CYD-2-11 是一种选择性 Bax 激动剂(Ki 值为 34.1 nM),可通过诱导细胞凋亡对 MDA-MB-231 和 MCF-7 乳腺癌细胞系产生抗增殖作用(IC50 值分别为 3.22 和 3.81 μM),在 MDA-MB-231 肿瘤模型中抑制肿瘤生长,并可用于乳腺癌和肺癌的研究。
产品编号: MS-I10580 CAS No.: 1425944-22-4 分子式: C22H18N2O3 分子量: 358.39
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
询价
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价

产品描述

CYD-2-11 是一种选择性 Bax 激动剂(Ki 值为 34.1 nM),可通过诱导细胞凋亡对 MDA-MB-231 和 MCF-7 乳腺癌细胞系产生抗增殖作用(IC50 值分别为 3.22 和 3.81 μM),在 MDA-MB-231 肿瘤模型中抑制肿瘤生长,并可用于乳腺癌和肺癌的研究。

生物实验数据

生物活性 CYD-2-11 is a selective Bax agonist (Ki = 34.1 nM) that induces apoptosis and exerts antiproliferative effects on MDA-MB-231 and MCF-7 breast cancer cell lines (IC50 = 3.22 and 3.81 μM, respectively), inhibits tumor growth in the MDA-MB-231 tumor model, and can be used for research on breast cancer and lung cancer.
体外研究
(In Vitro)

CYD-2-11 (0-100 μM; 48 h) shows anti-proliferation effects to breast cancer cells.
CYD-2-11 (5 μM; 48 h) selectively binds to Bax protein and induces apoptosis in NSCLC and SCLC cell lines.

Cell Proliferation Assay

Cell Line: T47D, MCF-7, MDA-MB-231, MDA-MB-468 and MCF-10A cell lines
Concentration: 0.01, 0.1, 1, 5, 10 and 100 µM
Incubation Time: 48 hours
Result: Inhibited cell proliferation of T47D, MCF-7, MDA-MB-231, MDA-MB-468 and MCF-10A cells with IC50 values of 4.37, 9.47, 3.81, 3.22 and 8.73 μM, respectively.

Apoptosis Analysis

Cell Line: SCLC and NSCLC cell lines
Concentration: 5 µM
Incubation Time: 48 hours
Result: Induced cell apoptosis in both SCLC and NSCLC cells with a higher effect than SMBA1.
体内研究
(In Vivo)

CYD-2-11 (20 mg/kg; i.p.; once daily for 7 days) inhibits tumor growth.
CYD-2-11 (40 mg/kg; i.p.; once daily for 14 days) represses lung cancer growth and overcomes rapalog resistance with the combination of RAD001 (1 mg/kg) in murine lung cancer models.

Animal Model: Female nude mice with MDA-MB-231 tumor xenografts
Dosage: 20 mg/kg
Administration: Intraperitoneal injection; 20 mg/kg; once daily for 7 days
Result: Exhibited a 57% inhibition rate of MDA-MB-231 tumor growth in vivo.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 358.39
分子式 C22H18N2O3
CAS No. 1425944-22-4

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (139.51 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.7903 mL13.9513 mL27.9026 mL69.7564 mL
5 mM0.5581 mL2.7903 mL5.5805 mL13.9513 mL
10 mM0.2790 mL1.3951 mL2.7903 mL6.9756 mL
15 mM0.1860 mL0.9301 mL1.8602 mL4.6504 mL
20 mM0.1395 mL0.6976 mL1.3951 mL3.4878 mL
25 mM0.1116 mL0.5581 mL1.1161 mL2.7903 mL
30 mM0.0930 mL0.4650 mL0.9301 mL2.3252 mL
40 mM0.0698 mL0.3488 mL0.6976 mL1.7439 mL
50 mM0.0558 mL0.2790 mL0.5581 mL1.3951 mL
60 mM0.0465 mL0.2325 mL0.4650 mL1.1626 mL
80 mM0.0349 mL0.1744 mL0.3488 mL0.8720 mL
100 mM0.0279 mL0.1395 mL0.2790 mL0.6976 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础