PI3K/Akt/mTOR-IN-2

PI3K/Akt/mTOR-IN-2 是一种有效的 PI3K/AKT/mTOR 抑制剂,具有抗癌作用,对 MDA-MB-231 细胞具有选择性(IC50 为 2.29 μM),并可诱导癌细胞周期阻滞和细胞凋亡 (apoptosis)。
产品编号: MS-H46985 纯度: 99.93% CAS No.: 2757804-89-8 分子式: C17H13F2NO 分子量: 285.29
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
询价
500mg
询价
询价
1g
询价
询价
5g
询价
询价
(0.1 - 0.2mg)
询价
询价

产品描述

PI3K/Akt/mTOR-IN-2 是一种有效的 PI3K/AKT/mTOR 抑制剂,具有抗癌作用,对 MDA-MB-231 细胞具有选择性(IC50 为 2.29 μM),并可诱导癌细胞周期阻滞和细胞凋亡 (apoptosis)。

生物实验数据

生物活性 PI3K/Akt/mTOR-IN-2 is a potent PI3K/AKT/mTOR inhibitor that exhibits anticancer activity with selectivity against MDA-MB-231 cells (IC50 = 2.29 μM) and induces cell cycle arrest and apoptosis in cancer cells.
IC50 & Target PI3K/AKT/mTOR:2.29 μM
体外研究
(In Vitro)

PI3K/Akt/mTOR-IN-2 (compound 23) (0.5 - 100 μM; 72 hours) exhibits effective anti-cancer activity with IC50s of 2.29 - 24.63 μM, of which, IC50 in MDA-MB-231 is 2.29 μM.
PI3K/Akt/mTOR-IN-2 (1 μM, 2 μM and 4 μM; 24 hours) induces growth inhibition of MDA-MB-231 cells by cell cycle arrest at G0/G1.
PI3K/Akt/mTOR-IN-2 (1 μM, 2 μM and 4 μM; 24, 48 and 72 hours) induces apoptosis in MDA-MB-231 cells with both dose- and time-dependent manners.
PI3K/Akt/mTOR-IN-2 (1 μM, 2 μM and 4 μM; 48 hours) increases the expression of Bax, and decreases the expression of Bcl-2 in MDA-MB-231 cells.
PI3K/Akt/mTOR-IN-2 (1 μM, 2 μM and 4 μM; 24 hours) induces mitochondria-dependent apoptosis in MDA-MB-231 cells through disruption of MMP, accumulation of ROS, depletion of GSH and elevation of intracellular Ca2+.

Cell Proliferation Assay

Cell Line: PC3, BGC-823, A549, MCF-7, MDA-MB-231 cells and MCF-10A cells
Concentration: 0.5 - 100 μM
Incubation Time: 72 hours
Result: Exhibited effective anti-cancer activity with IC50s of 2.29 - 24.63 μM, of which, IC50 in MDA-MB-231 was 2.29 μM.

Cell Cycle Analysis

Cell Line: MDA-MB-231
Concentration: 1 μM, 2 μM and 4 μM
Incubation Time: 24 hours
Result: Induced growth inhibition of MDA-MB-231 cells by cell cycle arrest at G0/G1.

Apoptosis Analysis

Cell Line: MDA-MB-231
Concentration: 1 μM, 2 μM and 4 μM
Incubation Time: 24, 48 and 72 hours
Result: Induced apoptosis in MDA-MB-231 cells with both dose- and time-dependent manners.

Western Blot Analysis

Cell Line: MDA-MB-231
Concentration: 1 μM, 2 μM and 4 μM
Incubation Time: 48 hours
Result: Increased the expression of Bax, and decreased the expression of Bcl-2
性状 固体
颜色 White to off-white

化学信息

分子量 285.29
分子式 C17H13F2NO
CAS No. 2757804-89-8

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 100 mg/mL (350.52 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.5052 mL17.5260 mL35.0521 mL87.6301 mL
5 mM0.7010 mL3.5052 mL7.0104 mL17.5260 mL
10 mM0.3505 mL1.7526 mL3.5052 mL8.7630 mL
15 mM0.2337 mL1.1684 mL2.3368 mL5.8420 mL
20 mM0.1753 mL0.8763 mL1.7526 mL4.3815 mL
25 mM0.1402 mL0.7010 mL1.4021 mL3.5052 mL
30 mM0.1168 mL0.5842 mL1.1684 mL2.9210 mL
40 mM0.0876 mL0.4382 mL0.8763 mL2.1908 mL
50 mM0.0701 mL0.3505 mL0.7010 mL1.7526 mL
60 mM0.0584 mL0.2921 mL0.5842 mL1.4605 mL
80 mM0.0438 mL0.2191 mL0.4382 mL1.0954 mL
100 mM0.0351 mL0.1753 mL0.3505 mL0.8763 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础