PRMT1-IN-3 是一种强效的蛋白精氨酸甲基转移酶 1 (PRMT1) 抑制剂(IC50 为 4.11 μM),可抑制 PRMT6 和 PRMT8(IC50 分别为 23.3 和 30.1 μM),并可抑制三阴性乳腺癌 (TNBC) 细胞中的不对称二甲基精氨酸 (ADMA) 水平和组蛋白 H4R3me2a 修饰,诱导 MDA-MB-231 细胞周期停滞、凋亡 (apoptosis),抑制细胞迁移和集落形成,作为 Paclitaxel 的化疗增敏剂,可用于 TNBC 的研究。
产品编号: MS-G84962 CAS No.: 892570-48-8 分子式: C18H23FN2O 分子量: 302.39
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PRMT1-IN-3 是一种强效的蛋白精氨酸甲基转移酶 1 (PRMT1) 抑制剂(IC50 为 4.11 μM),可抑制 PRMT6 和 PRMT8(IC50 分别为 23.3 和 30.1 μM),并可抑制三阴性乳腺癌 (TNBC) 细胞中的不对称二甲基精氨酸 (ADMA) 水平和组蛋白 H4R3me2a 修饰,诱导 MDA-MB-231 细胞周期停滞、凋亡 (apoptosis),抑制细胞迁移和集落形成,作为 Paclitaxel 的化疗增敏剂,可用于 TNBC 的研究。

生物实验数据

生物活性 PRMT1-IN-3 is a potent protein arginine methyltransferase 1 (PRMT1) inhibitor with an IC50 of 4.11 μM that inhibits PRMT6 and PRMT8 with IC50 values of 23.3 and 30.1 μM, respectively, suppresses asymmetric dimethylarginine (ADMA) levels and histone H4R3me2a modification in triple-negative breast cancer (TNBC) cells, induces cell cycle arrest and apoptosis and inhibits cell migration and colony formation in MDA-MB-231 cells, serves as a chemosensitizer for Paclitaxel, and can be used for TNBC research.
IC50 & Target PRMT1:4.11 μM
体外研究
(In Vitro)

PRMT1-IN-3 (Compound YH-4) (10 μM,37-65°C) 显著增强 PRMT1 的热稳定性 (ΔTm = +5.2°C),对其他 PRMT 亚型无显著影响。
PRMT1-IN-3 (0.01-100 μM,48 小时) 抑制 MDA-MB-231、HCT116、HeLa 和 A549 细胞生长,IC50 分别为 6.38 μM、15.29 μM、12.97 μM 和 9.187 μM。
PRMT1-IN-3 (1.25-10 μM,48小时) 以剂量依赖性方式抑制 MDA-MB-231 细胞中的 ADMA 水平和 H4R3me2a 修饰。
PRMT1-IN-3 (0-20 μM, 72 小时) (耐药指数:9.0) 在 MDA-MB-231 细胞和 MDA-MB-231/Taxol 细胞中与 Paclitaxel (PTX) (耐药指数:92.7) 表现出协同作用。
PRMT1-IN-3 (0-40 μM, 0-48 小时) 诱导 G0/G1 期停滞和细胞凋亡,并抑制 MDA-MB-231 细胞的细胞迁移。
PRMT1-IN-3 (0-20 μM, 10 天) 在 20 μM 浓度下几乎完全抑制 MDA-MB-231 细胞的集落形成。

Apoptosis Analysis

Cell Line: MDA-MB-231 cells
Concentration: 0, 5, 20 and 40 μM
Incubation Time: 48 h
Result: Resulted in an increase in early apoptosis from 2.34 % to 34.3 % from 2.5 μM to 40 μM.

Cell Cycle Analysis

Cell Line: MDA-MB-231 cells
Concentration: 0, 2.5, 5, 10, 20 μM
Incubation Time: 48 h
Result: Observed that the proportion of cells in the G0/G1 phase increased in a dose-dependent manner from 41.8 % to 60.9 %, while the proportions of cells in the S phase and G2/M phase decreased in a dose-dependent manner from 33.2 % to 23.6 % and from 24.9 % to 15.2 %, respectively.

Cell Migration Assay

Cell Line: MDA-MB-231 cells
Concentration: 1.25, 2.5, 5, 10 and 20 μM
Incubation Time: 0, 12, 36, and 48 h
Result: Decreased the healing rate to 18.52% after 48 h at 20 μM.
体内研究
(In Vivo)

PRMT1-IN-3 (Compound YH-4) (30 mg/kg,腹腔注射,持续一周,然后停药三天,共 21 天) 是 PTX 的化疗增敏剂,可增强其治疗效果,同时显著减少所需剂量并减轻其在 TNBC 小鼠模型中的毒副作用。

Animal Model: MDA-MB-23-YFP-Luc cells induced xenograft model established in female nude mice 4-5 weeks old weighing 16-18 g
Dosage: 30 mg/kg with or without PTX
Administration: Intraperitoneal injection (i.p.), for one week, then discontinue for three days, for a total of 21 days
Result: Demonstrated significant inhibitory effects on tumor volume, with the combination of PTX showing a markedly superior antitumor efficacy compared to the monotherapies.

化学信息

分子量 302.39
分子式 C18H23FN2O
CAS No. 892570-48-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础