MEK-IN-10 是一种具有口服活性的泛 MEK/RAF 非降解分子胶 (molecular glue),对人源 MEK1 的 IC50 为 782 nM,可阻断 MEK 和 ERK 的磷酸化,诱导并稳定 MEK1-RAF 复合物,同时破坏 RAS-MAPK 信号通路,诱导癌细胞发生凋亡 (apoptosis) 并将细胞阻滞于 G0/G1 期,在小鼠异种移植模型中可诱导肿瘤生长抑制,可用于 RAS 驱动型癌症(如结直肠癌、胰腺癌)的研究。
产品编号: MS-G44127 CAS No.: 3096958-11-8 分子式: C22H21ClFN5O5S 分子量: 521.95
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

MEK-IN-10 是一种具有口服活性的泛 MEK/RAF 非降解分子胶 (molecular glue),对人源 MEK1 的 IC50 为 782 nM,可阻断 MEK 和 ERK 的磷酸化,诱导并稳定 MEK1-RAF 复合物,同时破坏 RAS-MAPK 信号通路,诱导癌细胞发生凋亡 (apoptosis) 并将细胞阻滞于 G0/G1 期,在小鼠异种移植模型中可诱导肿瘤生长抑制,可用于 RAS 驱动型癌症(如结直肠癌、胰腺癌)的研究。

生物实验数据

生物活性 MEK-IN-10 is an orally active pan-MEK/RAF non-degrading molecular glue with an IC50 of 782 nM against human MEK1; it blocks MEK and ERK phosphorylation, induces and stabilizes the MEK1-RAF complex, and disrupts the RAS-MAPK signaling pathway, induces apoptosis in cancer cells and arrests cells in the G0/G1 phase, and induces tumor growth inhibition in mouse xenograft models, making it useful for research on RAS-driven cancers such as colorectal cancer and pancreatic cancer.
IC50 & Target

MEK1

782 nM (IC50)

体外研究
(In Vitro)

MEK-IN-10 (D56) 可强效抑制 AsPC-1、MIA PaCa-2、HCT116、OCI-AML-3 和 HT-29 细胞的增殖,IC50 分别为 0.42、3.48、2.27、0.23、2.63 nM。
MEK-IN-10 (0-100 nM; 0-96 h) 抑制 AsPC-1 细胞中的 p-MEK (IC50 = 0.379 nM) 与 p-ERK (IC50 = 0.015 nM)。
MEK-IN-10 (0.01-10000 nM,60 min) 可作为分子胶水,在无细胞 TR-FRET 实验中强效稳定 MEK1-BRAF 复合物 (EC50 = 2.37 nM) 和 MEK1-CRAF 复合物 (EC50 = 11.95 nM)。
MEK-IN-10 (10 nM; 4 h) 可增强 HCT116 细胞中 MEK-BRAF 复合物的形成。
MEK-IN-10 (1-100 nM,10 天) 可呈剂量依赖性抑制 HCT116 和 AsPC-1 细胞的长期集落形成。
MEK-IN-10 (0-100 nM; 48 h) 诱导 AsPC-1、HCT116 和 OCI-AML-3 细胞发生凋亡,将细胞阻滞于 G0/G1 期。

Apoptosis Analysis

Cell Line: AsPC-1, HCT116 and OCI-AML-3 cells
Concentration: 0-100 nM
Incubation Time: 48 h
Result: Induced a dose-dependent increase in apoptotic cells: in AsPC-1 cells, the apoptotic population rose from 7.01% to 17.02%; in HCT116 cells, it rose from 17.08% to 76.0%.
Induced apoptosis in OCI-AML-3 cells.

Cell Cycle Analysis

Cell Line: AsPC-1, HCT116 and OCI-AML-3 cells
Concentration: 0-100 nM
Incubation Time: 48 h
Result: Induced dose-dependent accumulation of cells in the G0/G1 phase: in AsPC-1 cells, the G0/G1 population rose from 60.81% to 88.15%; in HCT116 cells, it rose from 42.42% to 75.2%.
Induced G0/G1 phase arrest in OCI-AML-3 cells.

Western Blot Analysis

Cell Line: AsPC-1 cells
Concentration: 0, 0.001, 0.003, 0.01, 0.03, 0.1, 0.3, 1, 3, 10, 30, 100 nM
Incubation Time: 4 h
Result: Inhibited p-MEK (IC50 = 0.379 nM) and p-ERK (IC50 = 0.015 nM).

Western Blot Analysis

Cell Line: AsPC-1 cells
Concentration: 3 nM
Incubation Time: 0, 0.25, 1, 4, 8, 24, 48, 72, 96 h
Result: Sustained suppression of both
p-MEK and p-ERK for over 96 h.
体内研究
(In Vivo)

MEK-IN-10 (1-10 mg/kg,口服,隔日 1 次×21-28 天) 可抑制 AsPC-1 (KRASG12D) 和 HCT116 (KRASG13D) 模型小鼠的肿瘤体积增长。

Animal Model: AsPC-1 (KRASG12D) model mice
Dosage: 1, 3, 10 mg/kg
Administration: p.o., QOD×28
Result: Inhibited tumor volume growth in a dose-dependent manne.
Exhibited obvious antitumor effects and the TGI rate was
79% at 10 mg/kg.
Significantly suppressed p-
ERK expression.
Animal Model: HCT116 (KRASG13D) model mice
Dosage: 1, 3 mg/kg
Administration: p.o., QOD×21
Result: Significantly inhibited tumor growth with TGI rates of 78% and 86%, respectively at 1 and 3 mg/kg.
Significantly suppressed p-
ERK expression.

化学信息

分子量 521.95
分子式 C22H21ClFN5O5S
CAS No. 3096958-11-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础