EGFR-IN-185 是一种 EGFR 抑制剂,对携带 EGFR 突变的非小细胞肺癌 (NSCLC) 细胞具有显著抑制活性,可抑制克隆形成和迁移、诱导 G0/G1 期细胞阻滞并促进细胞凋亡 (apoptosis),这些作用均与 EGFR 和 AKT 磷酸化的抑制有关,因此可用于 NSCLC 研究。
EGFR-IN-185
产品编号: MS-H52563 分子式: C30H28FN3O2 分子量: 481.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

EGFR-IN-185 是一种 EGFR 抑制剂,对携带 EGFR 突变的非小细胞肺癌 (NSCLC) 细胞具有显著抑制活性,可抑制克隆形成和迁移、诱导 G0/G1 期细胞阻滞并促进细胞凋亡 (apoptosis),这些作用均与 EGFR 和 AKT 磷酸化的抑制有关,因此可用于 NSCLC 研究。

生物实验数据

生物活性 EGFR-IN-185 is an EGFR inhibitor that exhibits significant inhibitory activity against non-small cell lung cancer (NSCLC) cells harboring EGFR mutations; it inhibits colony formation and migration, induces G0/G1 phase cell cycle arrest, and promotes apoptosis, all of which are associated with the inhibition of EGFR and AKT phosphorylation, making it applicable for NSCLC research.
体外研究
(In Vitro)

EGFR-IN-185 (compound 33) (48 小时) 对 NSCLC 细胞表现出抗增殖活性,IC50 分别为 3.1 (HCC827)、5.2 (H1975)、2.7 (H1975TM) 和 10.2 μM (A549)。
EGFR-IN-185 (1-9 μM; 48 h) 以浓度依赖的方式将 H1975TM 细胞的细胞周期进程阻滞在 G0/G1 期。
EGFR-IN-185 (0-10 μM;24 小时) 以浓度依赖对方式抑制 H1975TM 细胞的迁移。
EGFR-IN-185 对 EGFRWT、EGFR19del、EGFRL858R/T790M 以及 EGFRL858R/T790M/C797S 均显示出可忽略不计的抑制活性,其 IC50 值分别为约 100、20、4 和 44 μM,这表明它并不作为变构 EGFR 酪氨酸激酶抑制剂起作用。
EGFR-IN-185 (2-10 μM, 20 小时) 对 H1975TM 细胞表现出强烈的抗增殖效应,并能抑制 EGFR 信号通路,这一点通过 EGFR 和 AKT 磷酸化水平的降低得到证实。
EGFR-IN-185 (0-9 μM, 10 天) 以浓度依赖的方式抑制了 H1975TM 细胞的集落形成。
EGFR-IN-185 (2-8 μM, 32 小时) 通过浓度依赖性方式诱导细胞凋亡,从而抑制 H1975TM 细胞的生长。

Cell Cycle Analysis

Cell Line: H1975™
Concentration: 1, 3, 6, and 9 μM
Incubation Time: 48 h
Result: Increased the percentage of H1975™ cells in the G0/G1 phase and decreased the S and G2/M phases. Increased the G0/G1 phase at 9 μM from 30.8% (control) to 59.7%, while it decreased S and G2/M phases from 50.3% and 18.9% to 31.1% and 9.3%, respectively.

Cell Migration Assay

Cell Line: H1975™
Concentration: 0, 2, 4, 6, 10 μM
Incubation Time: 0, 12, and 24 h
Result: Inhibited H1975™ cell migration in a concentration-dependent manner. Exhibited only 12% and 22% wound closure at 10 μM after 12 and 24 h.

Western Blot Analysis

Cell Line: H1975™
Concentration: 2, 6, and 10 μM
Incubation Time: 20 h
Result: Suppressed the phosphorylation of EGFR and its downstream proteins Akt in H1975™ cells in a concentration dependent manner. Significantly decreased the expression of p-EGFR by 59% and p-Akt by 57% at 10 μM. Did not target the downstream PI3Kα and AKT1 kinases of the EGFR pathway.

Cell Proliferation Assay

Cell Line: H1975™
Concentration: 0, 1, 2, 4, 6, and 9 μM
Incubation Time: 10 days
Result: Inhibited colony formation of H1975™ cells in a concentration dependent manner. Exhibited a good inhibitory effect on the colony formation of H1975™ cells at concentrations above its IC₅₀ value (2.66 µM). Showed almost no colony formation at 9 μM.

Apoptosis Analysis

Cell Line: H1975™
Concentration: 2, 6, and 8 μM
Incubation Time: 32
Result: Induced apoptosis in H1975™ cells in a concentration-dependent manner, increasing both early and late apoptotic populations. Increased the early and late apoptosis states at 8 μM from 1.11% and 2.51% (control) to 18.26% and 55.05%, respectively.

化学信息

分子量 481.56
分子式 C30H28FN3O2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础