| 生物活性 | Ramelteon metabolite M-II is the major metabolite of Ramelteon, with IC50 values of 208 pM and 1470 pM for human melatonin receptors 1 and 2, respectively, while Ramelteon is a selective agonist of melatonin receptors. |
| 体外研究 (In Vitro) |
The affinity of Ramelteon metabolite M-II (M-II) for MT1 receptors is 10- and 2.5-fold lower than that of ramelteon and melatonin, respectively. Likewise, the affinity of M-II for MT2 receptors is approximately 5- and 1.5-fold lower than that of ramelteon and melatonin, respectively. Ramelteon metabolite M-II exhibits no affinity for quinone reductase 2 at concentrations up to 10 μM. Moreover, the selectivity of Ramelteon metabolite M-II for melatonin receptors relative to 215 targets including other receptors, transporters, ion channels and enzymes is investigated. Ramelteon metabolite M-II shows no significant affinities and activities for the other targets, except for the 5-HT2B receptor, for which the Ki value was 1.75±0.23 μM. The potency of Ramelteon metabolite M-II for MT1 receptors is approximately 17- and 4.3-fold lower than that of ramelteon and melatonin, respectively. Similarly, the potency of Ramelteon metabolite M-II for MT2 receptors is approximately 28- and 1.6-fold lower than that of ramelteon and melatonin, respectively. |
| 体内研究 (In Vivo) |
Ramelteon metabolite M-II (1 mg/kg) significantly increases NREM sleep (F1,7=96.3, p<0.01) and significantly decreases wakefulness (F1,7=56.7, p<0.01). Moreover, a lower dose of M-II (0.1 mg/kg) yield similar results (NREM, F1,7=121.9, p<0.01; wakefulness, F1,7=87.0, p<0.01), and decreased wakefulness is sustained for 6 h after the administration of either dose. After the administration of 0.01 mg/kg Ramelteon metabolite M-II, only NREM sleep is significantly increased (F1,7=10.5, p< 0.05). No significant differences in REM sleep are observed after the administration of M-II at any of the doses tested in this study. |
| 性状 | 固体 |
| 颜色 | White to off-white |
| 分子量 | 275.34 |
| 分子式 | C16H21NO3 |
| CAS No. | 896736-21-3 |
| 储存方式 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 100 mg/mL (363.19 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
体内配方配制方法:取 μL DMSO母液,加入 μL Corn oil,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
© 2026 MolStrong. 保留所有权利。粤ICP备2023004355号
可通过CAS号进行批量搜索,一行一个CAS号