on day 9 post-infection, outperforming the Daptomycin group.
Reduced inflammatory cell infiltration and tissue damage in treated mice compared to the model group.
Animal Model: BALB/c mice (male; catheter-associated biofilm infection with MRSA 48)
Dosage: 0.25; 1 mg/kg
Administration: local catheter administration; at 1, 24, 48 h post-implantation
Result: Reduced bacterial loads on catheters.
Demonstrated dose-dependent reduction in biofilm coverage on catheters.
Reduced inflammation and edema in peri-catheter tissues compared to the model group, with near-normal architecture in the 1 mg/kg dose group.

化学信息

分子量 1854.56
分子式 C78H103Br2N17O26
CAS No. 3123310-71-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础