FLT3-IN-36 是一种强效的 FLT3 抑制剂,对 FLT3 突变的急性髓系白血病 (AML) 细胞具有抗肿瘤活性,可通过诱导细胞周期阻滞、降低线粒体膜电位 (mitochondrial membrane potential) 并诱导细胞凋亡 (apoptosis),下调 FLT3 及其下游蛋白 (包括 AKT、ERK、PI3K 和 STAT5) 的表达,可用于 AML 研究。
FLT3-IN-36
产品编号: MS-H92378 分子式: C21H17NO3 分子量: 331.36
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

FLT3-IN-36 是一种强效的 FLT3 抑制剂,对 FLT3 突变的急性髓系白血病 (AML) 细胞具有抗肿瘤活性,可通过诱导细胞周期阻滞、降低线粒体膜电位 (mitochondrial membrane potential) 并诱导细胞凋亡 (apoptosis),下调 FLT3 及其下游蛋白 (包括 AKT、ERK、PI3K 和 STAT5) 的表达,可用于 AML 研究。

生物实验数据

生物活性 FLT3-IN-36 is a potent FLT3 inhibitor that exhibits antitumor activity against FLT3-mutant acute myeloid leukemia (AML) cells by inducing cell cycle arrest, reducing mitochondrial membrane potential, and inducing apoptosis, thereby downregulating the expression of FLT3 and its downstream proteins (including AKT, ERK, PI3K, and STAT5), and can be used for AML research.
体外研究
(In Vitro)

FLT3-IN-36 (compound 8h) (24 小时) 对 FLT3 突变型 AML 细胞表现出选择性抗增殖活性,IC50 值分别为 2.04 μM (MV4-11) 和 3.25 μM (MOLM-13),而对 FLT3 野生型细胞 (如 THP-1、U937 和 OCI-AML2) 的抑制作用则显著较弱 (IC50 值分别为 19.59 μM、91.49 μM 和 55.38 μM)。
FLT3-IN-36 (0.1-100 μM,24 小时) 以时间和剂量依赖的方式抑制 MV4-11 细胞的生长,同时对正常 HK-2 和 HepRG 细胞的细胞毒性较低。
FLT3-IN-36 (1-10 μM,24 小时) 以剂量依赖的方式诱导 MV4-11 细胞凋亡、G2/M 期细胞周期阻滞并降低线粒体膜电位。
FLT3-IN-36 (0-10 μM,24 小时) 通过下调 FLT3 蛋白水平并抑制其下游信号通路 (包括 AKT、ERK、PI3K 和 STAT5 等关键效应分子) 来抑制 MV4-11 细胞的生长。
FLT3-IN-36 与 FLT3 的 ATP 结合口袋结合良好,并且仅与活性构象铰链区的 Glu692 和 Cys694 残基相互作用。
FLT3-IN-36 (1-10 μM) 直接靶向 FLT3 激酶,在 10 μM 时对 FLT3-ITD 激酶活性表现出 58% 的抑制作用。

Cell Cycle Analysis

Cell Line: MV4-11 cells
Concentration: 1, 2.5 and 5 μM
Incubation Time: 24 h
Result: Significantly increased the G2/M phase arrest in MV4-11.
Induced the G2/M phase arrest at moderate concentration with a dose-dependent manner after treatment for 24 h.

Cell Viability Assay

Cell Line: MV4-11, HK-2 and HepRG cells
Concentration: 0.1, 1, 2, 4, 8, 10, 16, 50, and 100 μM
Incubation Time: 24 and 48 h
Result: Decreased MV4-11 cell viability in a time- and dose-dependent manner.
Showed low cytotoxicity in normal HK-2 and HepRG cells.

Western Blot Analysis

Cell Line: MV4-11 cells
Concentration: 0, 2.5, 5, and 10 μM
Incubation Time: 24 h
Result: Promoted the cleavage and activation of Caspase-3 (evidenced by increased levels of cleaved Caspase-3).
Resulted in no obvious changes for the levels of Bcl-2 and Bax.
Caused the decrease of the downstream-related protein levels, including AKT, ERK, PI3K and STAT5.

Apoptosis Analysis

Cell Line: MV4-11 cells
Concentration: 1, 2.5 and 5 μM
Incubation Time: 24 h
Result: Induced apoptosis in MV4-11 cells with a dose-dependent manner.

化学信息

分子量 331.36
分子式 C21H17NO3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础