HDAC-IN-73 (compound P-503) 是一种组蛋白脱乙酰酶 (HDAC) 抑制剂,对 HDAC1 和 HDAC6 的 IC50 值分别为 0.17 µM 和 0.49 µM,值得注意的是其对 HDAC6 的抑制效力增强,疗效是 PsA (MS-Q24193) 的 9 倍 (IC50=3.9 µM),同时具有有效的抗增殖活性,可诱导细胞凋亡并导致细胞在 G2/M 期停滞,具有用于结肠癌等癌症研究的潜力。
产品编号: MS-G72116 CAS No.: 2323571-16-8 分子式: C22H24Br2N4O6Se2 分子量: 758.18
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

HDAC-IN-73 (compound P-503) 是一种组蛋白脱乙酰酶 (HDAC) 抑制剂,对 HDAC1 和 HDAC6 的 IC50 值分别为 0.17 µM 和 0.49 µM,值得注意的是其对 HDAC6 的抑制效力增强,疗效是 PsA (MS-Q24193) 的 9 倍 (IC50=3.9 µM),同时具有有效的抗增殖活性,可诱导细胞凋亡并导致细胞在 G2/M 期停滞,具有用于结肠癌等癌症研究的潜力。

生物实验数据

生物活性 HDAC-IN-73 (compound P-503) is a histone deacetylase (HDAC) inhibitor with IC50 values of 0.17 µM and 0.49 µM against HDAC1 and HDAC6, respectively; notably, it exhibits enhanced inhibitory potency toward HDAC6, being 9-fold more efficacious than PsA (MS-Q24193) (IC50=3.9 µM), and it possesses potent antiproliferative activity, induces apoptosis, and causes cell cycle arrest at the G2/M phase, showing potential for cancer research including colon cancer.
IC50 & Target HDAC1:0.17 μM, HDAC6:0.49 μM
体外研究
(In Vitro)

HDAC-IN-73 (compound P-503) (0-10 µM; 48 h)可抑制 HCT116 细胞的增殖,IC50 值为 0.24 µM,而 PsA 的IC50 值为 3.05 µM。
与PsA相比,HDAC-IN-73 (0.25-2 µM; 24 h) 可以增加 HCT116 细胞中组蛋白 H3 或 α - 微管蛋白的乙酰化水平。
HDAC-IN-73 (0.1-0.2 µM; 24 h) 可诱导 HCT116 细胞凋亡,并具有优于 PsA 的促凋亡作用。
HDAC-IN-73 (0.2-0.4 µM; 48 h) 可在 G2 / M 期诱导 HCT116 细胞周期停滞,而 PsA 增加 G1 期的比例。

Apoptosis Analysis

Cell Line: HCT116 cells
Concentration: 0.2, 0.4 µM
Incubation Time: 48 hours
Result: Induced apoptosis with 71.94 % of apoptotic cells (both early and late apoptotic cells) at define concentration of 0.4 μM, compared with PsA (56.5 %, 4 μM).

Cell Cycle Analysis

Cell Line: HCT116 cells
Concentration: 0.1, 0.2 µM
Incubation Time: 24 hours
Result: Induced cell cycle arrest at G2 / M phase while PsA increased proportion of G1 phase. HDAC-IN-73 with 0.1 μM and 0.2 μM can lead to 47.92 % and 74.56 % of the cells in G2 / M phase, respectively.

Western Blot Analysis

Cell Line: HCT116 cells
Concentration: 0.25, 0.5, 1, 2 µM
Incubation Time: 24 hours
Result: Increased the acetylation levels of histone H3 or α-tubulin in a dose dependent manner comparing with PsA.
体内研究
(In Vivo)

HDAC-IN-73 (compound P-503) (5 mg/kg; i.p.; every 2 days for 26 days) 在 HCT116 异种移植模型中剂量为 5 mg/kg 时有显著的抗肿瘤活性,但也存在更高的毒性,HDAC-IN-73的安全性和毒性剂量需要进一步研究。

Animal Model: 6 weeks, Female nude mice (BALB/c-nu) (HCT116 xenograft model)
Dosage: 5 mg/kg
Administration: I.p.; every 2 days for 26 days
Result: Reduced the tumor volume (p < 0.0001) and the tumor weight (p < 0.01). Exhibited the significant loss of body weight which has the same trend with the group of negative control. Inhibited the tumor growth (TGI = 74.6 %), while the TGI of SAHA (10 mg/kg, positive control) and PsA (10 mg/kg) were 13.1 % and 36.1 %, respectively.
Existed high toxicity, 2 mice died during the medication. Western blot tests showed that the acetylation levels of histone H3 or α-tubulin in tumor tissues were up-regulated.

化学信息

分子量 758.18
分子式 C22H24Br2N4O6Se2
CAS No. 2323571-16-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础