PARP1-IN-49 是一种选择性 PARP1 抑制剂,IC50 值为 23.56 nM,Kd 为 17.78 nM,对 PARP1 的选择性高于 PARP2,可通过抑制 PARP1 导致 DNA 损伤、细胞周期阻滞和凋亡 (apoptosis) 诱导,还可增加细胞内活性氧 (ROS) 水平并抑制细胞迁移,可用于乳腺癌和卵巢癌的研究。
PARP1-IN-49
产品编号: MS-H46185 分子式: C15H11FN2O3 分子量: 286.26
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PARP1-IN-49 是一种选择性 PARP1 抑制剂,IC50 值为 23.56 nM,Kd 为 17.78 nM,对 PARP1 的选择性高于 PARP2,可通过抑制 PARP1 导致 DNA 损伤、细胞周期阻滞和凋亡 (apoptosis) 诱导,还可增加细胞内活性氧 (ROS) 水平并抑制细胞迁移,可用于乳腺癌和卵巢癌的研究。

生物实验数据

生物活性 PARP1-IN-49 is a selective PARP1 inhibitor with an IC50 of 23.56 nM and a Kd of 17.78 nM that exhibits greater selectivity for PARP1 over PARP2, induces DNA damage, cell cycle arrest, and apoptosis (apoptosis) by inhibiting PARP1, increases intracellular reactive oxygen species (ROS) levels, inhibits cell migration, and can be used for research on breast cancer and ovarian cancer.
IC50 & Target

PARP1

23.56 nM (IC50)

PARP1

17.78 nM (Kd)

PARP2

285.39 nM (IC50)

体外研究
(In Vitro)

PARP1-IN-49 (compound 9a) (0.5-2 μM; 48 h) 抑制 MDA-MB-231 细胞增殖和迁移。
PARP1-IN-49 (0.5-2 μM; 48 h) 增加了 MDA-MB-231 细胞中与凋亡相关的蛋白质表达,并降低了 Bcl-2 的水平。
PARP1-IN-49 (0.5-2 μM; 48 h) 诱导 MDA-MB-231 细胞中 DNA 损伤和双链断裂。
PARP1-IN-49 (0.5-2 μM;48 小时) 增加 MDA-MB-231 细胞凋亡并导致 S 期细胞周期阻滞。
PARP1-IN-49 (0.5-4 μM;48 小时) 在 MDA-MB-231 细胞中通过诱导 ROS 生成和改变线粒体膜电位诱导细胞凋亡。
PARP1-IN-49 (2 μM;48 小时) 提高 PARP1 的热稳定性,表明直接相互作用。

Cell Proliferation Assay

Cell Line: MDA-MB-231 cells
Concentration: 0.5 μM, 1 μM, 2 μM
Incubation Time: 48 h
Result: Inhibited cell proliferation and migration in a dose-dependent manner.

Western Blot Analysis

Cell Line: MDA-MB-231 cells
Concentration: 0.5 μM, 1 μM, 2 μM
Incubation Time: 48 h
Result: Induced apoptosis in a dose-dependent manner, increasing the expression of apoptosis-related proteins, such as Cleaved PARP, Cleaved caspase3 and Bax, and decreasing Bcl-2 protein levels.

Immunofluorescence

Cell Line: MDA-MB-231 cells
Concentration: 0.5 μM, 1 μM, 2 μM
Incubation Time: 48 h
Result: Induced DNA damage and the accumulation of double-strand breaks, as indicated by increased γH2AX and comet tail length.

Cell Cycle Analysis

Cell Line: MDA-MB-231 cells
Concentration: 0.5 μM, 1 μM, 2 μM
Incubation Time: 48 h
Result: The proportion of cells in the S phase increased from 20.09% to 47.56%, while the proportion of cells in the G2/M phase decreased from 19.11% to 6.58%.

Apoptosis Analysis

Cell Line: MDA-MB-231 cells
Concentration: 0.5 μM, 1 μM, 2 μM
Incubation Time: 48 h
Result: The proportion of cells undergoing early and late apoptosis increased from 0.49% to 53.8%. 
体内研究
(In Vivo)

PARP1-IN-49 (compound 9a) (20, 40 mg/kg;腹腔注射;22 天) 显著抑制 MDA-MB-231 细胞皮下接种到 BALB/c 小鼠体内的肿瘤生长。

Animal Model: MDA-MB-231 cells (1 × 107 cells) were subcutaneously inoculated into the right flank of BALB/c nude mice (4-week-old)
Dosage: 20 mg/kg, 40 mg/kg
Administration: Intraperitoneal; 22 days
Result: Tumor growth was significantly inhibited.

化学信息

分子量 286.26
分子式 C15H11FN2O3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础