| 生物活性 | Fuscoside (OPC-21268) is an orally active, non-peptide vasopressin V1 receptor antagonist with an IC50 value of 0.4 μM. |
| IC50 & Target | V1 receptor(rat):25 nM, V1 receptor(human):8800 nM |
| 体外研究 (In Vitro) |
The concentration of Fuscoside (OPC-21268) that displaces 50% of specific AVP binding (IC50) is 0.4 μM for VI receptors and 100 μM for V2 receptors. The inhibition constant (Ki) of Fuscoside (OPC-21268) for V1 receptors (0.14 μM). |
| 体内研究 (In Vivo) |
Fuscoside (OPC-21268) competitively and specifically antagonizes pressor responses to AVP in vivo. Oral administration of Fuscoside (OPC-21268) (10 mg/kg) inhibits the vasoconstriction induced by exogenous AVP in a dose- and time-dependent manner and the effect lasts for more than 8 hours at 30 mg/kg. Fuscoside (OPC-21268) predominantly exerts a protective effect in areas where the maximum amount of blood-brain barrier breakdown occurs, and it is effective in the treatment of cold-induced vasogenic brain edema. Fuscoside (OPC-21268) treatment at the dosages of 200 and 300 mg/kg significantly reduces brain water content in both hemispheres. Swelling of the traumatized hemispheres is also significantly reduced at 200 and 300 mg/kg dosages. |
| 性状 | 固体 |
| 颜色 | White to off-white |
| 分子量 | 449.54 |
| 分子式 | C26H31N3O4 |
| CAS No. | 131631-89-5 |
| 别名 | OPC-21268 |
| 体内实验配方 | 10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (4.45 mM), Sonication is recommended. 请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 储存方式 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 50 mg/mL (111.22 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。