AC-45594

Synonyms: 对己氧基苯酚; 4-(Hexyloxy)phenol
AC-45594 (4-(Hexyloxy)phenol) 是一种 UPR 激活剂,可诱导内质网应激、激活未折叠蛋白反应 (UPR),并驱动从适应性应激信号向终末应激信号转变,最终导致细胞凋亡 (Apoptosis),同时激活 Caspase-3、诱导 PARP 裂解并升高 DR5 蛋白水平,从而选择性地抑制尤文肉瘤细胞的生长。
产品编号: MS-H60329 纯度: 99.94% CAS No.: 18979-55-0 分子式: C12H18O2 分子量: 194.27
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5g
询价
3-5 天
25g
询价
3-5 天
50g
询价
询价

产品描述

AC-45594 (4-(Hexyloxy)phenol) 是一种 UPR 激活剂,可诱导内质网应激、激活未折叠蛋白反应 (UPR),并驱动从适应性应激信号向终末应激信号转变,最终导致细胞凋亡 (Apoptosis),同时激活 Caspase-3、诱导 PARP 裂解并升高 DR5 蛋白水平,从而选择性地抑制尤文肉瘤细胞的生长。

生物实验数据

生物活性 AC-45594 (4-(Hexyloxy)phenol) is a UPR activator that induces endoplasmic reticulum stress, activates the unfolded protein response (UPR), and drives the transition from adaptive stress signaling to terminal stress signaling, ultimately leading to apoptosis, while activating Caspase-3, inducing PARP cleavage, and elevating DR5 protein levels, thereby selectively inhibiting the growth of Ewing sarcoma cells.
IC50 & Target

Caspase 3

 

Caspase 8

 

Caspase-7

 

体外研究
(In Vitro)

AC-45594 (72 h) 以浓度依赖的方式选择性抑制 COG-E-352、SK-ES-1、TC-32、SKNMC、TC-71 和 TC-106 尤因肉瘤细胞系的生长,其 EC50 值范围为 45.0 ± 2.2 至 144.3 ± 13.0 nM。
AC-45594 (25-200 nM; 72 h) 可诱导 SK-ES-1 和 TC-71 尤因肉瘤细胞系发生细胞凋亡,同时会减少 S 期和 G2/M 期的细胞群体。
AC-45594 (200 nM; 8-16 h) 可在 SK-ES-1 尤文肉瘤细胞中触发未折叠蛋白反应与促凋亡信号的序贯激活,处理 8 h 时出现早期应激反应变化,处理 16 h 时则出现广泛的 UPR 激活与凋亡启动。

Cell Cycle Analysis

Cell Line: Ewing sarcoma cell lines (SK-ES-1, TC-71)
Concentration: 25, 50, 100 nM
Incubation Time: 72 h
Result: Did not alter cell cycle distribution in SK-ES-1 or TC-71 cells at 50 nM (below EC50 values for both cell lines).
Significantly reduced the proportion of SK-ES-1 cells in S (12.97 ± 0.32% vs 21.83 ± 0.49% in control) and G2/M (20.27 ± 0.03% vs 22.57 ± 0.15% in control) phases, and increased apoptotic cells to 4.70 ± 0.12% at 100 nM.
Reduced the proportion of TC-71 cells in S (12.97 ± 0.32% vs 20.60 ± 0.90% in control) and G2/M (16.20 ± 0.38% vs 25.47 ± 0.27% in control) phases, and increased apoptotic cells to 20.23 ± 0.20% at 100 nM.

Western Blot Analysis

Cell Line: Ewing sarcoma cell lines (SK-ES-1, TC-71)
Concentration: 100, 200, 300 nM (72 h); 200 nM (8, 16, 24, 48 h)
Incubation Time: 8, 16, 24, 48, 72 h
Result: Activated caspase-3 and induced PARP cleavage in TC-71 and SK-ES-1 cells at 100 nM or higher.
Activated caspase-3, -7, and -8, induced PARP cleavage, and increased DR5 protein levels as early as 8 hours in both cell lines at 200 nM.

性状 固体
颜色 Off-white to yellow

化学信息

分子量 194.27
分子式 C12H18O2
CAS No. 18979-55-0
别名 对己氧基苯酚; 4-(Hexyloxy)phenol

储存&溶解度

储存方式

RT, stored under nitrogen

In solvent -80°C 1 year
-20°C 6 months
运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础