Ufenamate

Synonyms: 氟芬那酸丁酯; Flufenamic acid butyl ester; Butyl flufenamate
Ufenamate(Flufenamic acid butyl ester)是一种基于邻氨基苯甲酸的抗炎试剂,可用于急慢性湿疹、接触性皮炎、尿布性皮炎、粟疹和特应性皮炎等皮肤疾病的研究,并具有一定的光保护作用,在光老化模型中可减轻皮肤红斑肿胀程度、下调 COX-2 表达水平,还能通过分泌 BMP2 促进小鼠颅骨缺损愈合。
产品编号: MS-H95945 纯度: 99.89% CAS No.: 67330-25-0 分子式: C18H18F3NO2 分子量: 337.34
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
500mg
询价
3-5 天
1g
询价
3-5 天
5g
询价
询价
10g
询价
询价

产品描述

Ufenamate(Flufenamic acid butyl ester)是一种基于邻氨基苯甲酸的抗炎试剂,可用于急慢性湿疹、接触性皮炎、尿布性皮炎、粟疹和特应性皮炎等皮肤疾病的研究,并具有一定的光保护作用,在光老化模型中可减轻皮肤红斑肿胀程度、下调 COX-2 表达水平,还能通过分泌 BMP2 促进小鼠颅骨缺损愈合。

生物实验数据

生物活性 Ufenamate (Flufenamic acid butyl ester) is an anthranilic acid-based anti-inflammatory agent used in research on skin diseases such as acute and chronic eczema, contact dermatitis, diaper dermatitis, miliaria, and atopic dermatitis, and it also exerts certain photoprotective effects by alleviating the degree of skin erythema and swelling, downregulating COX-2 expression levels in photoaging models, and promoting mouse calvarial defect healing through BMP2 secretion.
IC50 & Target

COX-2

 

体内研究
(In Vivo)

Ufenamat (2 µL/cm2,软膏涂抹,单次剂量) 在大鼠中不适合干性皮肤。
Ufenamate (软膏涂抹,单次剂量) 具有一定的光保护作用, 在小鼠光老化模型中减轻皮肤红斑肿胀程度,下调 COX-2 表达水平。
Ufenamat (软膏涂抹,6 和 8 周) 促进小鼠颅骨损伤愈合。

Animal Model: UV-induced acute sunburn model, photoaging model and skin squamous cell carcinoma model in SKH-1 hairless mice
Dosage: Ointment application
Administration: Ointment application; single dose; 30 min
Result: Inhibited acute swelling and redness caused by UV irradiation and reduced COX-2 expression.
At 12 weeks of irradiation, skin aging was alleviated, the collagen density of the dermis was higher, the expression of Bcl-2 was weakened, and the expression of Bax and Caspase 3 was enhanced.
At 28 weeks of irradiation, the appearance of tumors was delayed.
Animal Model: Intact and damaged skin of rats
Dosage: 2µL/cm2
Administration: Ointment application; single dose
Result: Applied on the damaged skin, contained in the epidermis was approximately 50% and 25% of that in the intact skin after LP and water, respectively, with the content being 5 times and 10 times higher than in the intact skin.
Permeated UF five times more than LP in the intact skin. Reduced significantly the permeation of UF by both LP and water due to the defatting effect of SC.
Animal Model: Skull defect mice
Dosage: Ointment application
Administration: Ointment application; 6 weeks and 8 weeks
Result: Promoted the formation of new bone in the defect area, and the effect was stronger after 8 weeks than at 6 weeks, improving the BV/TV and BMD in the defect area.
性状 液体(密度:1.2230 g/cm3)
颜色 Colorless to light yellow

化学信息

分子量 337.34
分子式 C18H18F3NO2
CAS No. 67330-25-0
别名 氟芬那酸丁酯; Flufenamic acid butyl ester; Butyl flufenamate

储存&溶解度

储存方式
Pure form -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 44 mg/mL (130.43 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.9644 mL14.8218 mL29.6437 mL74.1092 mL
5 mM0.5929 mL2.9644 mL5.9287 mL14.8218 mL
10 mM0.2964 mL1.4822 mL2.9644 mL7.4109 mL
15 mM0.1976 mL0.9881 mL1.9762 mL4.9406 mL
20 mM0.1482 mL0.7411 mL1.4822 mL3.7055 mL
25 mM0.1186 mL0.5929 mL1.1857 mL2.9644 mL
30 mM0.0988 mL0.4941 mL0.9881 mL2.4703 mL
40 mM0.0741 mL0.3705 mL0.7411 mL1.8527 mL
50 mM0.0593 mL0.2964 mL0.5929 mL1.4822 mL
60 mM0.0494 mL0.2470 mL0.4941 mL1.2352 mL
80 mM0.0371 mL0.1853 mL0.3705 mL0.9264 mL
100 mM0.0296 mL0.1482 mL0.2964 mL0.7411 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础