GR-73632 是一种速激肽 NK1 受体激动剂,可激活脊髓 NK1 受体引发搔抓、啃咬、舔舐行为,激活外周 NK1 受体引发豚鼠流泪,激活中枢 NK1 受体引发沙鼠重复性后爪叩击行为,并可用于瘙痒症的相关研究。
产品编号: MS-G81453 纯度: 99.89% CAS No.: 133156-06-6 分子式: C40H59N7O6S 分子量: 766.00
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

GR-73632 是一种速激肽 NK1 受体激动剂,可激活脊髓 NK1 受体引发搔抓、啃咬、舔舐行为,激活外周 NK1 受体引发豚鼠流泪,激活中枢 NK1 受体引发沙鼠重复性后爪叩击行为,并可用于瘙痒症的相关研究。

生物实验数据

生物活性 GR-73632 is a tachykinin NK1 receptor agonist that activates spinal NK1 receptors to induce scratching, biting, and licking behaviors, activates peripheral NK1 receptors to induce tearing in guinea pigs, and activates central NK1 receptors to induce repetitive hind paw tapping behavior in gerbils, and can be used for research related to pruritus.
IC50 & Target

NK1R

 

体内研究
(In Vivo)

GR-73632 (0.1-2.5 pM;鞘内注射;单次给药) 在小鼠体内是一种强效脊髓 NK1 受体激动剂,可诱导呈剂量依赖性的搔抓、啃咬和舔舐行为综合征。
GR-73632 (10-200 nM;皮内注射;单次给药) 可在蒙古沙鼠中诱导剂量依赖性搔抓行为反应。

Animal Model: Std-ddY (male, 20-22 g)
Dosage: 0.1 pM; 0.5 pM; 2.5 pM; 8.0 nM (CP-96,345 (MS-M05679) co-administration)
Administration: i.t.; single injection
Result: Elicited a dose-dependent behavioral syndrome of scratching, biting, and licking, with peak response within the first 5 minutes post-injection and diminishing by 15 minutes.
Recorded total behavioral response time of 65.8 seconds over 0-5 minutes at 0.5 pM (i.t.), comparable to 100 pM (i.t.) substance P.
Caused 0.8 scratch episodes in the first 5 minutes at 0.5 pM (i.t.), significantly less than 14.6 scratch episodes from 100 pM (i.t.) substance P.
Was approximately 200-fold more potent than substance P in inducing the total scratching, biting, and licking behavioral response.
Markedly reduced induced behavioral response when co-administered with 8.0 nM (i.t.) CP-96,345, while co-administration with inactive enantiomer CP-96,344 had no effect.
Animal Model: Mongolian gerbil
Dosage: 10 nM; 30 nM; 100 nM; 200 nM; 100 nM/100 µl
Administration: i.d.; single injection
Result: Induced statistically significant scratching behaviour compared to vehicle controls at doses of 10 nM, 30 nM, 100 nM, and 200 nM (50 µl volume).
Produced a robust scratching response with a mean of ~11 scratching counts at the 10-minute time point, which was statistically significant compared to vehicle controls at the 100 nM/100 µl dose.
性状 固体
颜色 White to off-white

化学信息

分子量 766.00
分子式 C40H59N7O6S
CAS No. 133156-06-6

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (2.61 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

Sealed storage, away from moisture and light, under nitrogen

Powder -80°C 2 years
-20°C 1 year

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 100 mg/mL (130.55 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

H2O 中的溶解度 : 1 mg/mL (1.31 mM; 超声助溶)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM1.3055 mL6.5274 mL13.0548 mL32.6371 mL
DMSO5 mM0.2611 mL1.3055 mL2.6110 mL6.5274 mL
10 mM0.1305 mL0.6527 mL1.3055 mL3.2637 mL
15 mM0.0870 mL0.4352 mL0.8703 mL2.1758 mL
20 mM0.0653 mL0.3264 mL0.6527 mL1.6319 mL
25 mM0.0522 mL0.2611 mL0.5222 mL1.3055 mL
30 mM0.0435 mL0.2176 mL0.4352 mL1.0879 mL
40 mM0.0326 mL0.1632 mL0.3264 mL0.8159 mL
50 mM0.0261 mL0.1305 mL0.2611 mL0.6527 mL
60 mM0.0218 mL0.1088 mL0.2176 mL0.5440 mL
80 mM0.0163 mL0.0816 mL0.1632 mL0.4080 mL
100 mM0.0131 mL0.0653 mL0.1305 mL0.3264 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light, under nitrogen)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础