NLRP3-IN-75 是一种口服有效的 NLRP3 抑制剂,可抑制 IL-1β 的分泌 (IC50 = 23 nM),并通过破坏炎症小体的组装选择性抑制 NLRP3 活化,而不影响 NLRC4 或 AIM2 炎症小体的组装,在急性腹膜炎、糖尿病肾病和炎症性肠病 (IBD) 等模型中表现出优异的抗炎效果。
NLRP3-IN-75
产品编号: MS-I09380 分子式: C20H30N4O3S 分子量: 406.54
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

NLRP3-IN-75 是一种口服有效的 NLRP3 抑制剂,可抑制 IL-1β 的分泌 (IC50 = 23 nM),并通过破坏炎症小体的组装选择性抑制 NLRP3 活化,而不影响 NLRC4 或 AIM2 炎症小体的组装,在急性腹膜炎、糖尿病肾病和炎症性肠病 (IBD) 等模型中表现出优异的抗炎效果。

生物实验数据

生物活性 NLRP3-IN-75 is an orally active NLRP3 inhibitor that inhibits IL-1β secretion (IC50 = 23 nM) and selectively suppresses NLRP3 activation by disrupting inflammasome assembly without affecting NLRC4 or AIM2 inflammasome assembly, demonstrating excellent anti-inflammatory effects in models such as acute peritonitis, diabetic nephropathy, and inflammatory bowel disease (IBD).
IC50 & Target

IL-1β

23 nM (IC50)

体外研究
(In Vitro)

NLRP3-IN-75 (Compound 15) (0.03-100 μM,30 分钟) 显著抑制 LPS 和 ATP 诱导的 BMDM 细胞 (IC50 = 0.106 μM) 和 THP-1 细胞 (IC50 = 23 nM) 中 IL-1β 的释放。
NLRP3-IN-75 (10 μM,4 小时) 通过在鞭毛蛋白转染的 BMDM 细胞中维持 NLRC4 或 AIM2 炎症小体通路中的 IL-1β 分泌,显示出对 NLRP3 炎症小体的选择性。
NLRP3-IN-75 (10 μM,4 小时) 不会影响 NLRP3 炎症激活的起始阶段,因为不会影响 TNF-α 和 IL-6 的产生。
NLRP3-IN-75 (10 μM,4 小时) 通过阻碍 NLRP3 炎症小体的组装,阻断 BMDM 细胞中 LPS 和 ATP 诱导的 NLRP3 与 ASC 之间的相互作用。

体内研究
(In Vivo)

NLRP3-IN-75 (20 mg/kg,口服,单次给药) 可改善小鼠模型中 LPS 和 ATP 诱导的急性腹膜炎。
NLRP3-IN-75 (20 mg/kg,口服,6周) 通过靶向 NLRP3 炎症小体,减轻小鼠 HFD 和 STZ 诱导的 DKD。
NLRP3-IN-75 (0.2-5 mg/kg,口服,10 天) 可改善小鼠模型中 DSS (MS-A45736) 诱发的炎症性肠病。
NLRP3-IN-75 (20 mg/kg,口服,单次给药) 对小鼠心血管或肺部毒性较低。

Animal Model: LPS (MS-X54539) (15 mg/kg, i.p.)- and ATP (1 mM/kg, i.p.)-induced acute peritonitis mice (6-8 weeks old, male C57BL/6J)
Dosage: 1 mg/kg, 20 mg/kg
Administration: Oral gavage (p.o.)
Result: Achieved 100% survival rate in LPS-induced followed by ATP-induced acute peritonitis mice models.
Suppressed serum IL-1β level in peritonitis mice models 12 h post-ATP administration, and presented better effect with increasing dose.
Animal Model: Male C57BL/6J HFD (4 weeks)- and STZ (MS-Q80520) (50 mg/kg, i.p., 5 days)-induced diabetic kidney disease (DKD) mice (n = 5-6, 20-22 g)
Dosage: 20 mg/kg, 6 weeks
Administration: Oral gavage (p.o.), 6 weeks; administered after STZ and HFD feeding
Result: Significantly reduced the elevated urine albumin-to-creatinine ratio (UACR) caused by the HFD- and STZ-induced DKD mice models.
Ameliorated the thickening of the glomerular and tubular basement membranes in DKD models.
Decreased inflammatory cytokine IL-1β but no effect on TNF-α level.
Reduced macrophage infiltration.
Disrupted the NLRP3-ASC interaction.
Reduced LDL-C levels without affecting HDL-C levels.
Animal Model: 2% (w/v) DSS (MS-A45736) (7 days) in distilled water-induced colitis mice (Male C57BL/6J, n = 5-10, 20-22 g)
Dosage: 0.2 or 5 mg/kg
Administration: Oral gavage (p.o.), 9 days (day 1-day 10)
Result: Attenuated weight loss in DSS-induced acute colitis mice models.
Reduced fecal bleeding and decreased disease activity index (DAI) scores.
Ameliorated pathological features such as disruption of mucosal barrier, crypt necrosis, substantial depletion of the mucosal barrier, crypt necrosis, substantial depletion of goblet cells, and pronounced infiltration of inflammatory cells.
Inhibited colonic IL-1β without affecting TNF-α level.

化学信息

分子量 406.54
分子式 C20H30N4O3S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础